kernel/net, branch linux-6.12.y

net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks

2026-03-13T16:20:47Z

commit 11cb63b0d1a0685e0831ae3c77223e002ef18189 upstream. As Paolo said earlier [1]: "Since the blamed commit below, classify can return TC_ACT_CONSUMED while the current skb being held by the defragmentation engine. As reported by GangMin Kim, if such packet is that may cause a UaF when the defrag engine later on tries to tuch again such packet." act_ct was never meant to be used in the egress path, however some users are attaching it to egress today [2]. Attempting to reach a middle ground, we noticed that, while most qdiscs are not handling TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we address the issue by only allowing act_ct to bind to clsact/ingress qdiscs and shared blocks. That way it's still possible to attach act_ct to egress (albeit only with clsact). [1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/ [2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/ Reported-by: GangMin Kim Fixes: 3f14b377d01d ("net/sched: act_ct: fix skb leak and crash on ooo frags") CC: stable@vger.kernel.org Signed-off-by: Victor Nogueira Acked-by: Jamal Hadi Salim Link: https://patch.msgid.link/20260225134349.1287037-1-victor@mojatatu.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

xdp: produce a warning when calculated tailroom is negative

2026-03-13T16:20:47Z

[ Upstream commit 8821e857759be9db3cde337ad328b71fe5c8a55f ] Many ethernet drivers report xdp Rx queue frag size as being the same as DMA write size. However, the only user of this field, namely bpf_xdp_frags_increase_tail(), clearly expects a truesize. Such difference leads to unspecific memory corruption issues under certain circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses all DMA-writable space in 2 buffers. This would be fine, if only rxq->frag_size was properly set to 4K, but value of 3K results in a negative tailroom, because there is a non-zero page offset. We are supposed to return -EINVAL and be done with it in such case, but due to tailroom being stored as an unsigned int, it is reported to be somewhere near UINT_MAX, resulting in a tail being grown, even if the requested offset is too much (it is around 2K in the abovementioned test). This later leads to all kinds of unspecific calltraces. [ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6 [ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4 [ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000] [ 7340.339230] in xskxceiver[42b5,400000+69000] [ 7340.340300] likely on CPU 6 (core 0, socket 6) [ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe [ 7340.340888] likely on CPU 3 (core 0, socket 3) [ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7 [ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI [ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy) [ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014 [ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80 [ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89 [ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202 [ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010 [ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff [ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0 [ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0 [ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500 [ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000 [ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0 [ 7340.421237] PKRU: 55555554 [ 7340.421623] Call Trace: [ 7340.421987] [ 7340.422309] ? softleaf_from_pte+0x77/0xa0 [ 7340.422855] swap_pte_batch+0xa7/0x290 [ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270 [ 7340.424102] zap_pte_range+0x281/0x580 [ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240 [ 7340.425177] unmap_page_range+0x24d/0x420 [ 7340.425714] unmap_vmas+0xa1/0x180 [ 7340.426185] exit_mmap+0xe1/0x3b0 [ 7340.426644] __mmput+0x41/0x150 [ 7340.427098] exit_mm+0xb1/0x110 [ 7340.427539] do_exit+0x1b2/0x460 [ 7340.427992] do_group_exit+0x2d/0xc0 [ 7340.428477] get_signal+0x79d/0x7e0 [ 7340.428957] arch_do_signal_or_restart+0x34/0x100 [ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0 [ 7340.430159] do_syscall_64+0x188/0x6b0 [ 7340.430672] ? __do_sys_clone3+0xd9/0x120 [ 7340.431212] ? switch_fpu_return+0x4e/0xd0 [ 7340.431761] ? arch_exit_to_user_mode_prepare.isra.0+0xa1/0xc0 [ 7340.432498] ? do_syscall_64+0xbb/0x6b0 [ 7340.433015] ? __handle_mm_fault+0x445/0x690 [ 7340.433582] ? count_memcg_events+0xd6/0x210 [ 7340.434151] ? handle_mm_fault+0x212/0x340 [ 7340.434697] ? do_user_addr_fault+0x2b4/0x7b0 [ 7340.435271] ? clear_bhb_loop+0x30/0x80 [ 7340.435788] ? clear_bhb_loop+0x30/0x80 [ 7340.436299] ? clear_bhb_loop+0x30/0x80 [ 7340.436812] ? clear_bhb_loop+0x30/0x80 [ 7340.437323] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 7340.437973] RIP: 0033:0x7f4161b14169 [ 7340.438468] Code: Unable to access opcode bytes at 0x7f4161b1413f. [ 7340.439242] RSP: 002b:00007ffc6ebfa770 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca [ 7340.440173] RAX: fffffffffffffe00 RBX: 00000000000005a1 RCX: 00007f4161b14169 [ 7340.441061] RDX: 00000000000005a1 RSI: 0000000000000109 RDI: 00007f415bfff990 [ 7340.441943] RBP: 00007ffc6ebfa7a0 R08: 0000000000000000 R09: 00000000ffffffff [ 7340.442824] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 7340.443707] R13: 0000000000000000 R14: 00007f415bfff990 R15: 00007f415bfff6c0 [ 7340.444586] [ 7340.444922] Modules linked in: rfkill intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit libnvdimm kvm_intel vfat fat kvm snd_pcm irqbypass rapl iTCO_wdt snd_timer intel_pmc_bxt iTCO_vendor_support snd ixgbevf virtio_net soundcore i2c_i801 pcspkr libeth_xdp net_failover i2c_smbus lpc_ich failover libeth virtio_balloon joydev 9p fuse loop zram lz4hc_compress lz4_compress 9pnet_virtio 9pnet netfs ghash_clmulni_intel serio_raw qemu_fw_cfg [ 7340.449650] ---[ end trace 0000000000000000 ]--- The issue can be fixed in all in-tree drivers, but we cannot just trust OOT drivers to not do this. Therefore, make tailroom a signed int and produce a warning when it is negative to prevent such mistakes in the future. Fixes: bf25146a5595 ("bpf: add frags support to the bpf_xdp_adjust_tail() API") Reviewed-by: Aleksandr Loktionov Reviewed-by: Toke Høiland-Jørgensen Acked-by: Martin KaFai Lau Signed-off-by: Larysa Zaremba Link: https://patch.msgid.link/20260305111253.2317394-10-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

xdp: use modulo operation to calculate XDP frag tailroom

2026-03-13T16:20:46Z

[ Upstream commit 88b6b7f7b216108a09887b074395fa7b751880b1 ] The current formula for calculating XDP tailroom in mbuf packets works only if each frag has its own page (if rxq->frag_size is PAGE_SIZE), this defeats the purpose of the parameter overall and without any indication leads to negative calculated tailroom on at least half of frags, if shared pages are used. There are not many drivers that set rxq->frag_size. Among them: * i40e and enetc always split page uniformly between frags, use shared pages * ice uses page_pool frags via libeth, those are power-of-2 and uniformly distributed across page * idpf has variable frag_size with XDP on, so current API is not applicable * mlx5, mtk and mvneta use PAGE_SIZE or 0 as frag_size for page_pool As for AF_XDP ZC, only ice, i40e and idpf declare frag_size for it. Modulo operation yields good results for aligned chunks, they are all power-of-2, between 2K and PAGE_SIZE. Formula without modulo fails when chunk_size is 2K. Buffers in unaligned mode are not distributed uniformly, so modulo operation would not work. To accommodate unaligned buffers, we could define frag_size as data + tailroom, and hence do not subtract offset when calculating tailroom, but this would necessitate more changes in the drivers. Define rxq->frag_size as an even portion of a page that fully belongs to a single frag. When calculating tailroom, locate the data start within such portion by performing a modulo operation on page offset. Fixes: bf25146a5595 ("bpf: add frags support to the bpf_xdp_adjust_tail() API") Acked-by: Jakub Kicinski Reviewed-by: Aleksandr Loktionov Signed-off-by: Larysa Zaremba Link: https://patch.msgid.link/20260305111253.2317394-2-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net/sched: act_ife: Fix metalist update behavior

2026-03-13T16:20:46Z

[ Upstream commit e2cedd400c3ec0302ffca2490e8751772906ac23 ] Whenever an ife action replace changes the metalist, instead of replacing the old data on the metalist, the current ife code is appending the new metadata. Aside from being innapropriate behavior, this may lead to an unbounded addition of metadata to the metalist which might cause an out of bounds error when running the encode op: [ 138.423369][ C1] ================================================================== [ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255 [ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full) [ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 138.425800][ C1] Call Trace: [ 138.425804][ C1] [ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122) [ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) [ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1)) [ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597) [ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1)) [ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2)) [ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168) [ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171) [ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57) [ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114) [ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3)) [ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45) [ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221) [ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879) To solve this issue, fix the replace behavior by adding the metalist to the ife rcu data structure. Fixes: aa9fd9a325d51 ("sched: act: ife: update parameters via rcu handling") Reported-by: Ruitong Liu Tested-by: Ruitong Liu Co-developed-by: Victor Nogueira Signed-off-by: Victor Nogueira Signed-off-by: Jamal Hadi Salim Link: https://patch.msgid.link/20260304140603.76500-1-jhs@mojatatu.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop

2026-03-13T16:20:46Z

[ Upstream commit 21ec92774d1536f71bdc90b0e3d052eff99cf093 ] When a standalone IPv6 nexthop object is created with a loopback device (e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies it as a reject route. This is because nexthop objects have no destination prefix (fc_dst=::), causing fib6_is_reject() to match any loopback nexthop. The reject path skips fib_nh_common_init(), leaving nhc_pcpu_rth_output unallocated. If an IPv4 route later references this nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and panics. Simplify the check in fib6_nh_init() to only match explicit reject routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback promotion heuristic in fib6_is_reject() is handled separately by ip6_route_info_create_nh(). After this change, the three cases behave as follows: 1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"): RTF_REJECT is set, enters reject path, skips fib_nh_common_init(). No behavior change. 2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. ip6_route_info_create_nh() still promotes it to reject afterward. nhc_pcpu_rth_output is allocated but unused, which is harmless. 3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. nhc_pcpu_rth_output is properly allocated, fixing the crash when IPv4 routes reference this nexthop. Suggested-by: Ido Schimmel Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects") Reported-by: syzbot+334190e097a98a1b81bb@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/698f8482.a70a0220.2c38d7.00ca.GAE@google.com/T/ Signed-off-by: Jiayuan Chen Reviewed-by: Ido Schimmel Reviewed-by: David Ahern Link: https://patch.msgid.link/20260304113817.294966-2-jiayuan.chen@linux.dev Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled

2026-03-13T16:20:45Z

[ Upstream commit e5e890630533bdc15b26a34bb8e7ef539bdf1322 ] When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. Then, if neigh_suppress is enabled and an ICMPv6 Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will dereference ipv6_stub->nd_tbl which is NULL, passing it to neigh_lookup(). This causes a kernel NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000268 Oops: 0000 [#1] PREEMPT SMP NOPTI [...] RIP: 0010:neigh_lookup+0x16/0xe0 [...] Call Trace: ? neigh_lookup+0x16/0xe0 br_do_suppress_nd+0x160/0x290 [bridge] br_handle_frame_finish+0x500/0x620 [bridge] br_handle_frame+0x353/0x440 [bridge] __netif_receive_skb_core.constprop.0+0x298/0x1110 __netif_receive_skb_one_core+0x3d/0xa0 process_backlog+0xa0/0x140 __napi_poll+0x2c/0x170 net_rx_action+0x2c4/0x3a0 handle_softirqs+0xd0/0x270 do_softirq+0x3f/0x60 Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in the callers. This is in essence disabling NS/NA suppression when IPv6 is disabled. Fixes: ed842faeb2bd ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports") Reported-by: Guruprasad C P Closes: https://lore.kernel.org/netdev/CAHXs0ORzd62QOG-Fttqa2Cx_A_VFp=utE2H2VTX5nqfgs7LDxQ@mail.gmail.com/ Signed-off-by: Fernando Fernandez Mancera Reviewed-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/20260304120357.9778-1-fmancera@suse.de Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

netfilter: nft_set_pipapo: split gc into unlink and reclaim phase

2026-03-13T16:20:45Z

[ Upstream commit 9df95785d3d8302f7c066050117b04cd3c2048c2 ] Yiming Qian reports Use-after-free in the pipapo set type: Under a large number of expired elements, commit-time GC can run for a very long time in a non-preemptible context, triggering soft lockup warnings and RCU stall reports (local denial of service). We must split GC in an unlink and a reclaim phase. We cannot queue elements for freeing until pointers have been swapped. Expired elements are still exposed to both the packet path and userspace dumpers via the live copy of the data structure. call_rcu() does not protect us: dump operations or element lookups starting after call_rcu has fired can still observe the free'd element, unless the commit phase has made enough progress to swap the clone and live pointers before any new reader has picked up the old version. This a similar approach as done recently for the rbtree backend in commit 35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert"). Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Reported-by: Yiming Qian Signed-off-by: Florian Westphal Signed-off-by: Sasha Levin

nfc: rawsock: cancel tx_work before socket teardown

2026-03-13T16:20:45Z

[ Upstream commit d793458c45df2aed498d7f74145eab7ee22d25aa ] In rawsock_release(), cancel any pending tx_work and purge the write queue before orphaning the socket. rawsock_tx_work runs on the system workqueue and calls nfc_data_exchange which dereferences the NCI device. Without synchronization, tx_work can race with socket and device teardown when a process is killed (e.g. by SIGKILL), leading to use-after-free or leaked references. Set SEND_SHUTDOWN first so that if tx_work is already running it will see the flag and skip transmitting, then use cancel_work_sync to wait for any in-progress execution to finish, and finally purge any remaining queued skbs. Fixes: 23b7869c0fd0 ("NFC: add the NFC socket raw protocol") Reviewed-by: Joe Damato Link: https://patch.msgid.link/20260303162346.2071888-6-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

nfc: nci: clear NCI_DATA_EXCHANGE before calling completion callback

2026-03-13T16:20:45Z

[ Upstream commit 0efdc02f4f6d52f8ca5d5889560f325a836ce0a8 ] Move clear_bit(NCI_DATA_EXCHANGE) before invoking the data exchange callback in nci_data_exchange_complete(). The callback (e.g. rawsock_data_exchange_complete) may immediately schedule another data exchange via schedule_work(tx_work). On a multi-CPU system, tx_work can run and reach nci_transceive() before the current nci_data_exchange_complete() clears the flag, causing test_and_set_bit(NCI_DATA_EXCHANGE) to return -EBUSY and the new transfer to fail. This causes intermittent flakes in nci/nci_dev in NIPA: # # RUN NCI.NCI1_0.t4t_tag_read ... # # t4t_tag_read: Test terminated by timeout # # FAIL NCI.NCI1_0.t4t_tag_read # not ok 3 NCI.NCI1_0.t4t_tag_read Fixes: 38f04c6b1b68 ("NFC: protect nci_data_exchange transactions") Reviewed-by: Joe Damato Link: https://patch.msgid.link/20260303162346.2071888-5-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

nfc: nci: free skb on nci_transceive early error paths

2026-03-13T16:20:44Z

[ Upstream commit 7bd4b0c4779f978a6528c9b7937d2ca18e936e2c ] nci_transceive() takes ownership of the skb passed by the caller, but the -EPROTO, -EINVAL, and -EBUSY error paths return without freeing it. Due to issues clearing NCI_DATA_EXCHANGE fixed by subsequent changes the nci/nci_dev selftest hits the error path occasionally in NIPA, and kmemleak detects leaks: unreferenced object 0xff11000015ce6a40 (size 640): comm "nci_dev", pid 3954, jiffies 4295441246 hex dump (first 32 bytes): 6b 6b 6b 6b 00 a4 00 0c 02 e1 03 6b 6b 6b 6b 6b kkkk.......kkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace (crc 7c40cc2a): kmem_cache_alloc_node_noprof+0x492/0x630 __alloc_skb+0x11e/0x5f0 alloc_skb_with_frags+0xc6/0x8f0 sock_alloc_send_pskb+0x326/0x3f0 nfc_alloc_send_skb+0x94/0x1d0 rawsock_sendmsg+0x162/0x4c0 do_syscall_64+0x117/0xfc0 Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation") Reviewed-by: Joe Damato Link: https://patch.msgid.link/20260303162346.2071888-2-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin