xfrm: remove output_finish indirection from xfrm_state_afinfo

2020-05-06T07:40:08Z

There are only two implementaions, one for ipv4 and one for ipv6. Both are almost identical, they clear skb->cb[], set the TRANSFORMED flag in IP(6)CB and then call the common xfrm_output() function. By placing the IPCB handling into the common function, we avoid the need for the output_finish indirection as the output functions can simply use xfrm_output(). Signed-off-by: Florian Westphal Signed-off-by: Steffen Klassert

xfrm: move xfrm4_extract_header to common helper

2020-05-06T07:40:08Z

The function only initializes the XFRM CB in the skb. After previous patch xfrm4_extract_header is only called from net/xfrm/xfrm_{input,output}.c. Because of IPV6=m linker errors the ipv6 equivalent (xfrm6_extract_header) was already placed in xfrm_inout.h because we can't call functions residing in a module from the core. So do the same for the ipv4 helper and place it next to the ipv6 one. Signed-off-by: Florian Westphal Signed-off-by: Steffen Klassert

xfrm: state: remove extract_input indirection from xfrm_state_afinfo

2020-05-06T07:40:08Z

In order to keep CONFIG_IPV6=m working, xfrm6_extract_header needs to be duplicated. It will be removed again in a followup change when the remaining caller is moved to net/xfrm as well. Signed-off-by: Florian Westphal Signed-off-by: Steffen Klassert

xfrm: avoid extract_output indirection for ipv4

2020-05-06T07:40:08Z

We can use a direct call for ipv4, so move the needed functions to net/xfrm/xfrm_output.c and call them directly. For ipv6 the indirection can be avoided as well but it will need a bit more work -- to ease review it will be done in another patch. Signed-off-by: Florian Westphal Signed-off-by: Steffen Klassert

xfrm: remove eth_proto value from xfrm_state_afinfo

2019-06-06T06:34:50Z

xfrm_prepare_input needs to lookup the state afinfo backend again to fetch the address family ethernet protocol value. There are only two address families, so a switch statement is simpler. While at it, use u8 for family and proto and remove the owner member -- its not used anywhere. Signed-off-by: Florian Westphal Signed-off-by: Steffen Klassert

xfrm: remove init_flags indirection from xfrm_state_afinfo

2019-06-05T11:16:30Z

There is only one implementation of this function; just call it directly. Signed-off-by: Florian Westphal Signed-off-by: Steffen Klassert

xfrm: remove init_temprop indirection from xfrm_state_afinfo

2019-06-05T11:16:30Z

same as previous patch: just place this in the caller, no need to have an indirection for a structure initialization. Signed-off-by: Florian Westphal Signed-off-by: Steffen Klassert

xfrm: remove init_tempsel indirection from xfrm_state_afinfo

2019-06-05T11:16:30Z

Simple initialization, handle it in the caller. Signed-off-by: Florian Westphal Signed-off-by: Steffen Klassert

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

xfrm: remove unused function

2017-01-10T09:57:12Z

Has been ifdef'd out for more than 10 years, remove it. Signed-off-by: Florian Westphal Signed-off-by: Steffen Klassert

kernel/net/ipv4/xfrm4_state.c, branch linux-rolling-lts

xfrm: remove output_finish indirection from xfrm_state_afinfo

xfrm: move xfrm4_extract_header to common helper

xfrm: state: remove extract_input indirection from xfrm_state_afinfo

xfrm: avoid extract_output indirection for ipv4

xfrm: remove eth_proto value from xfrm_state_afinfo

xfrm: remove init_flags indirection from xfrm_state_afinfo

xfrm: remove init_temprop indirection from xfrm_state_afinfo

xfrm: remove init_tempsel indirection from xfrm_state_afinfo

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

xfrm: remove unused function