kernel/net, branch linux-5.2.y

NFC: fix attrs checks in netlink interface

2019-10-07T16:59:40Z

commit 18917d51472fe3b126a3a8f756c6b18085eb8130 upstream. nfc_genl_deactivate_target() relies on the NFC_ATTR_TARGET_INDEX attribute being present, but doesn't check whether it is actually provided by the user. Same goes for nfc_genl_fw_download() and NFC_ATTR_FIRMWARE_NAME. This patch adds appropriate checks. Found with syzkaller. Signed-off-by: Andrey Konovalov Signed-off-by: Andy Shevchenko Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: sched: taprio: Avoid division by zero on invalid link speed

2019-10-07T16:58:28Z

[ Upstream commit 9a9251a3534745d08a92abfeca0ca467b912b5f6 ] The check in taprio_set_picos_per_byte is currently not robust enough and will trigger this division by zero, due to e.g. PHYLINK not setting kset->base.speed when there is no PHY connected: [ 27.109992] Division by zero in kernel. [ 27.113842] CPU: 1 PID: 198 Comm: tc Not tainted 5.3.0-rc5-01246-gc4006b8c2637-dirty #212 [ 27.121974] Hardware name: Freescale LS1021A [ 27.126234] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 27.133938] [] (show_stack) from [] (dump_stack+0xb0/0xc4) [ 27.141124] [] (dump_stack) from [] (Ldiv0_64+0x8/0x18) [ 27.148052] [] (Ldiv0_64) from [] (div64_u64+0xcc/0xf0) [ 27.154978] [] (div64_u64) from [] (div64_s64+0x4c/0x68) [ 27.161993] [] (div64_s64) from [] (taprio_set_picos_per_byte+0xe8/0xf4) [ 27.170388] [] (taprio_set_picos_per_byte) from [] (taprio_change+0x668/0xcec) [ 27.179302] [] (taprio_change) from [] (qdisc_create+0x1fc/0x4f4) [ 27.187091] [] (qdisc_create) from [] (tc_modify_qdisc+0x1ac/0x6f8) [ 27.195055] [] (tc_modify_qdisc) from [] (rtnetlink_rcv_msg+0x268/0x2dc) [ 27.203449] [] (rtnetlink_rcv_msg) from [] (netlink_rcv_skb+0xe0/0x114) [ 27.211756] [] (netlink_rcv_skb) from [] (netlink_unicast+0x1b4/0x22c) [ 27.219977] [] (netlink_unicast) from [] (netlink_sendmsg+0x284/0x340) [ 27.228198] [] (netlink_sendmsg) from [] (sock_sendmsg+0x14/0x24) [ 27.235988] [] (sock_sendmsg) from [] (___sys_sendmsg+0x214/0x228) [ 27.243863] [] (___sys_sendmsg) from [] (__sys_sendmsg+0x50/0x8c) [ 27.251652] [] (__sys_sendmsg) from [] (ret_fast_syscall+0x0/0x54) [ 27.259524] Exception stack(0xe8045fa8 to 0xe8045ff0) [ 27.264546] 5fa0: b6f608c8 000000f8 00000003 bed7e2f0 00000000 00000000 [ 27.272681] 5fc0: b6f608c8 000000f8 004ce54c 00000128 5d3ce8c7 00000000 00000026 00505c9c [ 27.280812] 5fe0: 00000070 bed7e298 004ddd64 b6dd1e64 Russell King points out that the ethtool API says zero is a valid return value of __ethtool_get_link_ksettings: * If it is enabled then they are read-only; if the link * is up they represent the negotiated link mode; if the link is down, * the speed is 0, %SPEED_UNKNOWN or the highest enabled speed and * @duplex is %DUPLEX_UNKNOWN or the best enabled duplex mode. So, it seems that taprio is not following the API... I'd suggest either fixing taprio, or getting agreement to change the ethtool API. The chosen path was to fix taprio. Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation") Signed-off-by: Vladimir Oltean Acked-by: Vinicius Costa Gomes Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: sched: cbs: Avoid division by zero when calculating the port rate

2019-10-07T16:58:27Z

[ Upstream commit 83c8c3cf45163f0c823db37be6ab04dfcf8ac751 ] As explained in the "net: sched: taprio: Avoid division by zero on invalid link speed" commit, it is legal for the ethtool API to return zero as a link speed. So guard against it to ensure we don't perform a division by zero in kernel. Fixes: e0a7683d30e9 ("net/sched: cbs: fix port_rate miscalculation") Signed-off-by: Vladimir Oltean Acked-by: Vinicius Costa Gomes Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/rds: Fix error handling in rds_ib_add_one()

2019-10-07T16:58:25Z

[ Upstream commit d64bf89a75b65f83f06be9fb8f978e60d53752db ] rds_ibdev:ipaddr_list and rds_ibdev:conn_list are initialized after allocation some resources such as protection domain. If allocation of such resources fail, then these uninitialized variables are accessed in rds_ib_dev_free() in failure path. This can potentially crash the system. The code has been updated to initialize these variables very early in the function. Signed-off-by: Dotan Barak Signed-off-by: Sudhakar Dindukurti Acked-by: Santosh Shilimkar Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

udp: only do GSO if # of segs > 1

2019-10-07T16:58:24Z

[ Upstream commit 4094871db1d65810acab3d57f6089aa39ef7f648 ] Prior to this change an application sending <= 1MSS worth of data and enabling UDP GSO would fail if the system had SW GSO enabled, but the same send would succeed if HW GSO offload is enabled. In addition to this inconsistency the error in the SW GSO case does not get back to the application if sending out of a real device so the user is unaware of this failure. With this change we only perform GSO if the # of segments is > 1 even if the application has enabled segmentation. I've also updated the relevant udpgso selftests. Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT") Signed-off-by: Josh Hunt Reviewed-by: Willem de Bruijn Reviewed-by: Alexander Duyck Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tcp: adjust rto_base in retransmits_timed_out()

2019-10-07T16:58:24Z

[ Upstream commit 3256a2d6ab1f71f9a1bd2d7f6f18eb8108c48d17 ] The cited commit exposed an old retransmits_timed_out() bug which assumed it could call tcp_model_timeout() with TCP_RTO_MIN as rto_base for all states. But flows in SYN_SENT or SYN_RECV state uses a different RTO base (1 sec instead of 200 ms, unless BPF choses another value) This caused a reduction of SYN retransmits from 6 to 4 with the default /proc/sys/net/ipv4/tcp_syn_retries value. Fixes: a41e8a88b06e ("tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state") Signed-off-by: Eric Dumazet Cc: Yuchung Cheng Cc: Marek Majkowski Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vsock: Fix a lockdep warning in __vsock_release()

2019-10-07T16:58:23Z

[ Upstream commit 0d9138ffac24cf8b75366ede3a68c951e6dcc575 ] Lockdep is unhappy if two locks from the same class are held. Fix the below warning for hyperv and virtio sockets (vmci socket code doesn't have the issue) by using lock_sock_nested() when __vsock_release() is called recursively: ============================================ WARNING: possible recursive locking detected 5.3.0+ #1 Not tainted -------------------------------------------- server/1795 is trying to acquire lock: ffff8880c5158990 (sk_lock-AF_VSOCK){+.+.}, at: hvs_release+0x10/0x120 [hv_sock] but task is already holding lock: ffff8880c5158150 (sk_lock-AF_VSOCK){+.+.}, at: __vsock_release+0x2e/0xf0 [vsock] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sk_lock-AF_VSOCK); lock(sk_lock-AF_VSOCK); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by server/1795: #0: ffff8880c5d05ff8 (&sb->s_type->i_mutex_key#10){+.+.}, at: __sock_release+0x2d/0xa0 #1: ffff8880c5158150 (sk_lock-AF_VSOCK){+.+.}, at: __vsock_release+0x2e/0xf0 [vsock] stack backtrace: CPU: 5 PID: 1795 Comm: server Not tainted 5.3.0+ #1 Call Trace: dump_stack+0x67/0x90 __lock_acquire.cold.67+0xd2/0x20b lock_acquire+0xb5/0x1c0 lock_sock_nested+0x6d/0x90 hvs_release+0x10/0x120 [hv_sock] __vsock_release+0x24/0xf0 [vsock] __vsock_release+0xa0/0xf0 [vsock] vsock_release+0x12/0x30 [vsock] __sock_release+0x37/0xa0 sock_close+0x14/0x20 __fput+0xc1/0x250 task_work_run+0x98/0xc0 do_exit+0x344/0xc60 do_group_exit+0x47/0xb0 get_signal+0x15c/0xc50 do_signal+0x30/0x720 exit_to_usermode_loop+0x50/0xa0 do_syscall_64+0x24e/0x270 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f4184e85f31 Tested-by: Stefano Garzarella Signed-off-by: Dexuan Cui Reviewed-by: Stefano Garzarella Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

udp: fix gso_segs calculations

2019-10-07T16:58:23Z

[ Upstream commit 44b321e5020d782ad6e8ae8183f09b163be6e6e2 ] Commit dfec0ee22c0a ("udp: Record gso_segs when supporting UDP segmentation offload") added gso_segs calculation, but incorrectly got sizeof() the pointer and not the underlying data type. In addition let's fix the v6 case. Fixes: bec1f6f69736 ("udp: generate gso with UDP_SEGMENT") Fixes: dfec0ee22c0a ("udp: Record gso_segs when supporting UDP segmentation offload") Signed-off-by: Josh Hunt Reviewed-by: Alexander Duyck Acked-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tipc: fix unlimited bundling of small messages

2019-10-07T16:58:22Z

[ Upstream commit e95584a889e1902fdf1ded9712e2c3c3083baf96 ] We have identified a problem with the "oversubscription" policy in the link transmission code. When small messages are transmitted, and the sending link has reached the transmit window limit, those messages will be bundled and put into the link backlog queue. However, bundles of data messages are counted at the 'CRITICAL' level, so that the counter for that level, instead of the counter for the real, bundled message's level is the one being increased. Subsequent, to-be-bundled data messages at non-CRITICAL levels continue to be tested against the unchanged counter for their own level, while contributing to an unrestrained increase at the CRITICAL backlog level. This leaves a gap in congestion control algorithm for small messages that can result in starvation for other users or a "real" CRITICAL user. Even that eventually can lead to buffer exhaustion & link reset. We fix this by keeping a 'target_bskb' buffer pointer at each levels, then when bundling, we only bundle messages at the same importance level only. This way, we know exactly how many slots a certain level have occupied in the queue, so can manage level congestion accurately. By bundling messages at the same level, we even have more benefits. Let consider this: - One socket sends 64-byte messages at the 'CRITICAL' level; - Another sends 4096-byte messages at the 'LOW' level; When a 64-byte message comes and is bundled the first time, we put the overhead of message bundle to it (+ 40-byte header, data copy, etc.) for later use, but the next message can be a 4096-byte one that cannot be bundled to the previous one. This means the last bundle carries only one payload message which is totally inefficient, as for the receiver also! Later on, another 64-byte message comes, now we make a new bundle and the same story repeats... With the new bundling algorithm, this will not happen, the 64-byte messages will be bundled together even when the 4096-byte message(s) comes in between. However, if the 4096-byte messages are sent at the same level i.e. 'CRITICAL', the bundling algorithm will again cause the same overhead. Also, the same will happen even with only one socket sending small messages at a rate close to the link transmit's one, so that, when one message is bundled, it's transmitted shortly. Then, another message comes, a new bundle is created and so on... We will solve this issue radically by another patch. Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Reported-by: Hoang Le Acked-by: Jon Maloy Signed-off-by: Tuong Lien Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

sch_dsmark: fix potential NULL deref in dsmark_init()

2019-10-07T16:58:22Z

[ Upstream commit 474f0813a3002cb299bb73a5a93aa1f537a80ca8 ] Make sure TCA_DSMARK_INDICES was provided by the user. syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8799 Comm: syz-executor235 Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nla_get_u16 include/net/netlink.h:1501 [inline] RIP: 0010:dsmark_init net/sched/sch_dsmark.c:364 [inline] RIP: 0010:dsmark_init+0x193/0x640 net/sched/sch_dsmark.c:339 Code: 85 db 58 0f 88 7d 03 00 00 e8 e9 1a ac fb 48 8b 9d 70 ff ff ff 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 ca RSP: 0018:ffff88809426f3b8 EFLAGS: 00010247 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff85c6eb09 RDX: 0000000000000000 RSI: ffffffff85c6eb17 RDI: 0000000000000004 RBP: ffff88809426f4b0 R08: ffff88808c4085c0 R09: ffffed1015d26159 R10: ffffed1015d26158 R11: ffff8880ae930ac7 R12: ffff8880a7e96940 R13: dffffc0000000000 R14: ffff88809426f8c0 R15: 0000000000000000 FS: 0000000001292880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 000000008ca1b000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: qdisc_create+0x4ee/0x1210 net/sched/sch_api.c:1237 tc_modify_qdisc+0x524/0x1c50 net/sched/sch_api.c:1653 rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5223 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5241 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x803/0x920 net/socket.c:2311 __sys_sendmsg+0x105/0x1d0 net/socket.c:2356 __do_sys_sendmsg net/socket.c:2365 [inline] __se_sys_sendmsg net/socket.c:2363 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440369 Fixes: 758cc43c6d73 ("[PKT_SCHED]: Fix dsmark to apply changes consistent") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman