kernel/samples, branch linux-5.14.y

samples/kretprobes: Fix return value if register_kretprobe() failed

2021-11-17T10:04:16Z

[ Upstream commit f76fbbbb5061fe14824ba5807c44bd7400a6b4e1 ] Use the actual return value instead of always -1 if register_kretprobe() failed. E.g. without this patch: # insmod samples/kprobes/kretprobe_example.ko func=no_such_func insmod: ERROR: could not insert module samples/kprobes/kretprobe_example.ko: Operation not permitted With this patch: # insmod samples/kprobes/kretprobe_example.ko func=no_such_func insmod: ERROR: could not insert module samples/kprobes/kretprobe_example.ko: Unknown symbol in module Link: https://lkml.kernel.org/r/1635213091-24387-2-git-send-email-yangtiezhu@loongson.cn Fixes: 804defea1c02 ("Kprobes: move kprobe examples to samples/") Signed-off-by: Tiezhu Yang Acked-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Sasha Levin

samples: pktgen: fix to print when terminated normally

2021-09-18T11:43:56Z

[ Upstream commit c0e9422c4e6ca9abd4bd6e1598400c7231eb600b ] Currently, most pktgen samples print the execution result when the program is terminated normally. However, sample03 doesn't work appropriately. This is results of samples: # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 1 Running... ctrl^C to stop Device: eth0@0 Result: OK: 19(c5+d13) usec, 1 (60byte,0frags) 51762pps 24Mb/sec (24845760bps) errors: 0 # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample03_burst_single_flow.sh -n 1 Running... ctrl^C to stop The reason why it doesn't print the execution result when the program is terminated usually is that sample03 doesn't call the function which prints the result, unlike other samples. So, this commit solves this issue by calling the function before termination. Also, this commit changes control_c function to print_result to maintain consistency with other samples. Signed-off-by: Juhee Kang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

samples: bpf: Fix tracex7 error raised on the missing argument

2021-09-18T11:43:43Z

[ Upstream commit 7d07006f05922b95518be403f08ef8437b67aa32 ] The current behavior of 'tracex7' doesn't consist with other bpf samples tracex{1..6}. Other samples do not require any argument to run with, but tracex7 should be run with btrfs device argument. (it should be executed with test_override_return.sh) Currently, tracex7 doesn't have any description about how to run this program and raises an unexpected error. And this result might be confusing since users might not have a hunch about how to run this program. // Current behavior # ./tracex7 sh: 1: Syntax error: word unexpected (expecting ")") // Fixed behavior # ./tracex7 ERROR: Run with the btrfs device argument! In order to fix this error, this commit adds logic to report a message and exit when running this program with a missing argument. Additionally in test_override_return.sh, there is a problem with multiple directory(tmpmnt) creation. So in this commit adds a line with removing the directory with every execution. Signed-off-by: Juhee Kang Signed-off-by: Andrii Nakryiko Acked-by: Yonghong Song Link: https://lore.kernel.org/bpf/20210727041056.23455-1-claudiajkang@gmail.com Signed-off-by: Sasha Levin

vfio/mbochs: Fix missing error unwind of mbochs_used_mbytes

2021-09-18T11:43:30Z

[ Upstream commit de5494af4815a4c9328536c72741229b7de88e7f ] Convert mbochs to use an atomic scheme for this like mtty was changed into. The atomic fixes various race conditions with probing. Add the missing error unwind. Also add the missing kfree of mdev_state->pages. Fixes: 681c1615f891 ("vfio/mbochs: Convert to use vfio_register_group_dev()") Reported-by: Cornelia Huck Co-developed-by: Alex Williamson Reviewed-by: Christoph Hellwig Signed-off-by: Jason Gunthorpe Reviewed-by: Cornelia Huck Link: https://lore.kernel.org/r/2-v4-9ea22c5e6afb+1adf-vfio_reflck_jgg@nvidia.com Signed-off-by: Alex Williamson Signed-off-by: Sasha Levin

samples: pktgen: add missing IPv6 option to pktgen scripts

2021-09-15T08:02:23Z

[ Upstream commit 0f0c4f1b72e090b23131700bb155944cc28b2a7b ] Currently, "sample04" and "sample05" are not working properly when running with an IPv6 option("-6"). The commit 0f06a6787e05 ("samples: Add an IPv6 "-6" option to the pktgen scripts") has omitted the addition of this option at "sample04" and "sample05". In order to support IPv6 option, this commit adds logic related to IPv6 option. Fixes: 0f06a6787e05 ("samples: Add an IPv6 "-6" option to the pktgen scripts") Signed-off-by: Juhee Kang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

bpf, samples: Add missing mprog-disable to xdp_redirect_cpu's optstring

2021-09-15T08:02:18Z

[ Upstream commit 34ad6d9d8c27293e1895b448af7d6cf5d351ad8d ] Commit ce4dade7f12a ("samples/bpf: xdp_redirect_cpu: Load a eBPF program on cpumap") added the following option, but missed adding it to optstring: - mprog-disable: disable loading XDP program on cpumap entries Fix it and add the missing option character. Fixes: ce4dade7f12a ("samples/bpf: xdp_redirect_cpu: Load a eBPF program on cpumap") Signed-off-by: Matthew Cover Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20210731005632.13228-1-matthew.cover@stackpath.com Signed-off-by: Sasha Levin

Merge tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-07-14T16:24:32Z

Pull networking fixes from Jakub Kicinski. "Including fixes from bpf and netfilter. Current release - regressions: - sock: fix parameter order in sock_setsockopt() Current release - new code bugs: - netfilter: nft_last: - fix incorrect arithmetic when restoring last used - honor NFTA_LAST_SET on restoration Previous releases - regressions: - udp: properly flush normal packet at GRO time - sfc: ensure correct number of XDP queues; don't allow enabling the feature if there isn't sufficient resources to Tx from any CPU - dsa: sja1105: fix address learning getting disabled on the CPU port - mptcp: addresses a rmem accounting issue that could keep packets in subflow receive buffers longer than necessary, delaying MPTCP-level ACKs - ip_tunnel: fix mtu calculation for ETHER tunnel devices - do not reuse skbs allocated from skbuff_fclone_cache in the napi skb cache, we'd try to return them to the wrong slab cache - tcp: consistently disable header prediction for mptcp Previous releases - always broken: - bpf: fix subprog poke descriptor tracking use-after-free - ipv6: - allocate enough headroom in ip6_finish_output2() in case iptables TEE is used - tcp: drop silly ICMPv6 packet too big messages to avoid expensive and pointless lookups (which may serve as a DDOS vector) - make sure fwmark is copied in SYNACK packets - fix 'disable_policy' for forwarded packets (align with IPv4) - netfilter: conntrack: - do not renew entry stuck in tcp SYN_SENT state - do not mark RST in the reply direction coming after SYN packet for an out-of-sync entry - mptcp: cleanly handle error conditions with MP_JOIN and syncookies - mptcp: fix double free when rejecting a join due to port mismatch - validate lwtstate->data before returning from skb_tunnel_info() - tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path - mt76: mt7921: continue to probe driver when fw already downloaded - bonding: fix multiple issues with offloading IPsec to (thru?) bond - stmmac: ptp: fix issues around Qbv support and setting time back - bcmgenet: always clear wake-up based on energy detection Misc: - sctp: move 198 addresses from unusable to private scope - ptp: support virtual clocks and timestamping - openvswitch: optimize operation for key comparison" * tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits) net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave() sfc: add logs explaining XDP_TX/REDIRECT is not available sfc: ensure correct number of XDP queues sfc: fix lack of XDP TX queues - error XDP TX failed (-22) net: fddi: fix UAF in fza_probe net: dsa: sja1105: fix address learning getting disabled on the CPU port net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload net: Use nlmsg_unicast() instead of netlink_unicast() octeontx2-pf: Fix uninitialized boolean variable pps ipv6: allocate enough headroom in ip6_finish_output2() net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific net: bridge: multicast: fix MRD advertisement router port marking race net: bridge: multicast: fix PIM hello router port marking race net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340 dsa: fix for_each_child.cocci warnings virtio_net: check virtqueue_add_sgs() return value mptcp: properly account bulk freed memory selftests: mptcp: fix case multiple subflows limited by server mptcp: avoid processing packet if a subflow reset mptcp: fix syncookie process if mptcp can not_accept new subflow ...

bpf, samples: Fix xdpsock with '-M' parameter missing unload process

2021-07-05T21:34:18Z

Execute the following command and exit, then execute it again, the following error will be reported: $ sudo ./samples/bpf/xdpsock -i ens4f2 -M ^C $ sudo ./samples/bpf/xdpsock -i ens4f2 -M libbpf: elf: skipping unrecognized data section(16) .eh_frame libbpf: elf: skipping relo section(17) .rel.eh_frame for section(16) .eh_frame libbpf: Kernel error message: XDP program already attached ERROR: link set xdp fd failed Commit c9d27c9e8dc7 ("samples: bpf: Do not unload prog within xdpsock") removed the unloading prog code because of the presence of bpf_link. This is fine if XDP_SHARED_UMEM is disabled, but if it is enabled, unloading the prog is still needed. Fixes: c9d27c9e8dc7 ("samples: bpf: Do not unload prog within xdpsock") Signed-off-by: Wang Hai Signed-off-by: Daniel Borkmann Acked-by: Magnus Karlsson Cc: Maciej Fijalkowski Link: https://lore.kernel.org/bpf/20210628091815.2373487-1-wanghai38@huawei.com

bpf, samples: Add -fno-asynchronous-unwind-tables to BPF Clang invocation

2021-07-05T19:56:30Z

The samples/bpf Makefile currently compiles BPF files in a way that will produce an .eh_frame section, which will in turn confuse libbpf and produce errors when loading BPF programs, like: libbpf: elf: skipping unrecognized data section(32) .eh_frame libbpf: elf: skipping relo section(33) .rel.eh_frame for section(32) .eh_frame Fix this by instruction Clang not to produce this section, as it's useless for BPF anyway. Suggested-by: Daniel Borkmann Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20210705103841.180260-1-toke@redhat.com

Merge tag 'vfio-v5.14-rc1' of git://github.com/awilliam/linux-vfio

2021-07-03T18:49:33Z

Pull VFIO updates from Alex Williamson: - Module reference fixes, structure renaming (Max Gurtovoy) - Export and use common pci_dev_trylock() (Luis Chamberlain) - Enable direct mdev device creation and probing by parent (Christoph Hellwig & Jason Gunthorpe) - Fix mdpy error path leak (Colin Ian King) - Fix mtty list entry leak (Jason Gunthorpe) - Enforce mtty device limit (Alex Williamson) - Resolve concurrent vfio-pci mmap faults (Alex Williamson) * tag 'vfio-v5.14-rc1' of git://github.com/awilliam/linux-vfio: vfio/pci: Handle concurrent vma faults vfio/mtty: Enforce available_instances vfio/mtty: Delete mdev_devices_list vfio: use the new pci_dev_trylock() helper to simplify try lock PCI: Export pci_dev_trylock() and pci_dev_unlock() vfio/mdpy: Fix memory leak of object mdev_state->vconfig vfio/iommu_type1: rename vfio_group struck to vfio_iommu_group vfio/mbochs: Convert to use vfio_register_group_dev() vfio/mdpy: Convert to use vfio_register_group_dev() vfio/mtty: Convert to use vfio_register_group_dev() vfio/mdev: Allow the mdev_parent_ops to specify the device driver to bind vfio/mdev: Remove CONFIG_VFIO_MDEV_DEVICE driver core: Export device_driver_attach() driver core: Don't return EPROBE_DEFER to userspace during sysfs bind driver core: Flow the return code from ->probe() through to sysfs bind driver core: Better distinguish probe errors in really_probe driver core: Pull required checks into driver_probe_device() vfio/platform: remove unneeded parent_module attribute vfio: centralize module refcount in subsystem layer