kernel/security/integrity/ima/ima_crypto.c, branch linux-5.1.y

tpm: retrieve digest size of unknown algorithms with PCR read

2019-02-13T07:48:51Z

Currently, the TPM driver retrieves the digest size from a table mapping TPM algorithms identifiers to identifiers defined by the crypto subsystem. If the algorithm is not defined by the latter, the digest size can be retrieved from the output of the PCR read command. The patch modifies the definition of tpm_pcr_read() and tpm2_pcr_read() to pass the desired hash algorithm and obtain the digest size at TPM startup. Algorithms and corresponding digest sizes are stored in the new structure tpm_bank_info, member of tpm_chip, so that the information can be used by other kernel subsystems. tpm_bank_info contains: the TPM algorithm identifier, necessary to generate the event log as defined by Trusted Computing Group (TCG); the digest size, to pad/truncate a digest calculated with a different algorithm; the crypto subsystem identifier, to calculate the digest of event data. This patch also protects against data corruption that could happen in the bus, by checking that the digest size returned by the TPM during a PCR read matches the size of the algorithm passed to tpm2_pcr_read(). For the initial PCR read, when digest sizes are not yet available, this patch ensures that the amount of data copied from the output returned by the TPM does not exceed the size of the array data are copied to. Signed-off-by: Roberto Sassu Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Acked-by: Mimi Zohar Signed-off-by: Jarkko Sakkinen

tpm: use u32 instead of int for PCR index

2018-11-13T11:46:31Z

The TPM specs defines PCR index as a positive number, and there is no reason to use a signed number. It is also a possible security issue as currently no functions check for a negative index, which may become a large number when converted to u32. Adjust the API to use u32 instead of int in all PCR related functions. Signed-off-by: Tomas Winkler Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

ima: open a new file instance if no read permissions

2018-10-10T19:18:00Z

Open a new file instance as opposed to changing file->f_mode when the file is not readable. This is done to accomodate overlayfs stacked file operations change. The real struct file is hidden behind the overlays struct file. So, any file->f_mode manipulations are not reflected on the real struct file. Open the file again in read mode if original file cannot be read, read and calculate the hash. Signed-off-by: Goldwyn Rodrigues Cc: stable@vger.kernel.org (linux-4.19) Signed-off-by: Mimi Zohar

ima: Get rid of ima_used_chip and use ima_tpm_chip != NULL instead

2018-07-28T14:03:11Z

Get rid of ima_used_chip and use ima_tpm_chip variable instead for determining whether to use the TPM chip. Signed-off-by: Stefan Berger Signed-off-by: Mimi Zohar Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

ima: Use tpm_default_chip() and call TPM functions with a tpm_chip

2018-07-28T14:03:11Z

Rather than accessing the TPM functions by passing a NULL pointer for the tpm_chip, which causes a lookup for a suitable chip every time, get a hold of a tpm_chip and access the TPM functions using it. Signed-off-by: Stefan Berger Signed-off-by: Mimi Zohar Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

ima: Fallback to the builtin hash algorithm

2018-03-25T11:26:32Z

IMA requires having it's hash algorithm be compiled-in due to it's early use. The default IMA algorithm is protected by Kconfig to be compiled-in. The ima_hash kernel parameter allows to choose the hash algorithm. When the specified algorithm is not available or available as a module, IMA initialization fails, which leads to a kernel panic (mknodat syscall calls ima_post_path_mknod()). Therefore as fallback we force IMA to use the default builtin Kconfig hash algorithm. Fixed crash: $ grep CONFIG_CRYPTO_MD4 .config CONFIG_CRYPTO_MD4=m [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-2.3-default root=UUID=74ae8202-9ca7-4e39-813b-22287ec52f7a video=1024x768-16 plymouth.ignore-serial-consoles console=ttyS0 console=tty resume=/dev/disk/by-path/pci-0000:00:07.0-part3 splash=silent showopts ima_hash=md4 ... [ 1.545190] ima: Can not allocate md4 (reason: -2) ... [ 2.610120] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2.611903] IP: ima_match_policy+0x23/0x390 [ 2.612967] PGD 0 P4D 0 [ 2.613080] Oops: 0000 [#1] SMP [ 2.613080] Modules linked in: autofs4 [ 2.613080] Supported: Yes [ 2.613080] CPU: 0 PID: 1 Comm: systemd Not tainted 4.12.14-2.3-default #1 [ 2.613080] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 [ 2.613080] task: ffff88003e2d0040 task.stack: ffffc90000190000 [ 2.613080] RIP: 0010:ima_match_policy+0x23/0x390 [ 2.613080] RSP: 0018:ffffc90000193e88 EFLAGS: 00010296 [ 2.613080] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000004 [ 2.613080] RDX: 0000000000000010 RSI: 0000000000000001 RDI: ffff880037071728 [ 2.613080] RBP: 0000000000008000 R08: 0000000000000000 R09: 0000000000000000 [ 2.613080] R10: 0000000000000008 R11: 61c8864680b583eb R12: 00005580ff10086f [ 2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000008000 [ 2.613080] FS: 00007f5c1da08940(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 2.613080] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.613080] CR2: 0000000000000000 CR3: 0000000037002000 CR4: 00000000003406f0 [ 2.613080] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2.613080] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2.613080] Call Trace: [ 2.613080] ? shmem_mknod+0xbf/0xd0 [ 2.613080] ima_post_path_mknod+0x1c/0x40 [ 2.613080] SyS_mknod+0x210/0x220 [ 2.613080] entry_SYSCALL_64_fastpath+0x1a/0xa5 [ 2.613080] RIP: 0033:0x7f5c1bfde570 [ 2.613080] RSP: 002b:00007ffde1c90dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000085 [ 2.613080] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1bfde570 [ 2.613080] RDX: 0000000000000000 RSI: 0000000000008000 RDI: 00005580ff10086f [ 2.613080] RBP: 00007ffde1c91040 R08: 00005580ff10086f R09: 0000000000000000 [ 2.613080] R10: 0000000000104000 R11: 0000000000000246 R12: 00005580ffb99660 [ 2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000002 [ 2.613080] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 44 8d 14 09 41 55 41 54 55 53 44 89 d3 09 cb 48 83 ec 38 48 8b 05 c5 03 29 01 <4c> 8b 20 4c 39 e0 0f 84 d7 01 00 00 4c 89 44 24 08 89 54 24 20 [ 2.613080] RIP: ima_match_policy+0x23/0x390 RSP: ffffc90000193e88 [ 2.613080] CR2: 0000000000000000 [ 2.613080] ---[ end trace 9a9f0a8a73079f6a ]--- [ 2.673052] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 2.673052] [ 2.675337] Kernel Offset: disabled [ 2.676405] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 Signed-off-by: Petr Vorel Signed-off-by: Mimi Zohar

tpm: use struct tpm_chip for tpm_chip_find_get()

2018-01-08T10:58:36Z

Device number (the character device index) is not a stable identifier for a TPM chip. That is the reason why every call site passes TPM_ANY_NUM to tpm_chip_find_get(). This commit changes the API in a way that instead a struct tpm_chip instance is given and NULL means the default chip. In addition, this commit refines the documentation to be up to date with the implementation. Suggested-by: Jason Gunthorpe (@chip_num -> @chip part) Signed-off-by: Jarkko Sakkinen Reviewed-by: Jason Gunthorpe Tested-by: PrasannaKumar Muralidharan

Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

2017-11-14T18:52:09Z

Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.15: API: - Disambiguate EBUSY when queueing crypto request by adding ENOSPC. This change touches code outside the crypto API. - Reset settings when empty string is written to rng_current. Algorithms: - Add OSCCA SM3 secure hash. Drivers: - Remove old mv_cesa driver (replaced by marvell/cesa). - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx. - Add ccm/gcm AES in crypto4xx. - Add support for BCM7278 in iproc-rng200. - Add hash support on Exynos in s5p-sss. - Fix fallback-induced error in vmx. - Fix output IV in atmel-aes. - Fix empty GCM hash in mediatek. Others: - Fix DoS potential in lib/mpi. - Fix potential out-of-order issues with padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) lib/mpi: call cond_resched() from mpi_powm() loop crypto: stm32/hash - Fix return issue on update crypto: dh - Remove pointless checks for NULL 'p' and 'g' crypto: qat - Clean up error handling in qat_dh_set_secret() crypto: dh - Don't permit 'key' or 'g' size longer than 'p' crypto: dh - Don't permit 'p' to be 0 crypto: dh - Fix double free of ctx->p hwrng: iproc-rng200 - Add support for BCM7278 dt-bindings: rng: Document BCM7278 RNG200 compatible crypto: chcr - Replace _manual_ swap with swap macro crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[] hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume crypto: atmel - remove empty functions crypto: ecdh - remove empty exit() MAINTAINERS: update maintainer for qat crypto: caam - remove unused param of ctx_map_to_sec4_sg() crypto: caam - remove unneeded edesc zeroization crypto: atmel-aes - Reset the controller before each use crypto: atmel-aes - properly set IV after {en,de}crypt hwrng: core - Reset user selected rng by writing "" to rng_current ...

ima: always measure and audit files in policy

2017-11-08T20:16:36Z

All files matching a "measure" rule must be included in the IMA measurement list, even when the file hash cannot be calculated. Similarly, all files matching an "audit" rule must be audited, even when the file hash can not be calculated. The file data hash field contained in the IMA measurement list template data will contain 0's instead of the actual file hash digest. Note: In general, adding, deleting or in anyway changing which files are included in the IMA measurement list is not a good idea, as it might result in not being able to unseal trusted keys sealed to a specific TPM PCR value. This patch not only adds file measurements that were not previously measured, but specifies that the file hash value for these files will be 0's. As the IMA measurement list ordering is not consistent from one boot to the next, it is unlikely that anyone is sealing keys based on the IMA measurement list. Remote attestation servers should be able to process these new measurement records, but might complain about these unknown records. Signed-off-by: Mimi Zohar Reviewed-by: Dmitry Kasatkin

ima: move to generic async completion

2017-11-03T14:11:21Z

ima starts several async crypto ops and waits for their completions. Move it over to generic code doing the same. Signed-off-by: Gilad Ben-Yossef Acked-by: Mimi Zohar Signed-off-by: Herbert Xu