kernel/tools/perf/Documentation/perf-annotate.txt, branch linux-rolling-stable

perf annotate: Add --code-with-type support for TUI

2025-08-28T15:33:08Z

Until now, the --code-with-type option is available only on stdio. But it was an artifical limitation because of an implemention issue. Implement the same logic in annotation_line__write() for stdio2/TUI and remove the limitation and update the man page. Signed-off-by: Namhyung Kim Tested-by: Arnaldo Carvalho de Melo Cc: Adrian Hunter Cc: Ian Rogers Cc: Ingo Molnar Cc: Jiri Olsa Cc: Kan Liang Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20250816031635.25318-8-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Add --code-with-type option.

2025-03-13T07:19:51Z

This option is to show data type info in the regular (code) annotation. It tries to find data type for each (memory) instruction in the function. It'd be useful to see function-level memory access pattern and also to debug the data type profiling result. The output would be added at the end of the line and have "# data-type:" prefix. For now, it only works with --stdio mode for simplicity. I can work on enabling it for TUI later. $ perf annotate --stdio --code-with-type Percent | Source code & Disassembly of vmlinux for cpu/mem-loads/ppk (253 samples, percent: local period) --------------------------------------------------------------------------------------------------------------- : 0 0xffffffff81baa000 : 0.00 : ffffffff81baa000: pushq %r12 # data-type: (stack operation) 0.00 : ffffffff81baa002: pushq %rbp # data-type: (stack operation) 0.00 : ffffffff81baa003: pushq %rbx # data-type: (stack operation) 0.00 : ffffffff81baa004: subq $0x8, %rsp 18.00 : ffffffff81baa008: movl %gs:0x7e48893d(%rip), %ebx # 0x3294c # data-type: struct pcpu_hot +0xc (cpu_number) 12.58 : ffffffff81baa00f: movl %gs:0x7e488932(%rip), %eax # 0x32948 # data-type: struct pcpu_hot +0x8 (preempt_count) 0.00 : ffffffff81baa016: testl $0x7fffffff, %eax 0.00 : ffffffff81baa01b: je 0xffffffff81baa02c 0.00 : ffffffff81baa01d: addq $0x8, %rsp 0.00 : ffffffff81baa021: movl %ebx, %eax 14.19 : ffffffff81baa023: popq %rbx # data-type: (stack operation) 18.86 : ffffffff81baa024: popq %rbp # data-type: (stack operation) 12.10 : ffffffff81baa025: popq %r12 # data-type: (stack operation) 17.78 : ffffffff81baa027: jmp 0xffffffff81bc1170 <__x86_return_thunk> 6.49 : ffffffff81baa02c: callq *0xc9139e(%rip) # 0xffffffff8283b3d0 # data-type: (stack operation) 0.00 : ffffffff81baa032: testb $0x2, %ah 0.00 : ffffffff81baa035: je 0xffffffff81baa01d 0.00 : ffffffff81baa037: movq %rdi, %rbp 0.00 : ffffffff81baa03a: movq %gs:0x32940, %rax # data-type: struct pcpu_hot +0 (current_task) 0.00 : ffffffff81baa043: testb $0x4, 0x2f(%rax) # data-type: struct task_struct +0x2f (flags) 0.00 : ffffffff81baa047: je 0xffffffff81baa052 0.00 : ffffffff81baa049: cmpl $0x1, 0x3d0(%rax) # data-type: struct task_struct +0x3d0 (nr_cpus_allowed) 0.00 : ffffffff81baa050: je 0xffffffff81baa01d 0.00 : ffffffff81baa052: movq %gs:0x32940, %r12 # data-type: struct pcpu_hot +0 (current_task) 0.00 : ffffffff81baa05b: cmpw $0x0, 0x7f0(%r12) # data-type: struct task_struct +0x7f0 (migration_disabled) 0.00 : ffffffff81baa065: movq %rsi, (%rsp) 0.00 : ffffffff81baa069: jne 0xffffffff81baa01d 0.00 : ffffffff81baa06b: movl 0xe8dd13(%rip), %eax # 0xffffffff82a37d84 # data-type: enum system_states +0 0.00 : ffffffff81baa071: testl %eax, %eax 0.00 : ffffffff81baa073: je 0xffffffff81baa01d 0.00 : ffffffff81baa075: incl %gs:0x7e4888cc(%rip) # 0x32948 # data-type: struct pcpu_hot +0x8 (preempt_count) 0.00 : ffffffff81baa07c: movq $-0x7e14a100, %rdi 0.00 : ffffffff81baa083: callq 0xffffffff81148c40 <__printk_ratelimit> # data-type: (stack operation) 0.00 : ffffffff81baa088: testl %eax, %eax 0.00 : ffffffff81baa08a: je 0xffffffff81baa0d5 0.00 : ffffffff81baa08c: movl 0x958(%r12), %r9d # data-type: struct task_struct +0x958 (pid) 0.00 : ffffffff81baa094: movq (%rsp), %rdx # data-type: char* +0 0.00 : ffffffff81baa098: movq %rbp, %rsi 0.00 : ffffffff81baa09b: leaq 0xb88(%r12), %r8 # data-type: struct task_struct +0xb88 (comm) 0.00 : ffffffff81baa0a3: movl %gs:0x7e48889e(%rip), %ecx # 0x32948 # data-type: struct pcpu_hot +0x8 (preempt_count) 0.00 : ffffffff81baa0aa: andl $0x7fffffff, %ecx 0.00 : ffffffff81baa0b0: movq $-0x7dd3cdf0, %rdi 0.00 : ffffffff81baa0b7: subl $0x1, %ecx 0.00 : ffffffff81baa0ba: callq 0xffffffff81149340 <_printk> # data-type: (stack operation) 0.00 : ffffffff81baa0bf: movq 0x20(%rsp), %rsi 0.00 : ffffffff81baa0c4: movq $-0x7ddb8c7e, %rdi 0.00 : ffffffff81baa0cb: callq 0xffffffff81149340 <_printk> # data-type: (stack operation) 0.00 : ffffffff81baa0d0: callq 0xffffffff81b7ab60 # data-type: (stack operation) 0.00 : ffffffff81baa0d5: decl %gs:0x7e48886c(%rip) # 0x32948 # data-type: struct pcpu_hot +0x8 (preempt_count) 0.00 : ffffffff81baa0dc: jmp 0xffffffff81baa01d Reviewed-by: Ian Rogers Link: https://lore.kernel.org/r/20250310224925.799005-8-namhyung@kernel.org Signed-off-by: Namhyung Kim

perf annotate: Add --skip-empty option

2024-08-05T19:14:01Z

Like in 'perf report', we want to hide empty events in the 'perf annotate' output. This is consistent when the option is set in perf report. For example, the following command would use 3 events including dummy. $ perf mem record -a -- perf test -w noploop $ perf evlist cpu/mem-loads,ldlat=30/P cpu/mem-stores/P dummy:u Just using perf annotate with --group will show the all 3 events. $ perf annotate --group --stdio | head Percent | Source code & Disassembly of ... -------------------------------------------------------------- : 0 0xe060 <_dl_relocate_object>: 0.00 0.00 0.00 : e060: pushq %rbp 0.00 0.00 0.00 : e061: movq %rsp, %rbp 0.00 0.00 0.00 : e064: pushq %r15 0.00 0.00 0.00 : e066: movq %rdi, %r15 0.00 0.00 0.00 : e069: pushq %r14 0.00 0.00 0.00 : e06b: pushq %r13 0.00 0.00 0.00 : e06d: movl %edx, %r13d Now with --skip-empty, it'll hide the last dummy event. $ perf annotate --group --stdio --skip-empty | head Percent | Source code & Disassembly of ... ------------------------------------------------------ : 0 0xe060 <_dl_relocate_object>: 0.00 0.00 : e060: pushq %rbp 0.00 0.00 : e061: movq %rsp, %rbp 0.00 0.00 : e064: pushq %r15 0.00 0.00 : e066: movq %rdi, %r15 0.00 0.00 : e069: pushq %r14 0.00 0.00 : e06b: pushq %r13 0.00 0.00 : e06d: movl %edx, %r13d Committer testing: root@x1:~# perf evlist cpu_atom/mem-loads,ldlat=30/P cpu_atom/mem-stores/P dummy:u root@x1:~# Before: root@x1:~# perf annotate --group --stdio2 do_lookup_x | head -25 Samples: 20 of events 'cpu_atom/mem-loads,ldlat=30/P, cpu_atom/mem-stores/P, dummy:u', 4000 Hz, Event count (approx.): 769079, [percent: local period] do_lookup_x() /usr/lib64/ld-linux-x86-64.so.2 Percent 0x9900 : pushq %rbp movq %rsp,%rbp pushq %r15 pushq %r14 pushq %r13 pushq %r12 pushq %rbx subq $0x88,%rsp movq %rdi,-0x50(%rbp) movl 8(%r9),%edi movq 0x10(%rbp),%r12 movq 0x28(%rbp),%r10 movq %rdx,-0x70(%rbp) movq %rcx,-0x58(%rbp) movq %rdi,%r11 0.00 5.73 0.00 movq %r8,-0x68(%rbp) movq (%r9),%r8 movl %esi,%eax 8.30 0.00 0.00 movl 0x30(%rbp),%r9d movl %esi,%r15d shrl $6, %eax movq %r8,%r13 root@x1:~# After: root@x1:~# perf annotate --group --skip-empty --stdio2 do_lookup_x | head -25 Samples: 20 of events 'cpu_atom/mem-loads,ldlat=30/P, cpu_atom/mem-stores/P', 4000 Hz, Event count (approx.): 769079, [percent: local period] do_lookup_x() /usr/lib64/ld-linux-x86-64.so.2 Percent 0x9900 : pushq %rbp movq %rsp,%rbp pushq %r15 pushq %r14 pushq %r13 pushq %r12 pushq %rbx subq $0x88,%rsp movq %rdi,-0x50(%rbp) movl 8(%r9),%edi movq 0x10(%rbp),%r12 movq 0x28(%rbp),%r10 movq %rdx,-0x70(%rbp) movq %rcx,-0x58(%rbp) movq %rdi,%r11 0.00 5.73 movq %r8,-0x68(%rbp) movq (%r9),%r8 movl %esi,%eax 8.30 0.00 movl 0x30(%rbp),%r9d movl %esi,%r15d shrl $6, %eax movq %r8,%r13 root@x1:~# Signed-off-by: Namhyung Kim Tested-by: Arnaldo Carvalho de Melo Cc: Adrian Hunter Cc: Ian Rogers Cc: Ingo Molnar Cc: Jiri Olsa Cc: Kan Liang Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20240803211332.1107222-6-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Add --type-stat option for debugging

2023-12-24T01:40:13Z

The --type-stat option is to be used with --data-type and to print detailed failure reasons for the data type annotation. $ perf annotate --data-type --type-stat Annotate data type stats: total 294, ok 116 (39.5%), bad 178 (60.5%) ----------------------------------------------------------- 30 : no_sym 40 : no_insn_ops 33 : no_mem_ops 63 : no_var 4 : no_typeinfo 8 : bad_offset Signed-off-by: Namhyung Kim Tested-by: Arnaldo Carvalho de Melo Cc: Adrian Hunter Cc: Ian Rogers Cc: Ingo Molnar Cc: Jiri Olsa Cc: Linus Torvalds Cc: Masami Hiramatsu Cc: Peter Zijlstra Cc: Stephane Eranian Cc: linux-toolchains@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Link: https://lore.kernel.org/r/20231213001323.718046-17-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Add --data-type option

2023-12-24T01:39:43Z

Support data type annotation with new --data-type option. It internally uses type sort key to collect sample histogram for the type and display every members like below. $ perf annotate --data-type ... Annotate type: 'struct cfs_rq' in [kernel.kallsyms] (13 samples): ============================================================================ samples offset size field 13 0 640 struct cfs_rq { 2 0 16 struct load_weight load { 2 0 8 unsigned long weight; 0 8 4 u32 inv_weight; }; 0 16 8 unsigned long runnable_weight; 0 24 4 unsigned int nr_running; 1 28 4 unsigned int h_nr_running; ... For simplicity it prints the number of samples per field for now. But it should be easy to show the overhead percentage instead. The number at the outer struct is a sum of the numbers of the inner members. For example, struct cfs_rq got total 13 samples, and 2 came from the load (struct load_weight) and 1 from h_nr_running. Similarly, the struct load_weight got total 2 samples and they all came from the weight field. I've added two new flags in the symbol_conf for this. The annotate_data_member is to get the members of the type. This is also needed for perf report with typeoff sort key. The annotate_data_sample is to update sample stats for each offset and used only in annotate. Currently it only support stdio output mode, TUI support can be added later. Committer testing: With the perf.data from the previous csets, a very simple, short duration one: # perf annotate --data-type Annotate type: 'struct list_head' in [kernel.kallsyms] (1 samples): ============================================================================ samples offset size field 1 0 16 struct list_head { 0 0 8 struct list_head* next; 1 8 8 struct list_head* prev; }; Annotate type: 'char' in [kernel.kallsyms] (1 samples): ============================================================================ samples offset size field 1 0 1 char ; # Signed-off-by: Namhyung Kim Tested-by: Arnaldo Carvalho de Melo Cc: Adrian Hunter Cc: Ian Rogers Cc: Ingo Molnar Cc: Jiri Olsa Cc: Linus Torvalds Cc: Masami Hiramatsu Cc: Peter Zijlstra Cc: Stephane Eranian Cc: linux-toolchains@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Link: https://lore.kernel.org/r/20231213001323.718046-15-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf symbol: Add command line support for addr2line path

2023-04-04T12:39:56Z

Allow addr2line to be set either on the command line or via the perfconfig file. This doesn't currently work with llvm-addr2line as the addr2line code emits two things: 1) the address to decode, 2) a bogus ',' value. The expectation is the bogus value will generate: ?? ??:0 that terminates the addr2line reading. However, the output from llvm-addr2line is a single line with just the input ',' locking up the addr2line reading that is expecting a second line. Signed-off-by: Ian Rogers Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Andi Kleen Cc: Andres Freund Cc: German Gomez Cc: Ingo Molnar Cc: James Clark Cc: Jiri Olsa Cc: Kan Liang Cc: Mark Rutland Cc: Namhyung Kim Cc: Nathan Chancellor Cc: Nick Desaulniers Cc: Peter Zijlstra Cc: Sandipan Das Cc: Tom Rix Cc: llvm@lists.linux.dev Link: https://lore.kernel.org/r/20230328235543.1082207-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo

perf tools: Make quiet mode consistent between tools

2022-10-27T19:37:26Z

Use the global quiet variable everywhere so that all tools hide warnings in quiet mode and update the documentation to reflect this. 'perf probe' claimed that errors are not printed in quiet mode but I don't see this so remove it from the docs. Signed-off-by: James Clark Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Ian Rogers Cc: Ingo Molnar Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20221018094137.783081-3-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Add --percent-limit option

2022-05-10T17:37:55Z

Like in 'perf report' and 'perf top', Add this option to limit the number of functions it displays based on the overhead value in percent. This affects only stdio and stdio2 output modes. Without this, it shows very long disassembly lines for every function in the data file. If users don't want this behavior, they can set a value in percent to suppress that. Signed-off-by: Namhyung Kim Cc: Andi Kleen Cc: Ian Rogers Cc: Jiri Olsa Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20220502232015.697243-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Add itrace options support

2021-06-16T18:07:42Z

The "auxtrace_info" and "auxtrace" functions are not set in "tool" member of "annotate". As a result, perf annotate does not support parsing itrace data. Before: # perf record -e arm_spe_0/branch_filter=1/ -a sleep 1 [ perf record: Woken up 9 times to write data ] [ perf record: Captured and wrote 20.874 MB perf.data ] # perf annotate --stdio Error: The perf.data data has no samples! Solution: 1. Add itrace options in help, 2. Set hook functions of "id_index", "auxtrace_info" and "auxtrace" in perf_tool. After: # perf record --all-user -e arm_spe_0/branch_filter=1/ ls Couldn't synthesize bpf events. perf.data [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.010 MB perf.data ] # perf annotate --stdio Percent | Source code & Disassembly of libc-2.28.so for branch-miss (1 samples, percent: local period) ------------------------------------------------------------------------------------------------------------ : : : : Disassembly of section .text: : : 0000000000066180 <__getdelim@@GLIBC_2.17>: 0.00 : 66180: stp x29, x30, [sp, #-96]! 0.00 : 66184: cmp x0, #0x0 0.00 : 66188: ccmp x1, #0x0, #0x4, ne // ne = any 0.00 : 6618c: mov x29, sp 0.00 : 66190: stp x24, x25, [sp, #56] 0.00 : 66194: stp x26, x27, [sp, #72] 0.00 : 66198: str x28, [sp, #88] 0.00 : 6619c: b.eq 66450 <__getdelim@@GLIBC_2.17+0x2d0> // b.none 0.00 : 661a0: stp x22, x23, [x29, #40] 0.00 : 661a4: mov x22, x1 0.00 : 661a8: ldr w1, [x3] 0.00 : 661ac: mov w23, w2 0.00 : 661b0: stp x20, x21, [x29, #24] 0.00 : 661b4: mov x20, x3 0.00 : 661b8: mov x21, x0 0.00 : 661bc: tbnz w1, #15, 66360 <__getdelim@@GLIBC_2.17+0x1e0> 0.00 : 661c0: ldr x0, [x3, #136] 0.00 : 661c4: ldr x2, [x0, #8] 0.00 : 661c8: str x19, [x29, #16] 0.00 : 661cc: mrs x19, tpidr_el0 0.00 : 661d0: sub x19, x19, #0x700 0.00 : 661d4: cmp x2, x19 0.00 : 661d8: b.eq 663f0 <__getdelim@@GLIBC_2.17+0x270> // b.none 0.00 : 661dc: mov w1, #0x1 // #1 0.00 : 661e0: ldaxr w2, [x0] 0.00 : 661e4: cmp w2, #0x0 0.00 : 661e8: b.ne 661f4 <__getdelim@@GLIBC_2.17+0x74> // b.any 0.00 : 661ec: stxr w3, w1, [x0] 0.00 : 661f0: cbnz w3, 661e0 <__getdelim@@GLIBC_2.17+0x60> 0.00 : 661f4: b.ne 66448 <__getdelim@@GLIBC_2.17+0x2c8> // b.any 0.00 : 661f8: ldr x0, [x20, #136] 0.00 : 661fc: ldr w1, [x20] 0.00 : 66200: ldr w2, [x0, #4] 0.00 : 66204: str x19, [x0, #8] 0.00 : 66208: add w2, w2, #0x1 0.00 : 6620c: str w2, [x0, #4] 0.00 : 66210: tbnz w1, #5, 66388 <__getdelim@@GLIBC_2.17+0x208> 0.00 : 66214: ldr x19, [x29, #16] 0.00 : 66218: ldr x0, [x21] 0.00 : 6621c: cbz x0, 66228 <__getdelim@@GLIBC_2.17+0xa8> 0.00 : 66220: ldr x0, [x22] 0.00 : 66224: cbnz x0, 6623c <__getdelim@@GLIBC_2.17+0xbc> 0.00 : 66228: mov x0, #0x78 // #120 0.00 : 6622c: str x0, [x22] 0.00 : 66230: bl 20710 0.00 : 66234: str x0, [x21] 0.00 : 66238: cbz x0, 66428 <__getdelim@@GLIBC_2.17+0x2a8> 0.00 : 6623c: ldr x27, [x20, #8] 0.00 : 66240: str x19, [x29, #16] 0.00 : 66244: ldr x19, [x20, #16] 0.00 : 66248: sub x19, x19, x27 0.00 : 6624c: cmp x19, #0x0 0.00 : 66250: b.le 66398 <__getdelim@@GLIBC_2.17+0x218> 0.00 : 66254: mov x25, #0x0 // #0 0.00 : 66258: b 662d8 <__getdelim@@GLIBC_2.17+0x158> 0.00 : 6625c: nop 0.00 : 66260: add x24, x19, x25 0.00 : 66264: ldr x3, [x22] 0.00 : 66268: add x26, x24, #0x1 0.00 : 6626c: ldr x0, [x21] 0.00 : 66270: cmp x3, x26 0.00 : 66274: b.cs 6629c <__getdelim@@GLIBC_2.17+0x11c> // b.hs, b.nlast 0.00 : 66278: lsl x3, x3, #1 0.00 : 6627c: cmp x3, x26 0.00 : 66280: csel x26, x3, x26, cs // cs = hs, nlast 0.00 : 66284: mov x1, x26 0.00 : 66288: bl 206f0 0.00 : 6628c: cbz x0, 66438 <__getdelim@@GLIBC_2.17+0x2b8> 0.00 : 66290: str x0, [x21] 0.00 : 66294: ldr x27, [x20, #8] 0.00 : 66298: str x26, [x22] 0.00 : 6629c: mov x2, x19 0.00 : 662a0: mov x1, x27 0.00 : 662a4: add x0, x0, x25 0.00 : 662a8: bl 87390 0.00 : 662ac: ldr x0, [x20, #8] 0.00 : 662b0: add x19, x0, x19 0.00 : 662b4: str x19, [x20, #8] 0.00 : 662b8: cbnz x28, 66410 <__getdelim@@GLIBC_2.17+0x290> 0.00 : 662bc: mov x0, x20 0.00 : 662c0: bl 73b80 <__underflow@@GLIBC_2.17> 0.00 : 662c4: cmn w0, #0x1 0.00 : 662c8: b.eq 66410 <__getdelim@@GLIBC_2.17+0x290> // b.none 0.00 : 662cc: ldp x27, x19, [x20, #8] 0.00 : 662d0: mov x25, x24 0.00 : 662d4: sub x19, x19, x27 0.00 : 662d8: mov x2, x19 0.00 : 662dc: mov w1, w23 0.00 : 662e0: mov x0, x27 0.00 : 662e4: bl 807b0 0.00 : 662e8: cmp x0, #0x0 0.00 : 662ec: mov x28, x0 0.00 : 662f0: sub x0, x0, x27 0.00 : 662f4: csinc x19, x19, x0, eq // eq = none 0.00 : 662f8: mov x0, #0x7fffffffffffffff // #9223372036854775807 0.00 : 662fc: sub x0, x0, x25 0.00 : 66300: cmp x19, x0 0.00 : 66304: b.lt 66260 <__getdelim@@GLIBC_2.17+0xe0> // b.tstop 0.00 : 66308: adrp x0, 17f000 0.00 : 6630c: ldr x0, [x0, #3624] 0.00 : 66310: mrs x2, tpidr_el0 0.00 : 66314: ldr x19, [x29, #16] 0.00 : 66318: mov w3, #0x4b // #75 0.00 : 6631c: ldr w1, [x20] 0.00 : 66320: mov x24, #0xffffffffffffffff // #-1 0.00 : 66324: str w3, [x2, x0] 0.00 : 66328: tbnz w1, #15, 66340 <__getdelim@@GLIBC_2.17+0x1c0> 0.00 : 6632c: ldr x0, [x20, #136] 0.00 : 66330: ldr w1, [x0, #4] 0.00 : 66334: sub w1, w1, #0x1 0.00 : 66338: str w1, [x0, #4] 0.00 : 6633c: cbz w1, 663b8 <__getdelim@@GLIBC_2.17+0x238> 0.00 : 66340: mov x0, x24 0.00 : 66344: ldr x28, [sp, #88] 0.00 : 66348: ldp x20, x21, [x29, #24] 0.00 : 6634c: ldp x22, x23, [x29, #40] 0.00 : 66350: ldp x24, x25, [sp, #56] 0.00 : 66354: ldp x26, x27, [sp, #72] 0.00 : 66358: ldp x29, x30, [sp], #96 0.00 : 6635c: ret 100.00 : 66360: tbz w1, #5, 66218 <__getdelim@@GLIBC_2.17+0x98> 0.00 : 66364: ldp x20, x21, [x29, #24] 0.00 : 66368: mov x24, #0xffffffffffffffff // #-1 0.00 : 6636c: ldp x22, x23, [x29, #40] 0.00 : 66370: mov x0, x24 0.00 : 66374: ldp x24, x25, [sp, #56] 0.00 : 66378: ldp x26, x27, [sp, #72] 0.00 : 6637c: ldr x28, [sp, #88] 0.00 : 66380: ldp x29, x30, [sp], #96 0.00 : 66384: ret 0.00 : 66388: mov x24, #0xffffffffffffffff // #-1 0.00 : 6638c: ldr x19, [x29, #16] 0.00 : 66390: b 66328 <__getdelim@@GLIBC_2.17+0x1a8> 0.00 : 66394: nop 0.00 : 66398: mov x0, x20 0.00 : 6639c: bl 73b80 <__underflow@@GLIBC_2.17> 0.00 : 663a0: cmn w0, #0x1 0.00 : 663a4: b.eq 66438 <__getdelim@@GLIBC_2.17+0x2b8> // b.none 0.00 : 663a8: ldp x27, x19, [x20, #8] 0.00 : 663ac: sub x19, x19, x27 0.00 : 663b0: b 66254 <__getdelim@@GLIBC_2.17+0xd4> 0.00 : 663b4: nop 0.00 : 663b8: str xzr, [x0, #8] 0.00 : 663bc: ldxr w2, [x0] 0.00 : 663c0: stlxr w3, w1, [x0] 0.00 : 663c4: cbnz w3, 663bc <__getdelim@@GLIBC_2.17+0x23c> 0.00 : 663c8: cmp w2, #0x1 0.00 : 663cc: b.le 66340 <__getdelim@@GLIBC_2.17+0x1c0> 0.00 : 663d0: mov x1, #0x81 // #129 0.00 : 663d4: mov x2, #0x1 // #1 0.00 : 663d8: mov x3, #0x0 // #0 0.00 : 663dc: mov x8, #0x62 // #98 0.00 : 663e0: svc #0x0 0.00 : 663e4: ldp x20, x21, [x29, #24] 0.00 : 663e8: ldp x22, x23, [x29, #40] 0.00 : 663ec: b 66370 <__getdelim@@GLIBC_2.17+0x1f0> 0.00 : 663f0: ldr w2, [x0, #4] 0.00 : 663f4: add w2, w2, #0x1 0.00 : 663f8: str w2, [x0, #4] 0.00 : 663fc: tbz w1, #5, 66214 <__getdelim@@GLIBC_2.17+0x94> 0.00 : 66400: mov x24, #0xffffffffffffffff // #-1 0.00 : 66404: ldr x19, [x29, #16] 0.00 : 66408: b 66330 <__getdelim@@GLIBC_2.17+0x1b0> 0.00 : 6640c: nop 0.00 : 66410: ldr x0, [x21] 0.00 : 66414: strb wzr, [x0, x24] 0.00 : 66418: ldr w1, [x20] 0.00 : 6641c: ldr x19, [x29, #16] 0.00 : 66420: b 66328 <__getdelim@@GLIBC_2.17+0x1a8> 0.00 : 66424: nop 0.00 : 66428: mov x24, #0xffffffffffffffff // #-1 0.00 : 6642c: ldr w1, [x20] 0.00 : 66430: b 66328 <__getdelim@@GLIBC_2.17+0x1a8> 0.00 : 66434: nop 0.00 : 66438: mov x24, #0xffffffffffffffff // #-1 0.00 : 6643c: ldr w1, [x20] 0.00 : 66440: ldr x19, [x29, #16] 0.00 : 66444: b 66328 <__getdelim@@GLIBC_2.17+0x1a8> 0.00 : 66448: bl e3ba0 0.00 : 6644c: b 661f8 <__getdelim@@GLIBC_2.17+0x78> 0.00 : 66450: adrp x0, 17f000 0.00 : 66454: ldr x0, [x0, #3624] 0.00 : 66458: mrs x1, tpidr_el0 0.00 : 6645c: mov w2, #0x16 // #22 0.00 : 66460: mov x24, #0xffffffffffffffff // #-1 0.00 : 66464: str w2, [x1, x0] 0.00 : 66468: b 66370 <__getdelim@@GLIBC_2.17+0x1f0> 0.00 : 6646c: ldr w1, [x20] 0.00 : 66470: mov x4, x0 0.00 : 66474: tbnz w1, #15, 6648c <__getdelim@@GLIBC_2.17+0x30c> 0.00 : 66478: ldr x0, [x20, #136] 0.00 : 6647c: ldr w1, [x0, #4] 0.00 : 66480: sub w1, w1, #0x1 0.00 : 66484: str w1, [x0, #4] 0.00 : 66488: cbz w1, 66494 <__getdelim@@GLIBC_2.17+0x314> 0.00 : 6648c: mov x0, x4 0.00 : 66490: bl 20e40 0.00 : 66494: str xzr, [x0, #8] 0.00 : 66498: ldxr w2, [x0] 0.00 : 6649c: stlxr w3, w1, [x0] 0.00 : 664a0: cbnz w3, 66498 <__getdelim@@GLIBC_2.17+0x318> 0.00 : 664a4: cmp w2, #0x1 0.00 : 664a8: b.le 6648c <__getdelim@@GLIBC_2.17+0x30c> 0.00 : 664ac: mov x1, #0x81 // #129 0.00 : 664b0: mov x2, #0x1 // #1 0.00 : 664b4: mov x3, #0x0 // #0 0.00 : 664b8: mov x8, #0x62 // #98 0.00 : 664bc: svc #0x0 0.00 : 664c0: b 6648c <__getdelim@@GLIBC_2.17+0x30c> Signed-off-by: Yang Jihong Tested-by: Leo Yan Acked-by: Adrian Hunter Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/20210615091704.259202-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo

perf annotate: Add --demangle and --demangle-kernel

2021-03-31T13:39:48Z

'perf annotate' supports --symbol but it's impossible to filter a C++ symbol. With --no-demangle one can filter easily by mangled function name. Signed-off-by: Martin Liška Link: http://lore.kernel.org/lkml/c3c7e959-9f7f-18e2-e795-f604275cbac3@suse.cz Signed-off-by: Arnaldo Carvalho de Melo