kernel/net, branch linux-5.7.y

ethtool: Don't omit the netlink reply if no features were changed

2020-08-27T07:30:50Z

[ Upstream commit f01204ec8be7ea5e8f0230a7d4200e338d563bde ] The legacy ethtool userspace tool shows an error when no features could be changed. It's useful to have a netlink reply to be able to show this error when __netdev_update_features wasn't called, for example: 1. ethtool -k eth0 large-receive-offload: off 2. ethtool -K eth0 rx-fcs on 3. ethtool -K eth0 lro on Could not change any device features rx-lro: off [requested on] 4. ethtool -K eth0 lro on # The output should be the same, but without this patch the kernel # doesn't send the reply, and ethtool is unable to detect the error. This commit makes ethtool-netlink always return a reply when requested, and it still avoids unnecessary calls to __netdev_update_features if the wanted features haven't changed. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy Reviewed-by: Michal Kubecek Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ethtool: Account for hw_features in netlink interface

2020-08-27T07:30:49Z

[ Upstream commit 2847bfed888fbb8bf4c8e8067fd6127538c2c700 ] ethtool-netlink ignores dev->hw_features and may confuse the drivers by asking them to enable features not in the hw_features bitmask. For example: 1. ethtool -k eth0 tls-hw-tx-offload: off [fixed] 2. ethtool -K eth0 tls-hw-tx-offload on tls-hw-tx-offload: on 3. ethtool -k eth0 tls-hw-tx-offload: on [fixed] Fitler out dev->hw_features from req_wanted to fix it and to resemble the legacy ethtool behavior. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy Reviewed-by: Michal Kubecek Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ethtool: Fix preserving of wanted feature bits in netlink interface

2020-08-27T07:30:49Z

[ Upstream commit 840110a4eae190dcbb9907d68216d5d1d9f25839 ] Currently, ethtool-netlink calculates new wanted bits as: (req_wanted & req_mask) | (old_active & ~req_mask) It completely discards the old wanted bits, so they are forgotten with the next ethtool command. Sample steps to reproduce: 1. ethtool -k eth0 tx-tcp-segmentation: on # TSO is on from the beginning 2. ethtool -K eth0 tx off tx-tcp-segmentation: off [not requested] 3. ethtool -k eth0 tx-tcp-segmentation: off [requested on] 4. ethtool -K eth0 rx off # Some change unrelated to TSO 5. ethtool -k eth0 tx-tcp-segmentation: off # "Wanted on" is forgotten This commit fixes it by changing the formula to: (req_wanted & req_mask) | (old_wanted & ~req_mask), where old_active was replaced by old_wanted to account for the wanted bits. The shortcut condition for the case where nothing was changed now compares wanted bitmasks, instead of wanted to active. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Maxim Mikityanskiy Reviewed-by: Michal Kubecek Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tipc: fix uninit skb->data in tipc_nl_compat_dumpit()

2020-08-27T07:30:49Z

[ Upstream commit 47733f9daf4fe4f7e0eb9e273f21ad3a19130487 ] __tipc_nl_compat_dumpit() has two callers, and it expects them to pass a valid nlmsghdr via arg->data. This header is artificial and crafted just for __tipc_nl_compat_dumpit(). tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well as some nested attribute, TIPC_NLA_SOCK. But the other caller tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized on this call path. Fix this by just adding a similar nlmsghdr without any payload in tipc_nl_compat_dumpit(). This bug exists since day 1, but the recent commit 6ea67769ff33 ("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it easier to appear. Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com Fixes: d0796d1ef63d ("tipc: convert legacy nl bearer dump to nl compat") Cc: Jon Maloy Cc: Ying Xue Cc: Richard Alpe Signed-off-by: Cong Wang Acked-by: Ying Xue Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tipc: call rcu_read_lock() in tipc_aead_encrypt_done()

2020-08-27T07:30:49Z

[ Upstream commit f6db9096416209474090d64d8284e7c16c3d8873 ] b->media->send_msg() requires rcu_read_lock(), as we can see elsewhere in tipc, tipc_bearer_xmit, tipc_bearer_xmit_skb and tipc_bearer_bc_xmit(). Syzbot has reported this issue as: net/tipc/bearer.c:466 suspicious rcu_dereference_check() usage! Workqueue: cryptd cryptd_queue_worker Call Trace: tipc_l2_send_msg+0x354/0x420 net/tipc/bearer.c:466 tipc_aead_encrypt_done+0x204/0x3a0 net/tipc/crypto.c:761 cryptd_aead_crypt+0xe8/0x1d0 crypto/cryptd.c:739 cryptd_queue_worker+0x118/0x1b0 crypto/cryptd.c:181 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:291 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293 So fix it by calling rcu_read_lock() in tipc_aead_encrypt_done() for b->media->send_msg(). Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication") Reported-by: syzbot+47bbc6b678d317cccbe0@syzkaller.appspotmail.com Signed-off-by: Xin Long Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/smc: Prevent kernel-infoleak in __smc_diag_dump()

2020-08-27T07:30:49Z

[ Upstream commit ce51f63e63c52a4e1eee4dd040fb0ba0af3b43ab ] __smc_diag_dump() is potentially copying uninitialized kernel stack memory into socket buffers, since the compiler may leave a 4-byte hole near the beginning of `struct smcd_diag_dmbinfo`. Fix it by initializing `dinfo` with memset(). Fixes: 4b1b7d3b30a6 ("net/smc: add SMC-D diag support") Suggested-by: Dan Carpenter Signed-off-by: Peilin Ye Signed-off-by: Ursula Braun Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: sctp: Fix negotiation of the number of data streams.

2020-08-27T07:30:48Z

[ Upstream commit ab921f3cdbec01c68705a7ade8bec628d541fc2b ] The number of output and input streams was never being reduced, eg when processing received INIT or INIT_ACK chunks. The effect is that DATA chunks can be sent with invalid stream ids and then discarded by the remote system. Fixes: 2075e50caf5ea ("sctp: convert to genradix") Signed-off-by: David Laight Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/sched: act_ct: Fix skb double-free in tcf_ct_handle_fragments() error flow

2020-08-27T07:30:48Z

[ Upstream commit eda814b97dfb8d9f4808eb2f65af9bd3705c4cae ] tcf_ct_handle_fragments() shouldn't free the skb when ip_defrag() call fails. Otherwise, we will cause a double-free bug. In such cases, just return the error to the caller. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Alaa Hleihel Reviewed-by: Roi Dayan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: qrtr: fix usage of idr in port assignment to socket

2020-08-27T07:30:48Z

[ Upstream commit 8dfddfb79653df7c38a9c8c4c034f242a36acee9 ] Passing large uint32 sockaddr_qrtr.port numbers for port allocation triggers a warning within idr_alloc() since the port number is cast to int, and thus interpreted as a negative number. This leads to the rejection of such valid port numbers in qrtr_port_assign() as idr_alloc() fails. To avoid the problem, switch to idr_alloc_u32() instead. Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Reported-by: syzbot+f31428628ef672716ea8@syzkaller.appspotmail.com Signed-off-by: Necip Fazil Yildiran Reviewed-by: Dmitry Vyukov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: nexthop: don't allow empty NHA_GROUP

2020-08-27T07:30:48Z

[ Upstream commit eeaac3634ee0e3f35548be35275efeca888e9b23 ] Currently the nexthop code will use an empty NHA_GROUP attribute, but it requires at least 1 entry in order to function properly. Otherwise we end up derefencing null or random pointers all over the place due to not having any nh_grp_entry members allocated, nexthop code relies on having at least the first member present. Empty NHA_GROUP doesn't make any sense so just disallow it. Also add a WARN_ON for any future users of nexthop_create_group(). BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 0 PID: 558 Comm: ip Not tainted 5.9.0-rc1+ #93 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:fib_check_nexthop+0x4a/0xaa Code: 0f 84 83 00 00 00 48 c7 02 80 03 f7 81 c3 40 80 fe fe 75 12 b8 ea ff ff ff 48 85 d2 74 6b 48 c7 02 40 03 f7 81 c3 48 8b 40 10 <48> 8b 80 80 00 00 00 eb 36 80 78 1a 00 74 12 b8 ea ff ff ff 48 85 RSP: 0018:ffff88807983ba00 EFLAGS: 00010213 RAX: 0000000000000000 RBX: ffff88807983bc00 RCX: 0000000000000000 RDX: ffff88807983bc00 RSI: 0000000000000000 RDI: ffff88807bdd0a80 RBP: ffff88807983baf8 R08: 0000000000000dc0 R09: 000000000000040a R10: 0000000000000000 R11: ffff88807bdd0ae8 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88807bea3100 R15: 0000000000000001 FS: 00007f10db393700(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 000000007bd0f004 CR4: 00000000003706f0 Call Trace: fib_create_info+0x64d/0xaf7 fib_table_insert+0xf6/0x581 ? __vma_adjust+0x3b6/0x4d4 inet_rtm_newroute+0x56/0x70 rtnetlink_rcv_msg+0x1e3/0x20d ? rtnl_calcit.isra.0+0xb8/0xb8 netlink_rcv_skb+0x5b/0xac netlink_unicast+0xfa/0x17b netlink_sendmsg+0x334/0x353 sock_sendmsg_nosec+0xf/0x3f ____sys_sendmsg+0x1a0/0x1fc ? copy_msghdr_from_user+0x4c/0x61 ___sys_sendmsg+0x63/0x84 ? handle_mm_fault+0xa39/0x11b5 ? sockfd_lookup_light+0x72/0x9a __sys_sendmsg+0x50/0x6e do_syscall_64+0x54/0xbe entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f10dacc0bb7 Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb cd 66 0f 1f 44 00 00 8b 05 9a 4b 2b 00 85 c0 75 2e 48 63 ff 48 63 d2 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 b1 f2 2a 00 f7 d8 64 89 02 48 RSP: 002b:00007ffcbe628bf8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffcbe628f80 RCX: 00007f10dacc0bb7 RDX: 0000000000000000 RSI: 00007ffcbe628c60 RDI: 0000000000000003 RBP: 000000005f41099c R08: 0000000000000001 R09: 0000000000000008 R10: 00000000000005e9 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007ffcbe628d70 R15: 0000563a86c6e440 Modules linked in: CR2: 0000000000000080 CC: David Ahern Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Reported-by: syzbot+a61aa19b0c14c8770bd9@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman