kernel/net/core/net-traces.c, branch linux-5.1.y

trace: events: add a few neigh tracepoints

2019-02-17T18:33:39Z

The goal here is to trace neigh state changes covering all possible neigh update paths. Plus have a specific trace point in neigh_update to cover flags sent to neigh_update. Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller

net/ipv6: Udate fib6_table_lookup tracepoint

2018-05-25T03:01:15Z

Commit bb0ad1987e96 ("ipv6: fib6_rules: support for match on sport, dport and ip proto") added support for protocol and ports to FIB rules. Update the FIB lookup tracepoint to dump the parameters. Signed-off-by: David Ahern Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-11-04T00:26:51Z

Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

tcp: add tracepoint trace_tcp_send_reset

2017-10-24T00:21:25Z

New tracepoint trace_tcp_send_reset is added and called from tcp_v4_send_reset(), tcp_v6_send_reset() and tcp_send_active_reset(). Signed-off-by: Song Liu Signed-off-by: David S. Miller

tcp: add a tracepoint for tcp retransmission

2017-10-15T01:45:15Z

We need a real-time notification for tcp retransmission for monitoring. Of course we could use ftrace to dynamically instrument this kernel function too, however we can't retrieve the connection information at the same time, for example perf-tools [1] reads /proc/net/tcp for socket details, which is slow when we have a lots of connections. Therefore, this patch adds a tracepoint for __tcp_retransmit_skb() and exposes src/dst IP addresses and ports of the connection. This also makes it easier to integrate into perf. Note, I expose both IPv4 and IPv6 addresses at the same time: for a IPv4 socket, v4 mapped address is used as IPv6 addresses, for a IPv6 socket, LOOPBACK4_IPV6 is already filled by kernel. Also, add sk and skb pointers as they are useful for BPF. 1. https://github.com/brendangregg/perf-tools/blob/master/net/tcpretrans Cc: Eric Dumazet Cc: Alexei Starovoitov Cc: Hannes Frederic Sowa Cc: Brendan Gregg Cc: Neal Cardwell Signed-off-by: Cong Wang Acked-by: Alexei Starovoitov Acked-by: Brendan Gregg Signed-off-by: David S. Miller

bridge: add tracepoint in br_fdb_update

2017-08-31T18:42:41Z

This extends bridge fdb table tracepoints to also cover learned fdb entries in the br_fdb_update path. Note that unlike other tracepoints I have moved this to when the fdb is modified because this is in the datapath and can generate a lot of noise in the trace output. br_fdb_update is also called from added_by_user context in the NTF_USE case which is already traced ..hence the !added_by_user check. Signed-off-by: Roopa Prabhu Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

bridge: fdb add and delete tracepoints

2017-08-29T21:49:45Z

A few useful tracepoints to trace bridge forwarding database updates. Signed-off-by: Roopa Prabhu Reviewed-by: Florian Fainelli Acked-by: Nikolay Aleksandrov Signed-off-by: David S. Miller

qdisc: add tracepoint qdisc:qdisc_dequeue for dequeued SKBs

2017-08-16T21:10:10Z

The main purpose of this tracepoint is to monitor bulk dequeue in the network qdisc layer, as it cannot be deducted from the existing qdisc stats. The txq_state can be used for determining the reason for zero packet dequeues, see enum netdev_queue_state_t. Notice all packets doesn't necessary activate this tracepoint. As qdiscs with flag TCQ_F_CAN_BYPASS, can directly invoke sch_direct_xmit() when qdisc_qlen is zero. Remember that perf record supports filters like: perf record -e qdisc:qdisc_dequeue \ --filter 'ifindex == 4 && (packets > 1 || txq_state > 0)' Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller

net: IPv6 fib lookup tracepoint

2015-11-22T16:54:10Z

Add tracepoint to show fib6 table lookups and result. Signed-off-by: David Ahern Signed-off-by: David S. Miller