kernel/sound/soc/sof/sof-audio.h, branch linux-6.2.y

ASoC: SOF: Add DAI configuration support for AMD platforms.

2022-11-29T12:56:09Z

Add support for configuring sp and hs DAI from topology. Signed-off-by: V sujith kumar Reddy Link: https://lore.kernel.org/r/20221129100102.826781-1-vsujithkumar.reddy@amd.corp-partner.google.com Signed-off-by: Mark Brown

ASoC: SOF: topology: Add helper to get/put widget queue id

2022-11-07T13:58:11Z

Add get/put queue id helper to manage queue id in route setup and route free. The queue allocation rules are: - If widget only has one sink/source pin, zero will be returned as the queue ID directly. - If widget has more than one sink/source pins, and pin binding array is defined in topology, queue ID will be allocated according to the pin binding array. - If widget has more than one sink/sink pins, and pin binding array is not defined, Linux ID allocation will be used to allocate queue ID dynamically. Signed-off-by: Chao Song Signed-off-by: Bard Liao Suggested-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Péter Ujfalusi Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20221107085706.2550-4-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: Add support to parse pin binding array from topology

2022-11-07T13:58:10Z

Add support for parsing sink/source pin binding array per widget from topology. The pin binding arrays will be used to determine the source and sink queue IDs during widget binding for widget that requires special pin binding. An example of widget that requires special pin binding is the smart amplifier widget, its feedback sink pin has to be connected to a capture DAI copier for codec feedback, while the other sink pin has to be connected to a host DAI copier. Pin ID is required during widget binding for correct route setup. Conversely, the pin ID for 'generic' pins is not defined in the topology and will be allocated by the kernel dynamically. When only one pin is supported, the pin ID shall always be zero. When more than one pin is supported, the pin ID is determined with the ID allocation mechanism in the kernel. Signed-off-by: Chao Song Signed-off-by: Bard Liao Suggested-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Péter Ujfalusi Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20221107085706.2550-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: Add support for parsing the number of sink/source pins

2022-11-07T13:58:09Z

Add support for parsing the number of sink/source pins per widget from topology. They will be used to determine the sink/source queue IDs during widget binding. Signed-off-by: Bard Liao Signed-off-by: Chao Song Suggested-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Péter Ujfalusi Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20221107085706.2550-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: topology: add code to parse config params for ACPDMIC dai

2022-06-14T10:22:10Z

Add sof_ipc_dai_acpdmic_params and tokens to parse dmic channels and rate params from topology file Signed-off-by: Ajit Kumar Pandey Reviewed-by: Ranjani Sridharan Reviewed-by: Péter Ujfalusi Reviewed-by: Pierre-Louis Bossart Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20220614075251.21499-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: Add a new IPC op for parsing topology manifest

2022-06-10T12:32:08Z

Add a new topology IPC op, parse_manifest. Define and set the op for IPC4 and IPC4. Co-developed-by: Jaska Uimonen Signed-off-by: Jaska Uimonen Signed-off-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Reviewed-by: Bard Liao Link: https://lore.kernel.org/r/20220609032643.916882-21-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4-topology: Add support for parsing and preparing pga widgets

2022-06-10T12:31:55Z

Add support for parsing and preparing pga type widgets. Define the token ID's and the associated token arrays needed to parse these widgets. Co-developed-by: Rander Wang Signed-off-by: Rander Wang Co-developed-by: Bard Liao Signed-off-by: Bard Liao Signed-off-by: Ranjani Sridharan Reviewed-by: Péter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Paul Olaru Link: https://lore.kernel.org/r/20220609032643.916882-8-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: ipc4-topology: Add support for parsing AIF_IN/AIF_OUT widgets

2022-06-10T12:31:51Z

Add support for parsing AIF_IN/AIF_OUT type widgets in IPC4. Add all the new required token ID's for parsing these widgets to the list of tokens in enum sof_tokens and the definitions of the token arrays corresponding to each of the token ID's. Also, upgrade the sof_widget_parse_tokens() function in the common topology parser to be able to parse multiple sets of tokens for the audio format and copier gateway config tokens. Co-developed-by: Rander Wang Signed-off-by: Rander Wang Co-developed-by: Bard Liao Signed-off-by: Bard Liao Signed-off-by: Ranjani Sridharan Reviewed-by: Péter Ujfalusi Reviewed-by: Pierre-Louis Bossart Reviewed-by: Paul Olaru Link: https://lore.kernel.org/r/20220609032643.916882-4-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: Add a prepare op to IPC topology widget ops

2022-04-29T12:06:05Z

In order to set up a pipeline with IPC4, the total memory usage for the pipeline needs to be calculated based on the list of connected widgets. Add a new ipc_prepare() op to struct sof_ipc_tplg_widget_ops that will be used to calculate the memory usage for each widget in the pipelines associated with a PCM and prepare the widget for getting set up in the DSP. The prepare step will be used to allocate memory for the IPC payload, assign instance ID and update the config data for the widget based on the runtime PCM params. Once prepared, the setup step is used to send the IPC to create the widget in the DSP. Add an ipc_unprepare() op to unprepare the widget i.e free the memory allocated during prepare, free the instance ID etc. This should be invoked after the widget is freed. A new flag "prepared" is added to struct snd_sof_widget to track the prepared status of widgets. Also, IPC4 requires the platform_params and the runtime PCM params in order to prepare a widget for set up. So modify the signature of sof_pcm_setup_connected_widgets() and sof_widget_list_setup() to accept these as arguments. Signed-off-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Reviewed-by: Bard Liao Link: https://lore.kernel.org/r/20220426171743.171061-12-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown

ASoC: SOF: clarify use of widget complete flag

2022-04-29T12:06:04Z

Currently, the complete flag is used only for the snd_soc_dapm_scheduler type widgets to indicate that the pipeline has been set up. All other widgets do not need it. Add a comment to clarify its usage and set the complete flag to false only for the scheduler widget in sof_widget_free(). Signed-off-by: Ranjani Sridharan Reviewed-by: Pierre-Louis Bossart Reviewed-by: Péter Ujfalusi Reviewed-by: Bard Liao Link: https://lore.kernel.org/r/20220426171743.171061-11-ranjani.sridharan@linux.intel.com Signed-off-by: Mark Brown