kernel/net/wireless/rdev-ops.h, branch linux-rolling-stable

wifi: cfg80211: hide scan internals

2025-07-09T09:52:35Z

Hide the internal scan fields from mac80211 and drivers, the 'notified' variable is for internal tracking, and the 'info' is output that's passed to cfg80211_scan_done() and stored only for delayed userspace notification. Signed-off-by: Johannes Berg Reviewed-by: Benjamin Berg Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20250609213231.6a62e41858e2.I004f66e9c087cc6e6ae4a24951cf470961ee9466@changeid Signed-off-by: Johannes Berg

wifi: cfg80211/mac80211: Add support to get radio index

2025-06-24T13:19:27Z

Currently, per-radio attributes are set on per-phy basis, i.e., all the radios present in a wiphy will take attributes values sent from user. But each radio in a wiphy can get different values from userspace based on its requirement. To extend support to set per-radio attributes, add support to get radio index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX, to get user specified radio index for which attributes should be changed. Pass this to individual drivers, so that the drivers can use this radio index to change per-radio attributes when necessary. Currently, per-radio attributes identified are: NL80211_ATTR_WIPHY_TX_POWER_LEVEL NL80211_ATTR_WIPHY_ANTENNA_TX NL80211_ATTR_WIPHY_ANTENNA_RX NL80211_ATTR_WIPHY_RETRY_SHORT NL80211_ATTR_WIPHY_RETRY_LONG NL80211_ATTR_WIPHY_FRAG_THRESHOLD NL80211_ATTR_WIPHY_RTS_THRESHOLD NL80211_ATTR_WIPHY_COVERAGE_CLASS NL80211_ATTR_TXQ_LIMIT NL80211_ATTR_TXQ_MEMORY_LIMIT NL80211_ATTR_TXQ_QUANTUM By default, the radio index is set to -1. This means the attribute should be treated as a global configuration. If the user has not specified any index, then the radio index passed to individual drivers would be -1. This would indicate that the attribute applies to all radios in that wiphy. Signed-off-by: Roopni Devanathan Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com Signed-off-by: Johannes Berg

wifi: cfg80211: move link reconfig parameters into a struct

2025-03-11T09:51:58Z

Add a new struct cfg80211_ml_reconf_req to collect the link reconfiguration parameters. Signed-off-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20250308225541.0cf299c1fdd0.Id1a3b1092dc52d0d3731a8798522fdf2e052bf0b@changeid Signed-off-by: Johannes Berg

wifi: cfg80211: Add support for controlling EPCS

2025-01-13T14:34:09Z

Add support for configuring Emergency Preparedness Communication Services (EPCS) for station mode. Signed-off-by: Ilan Peer Reviewed-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20250102161730.ea54ac94445c.I11d750188bc0871e13e86146a3b5cc048d853e69@changeid Signed-off-by: Johannes Berg

wifi: cfg80211: Add support for dynamic addition/removal of links

2025-01-13T14:34:08Z

Add support for requesting dynamic addition/removal of links to the current MLO association. Signed-off-by: Ilan Peer Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20250102161730.cef23352f2a2.I79c849974c494cb1cbf9e1b22a5d2d37395ff5ac@changeid Signed-off-by: Johannes Berg

wifi: cfg80211: send MLO links tx power info in GET_INTERFACE

2024-12-04T15:14:46Z

Currently, TX power is reported on interface/wdev level as part of NL80211_CMD_GET_INTERFACE. With MLO, Multiple links can be part of an interface/wdev and hence its necessary to report the TX power of each link. Add support to send tx power for all valid links of an MLD as part of NL80211_CMD_GET_INTERFACE request. As far as userspace is concerned, there is no behavioral change for Non-ML Interfaces. For ML interfaces, userspace should fetch TX power that is nested inside NL80211_ATTR_MLO_LINKS, similar to how channel info(NL80211_ATTR_WIPHY_FREQ) is fetched. Co-developed-by: Aaradhana Sahu Signed-off-by: Aaradhana Sahu Signed-off-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20241125083217.216095-2-quic_ramess@quicinc.com Signed-off-by: Johannes Berg

wifi: cfg80211: pass net_device to .set_monitor_channel

2024-10-23T14:45:35Z

Preparation for allowing multiple monitor interfaces with different channels on a multi-radio wiphy. Signed-off-by: Felix Fietkau Link: https://patch.msgid.link/35fa652dbfebf93343f8b9a08fdef0467a2a02dc.1728462320.git-series.nbd@nbd.name Signed-off-by: Johannes Berg

wifi: cfg80211: handle DFS per link

2024-09-06T11:01:05Z

Currently, during starting a radar detection, no link id information is parsed and passed down. In order to support starting radar detection during Multi Link Operation, it is required to pass link id as well. Add changes to first parse and then pass link id in the start radar detection path. Additionally, update notification APIs to allow drivers/mac80211 to pass the link ID. However, everything is handled at link 0 only until all API's are ready to handle it per link. Signed-off-by: Aditya Kumar Singh Link: https://patch.msgid.link/20240906064426.2101315-6-quic_adisi@quicinc.com Signed-off-by: Johannes Berg

wifi: cfg80211: extend interface combination check for multi-radio

2024-07-09T09:29:59Z

Add a field in struct iface_combination_params to check per-radio interface combinations instead of per-wiphy ones. Signed-off-by: Felix Fietkau Link: https://patch.msgid.link/32b28da89c2d759b0324deeefe2be4cee91de18e.1720514221.git-series.nbd@nbd.name Signed-off-by: Johannes Berg

wifi: cfg80211: Always call tracing

2024-06-26T08:22:12Z

Call the tracing function even if the cfg80211 callbacks are not set. This would allow better understanding of user space actions. Reviewed-by: Miriam Rachel Korenblit Signed-off-by: Ilan Peer Link: https://patch.msgid.link/20240614093541.018cb816e176.I28f68740a6b42144346f5c175c7874b0a669a364@changeid Signed-off-by: Johannes Berg