kernel/lib/dma-debug.c, branch linux-5.1.y

dma-mapping: move all DMA mapping code to kernel/dma

2018-06-14T06:50:37Z

Currently the code is split over various files with dma- prefixes in the lib/ and drives/base directories, and the number of files keeps growing. Move them into a single directory to keep the code together and remove the file name prefixes. To match the irq infrastructure this directory is placed under the kernel/ directory. Signed-off-by: Christoph Hellwig

dma-debug: check scatterlist segments

2018-05-24T07:24:17Z

Drivers/subsystems creating scatterlists for DMA should be taking care to respect the scatter-gather limitations of the appropriate device, as described by dma_parms. A DMA API implementation cannot feasibly split a scatterlist into *more* entries than originally passed, so it is not well defined what they should do when given a segment larger than the limit they are also required to respect. Conversely, devices which are less limited than the rather conservative defaults, or indeed have no limitations at all (e.g. GPUs with their own internal MMU), should be encouraged to set appropriate dma_parms, as they may get more efficient DMA mapping performance out of it. Signed-off-by: Robin Murphy Signed-off-by: Christoph Hellwig

dma-debug: unexport dma_debug_resize_entries and debug_dma_dump_mappings

2018-05-08T11:03:21Z

Only used by the AMD GART and Intel VT-D drivers, which must be built in. Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy

dma-debug: simplify counting of preallocated requests

2018-05-08T11:03:05Z

Just keep a single variable with a descriptive name instead of two with confusing names. Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy

dma-debug: move initialization to common code

2018-05-08T11:02:42Z

Most mainstream architectures are using 65536 entries, so lets stick to that. If someone is really desperate to override it that can still be done through , but I'd rather see a really good rationale for that. dma_debug_init is now called as a core_initcall, which for many architectures means much earlier, and provides dma-debug functionality earlier in the boot process. This should be safe as it only relies on the memory allocator already being available. Signed-off-by: Christoph Hellwig Acked-by: Marek Szyprowski Reviewed-by: Robin Murphy

dma-debug: fix memory leak in debug_dma_alloc_coherent

2018-02-22T23:02:33Z

Marty reported a memory leakage introduced by commit 3aaabbf1c39e ("lib/dma-debug.c: fix incorrect pfn calculation"). Fix it by checking the virtual address before allocating the entry. This patch also use virt_addr_valid() instead of virt_to_page() to check if a virtual address is linear. Fixes: 3aaabbf1 ("lib/dma-debug.c: fix incorrect pfn calculation") Reported-by: Marty Faltesek Signed-off-by: Miles Chen Acked-by: Robin Murphy Signed-off-by: Christoph Hellwig

lib/dma-debug.c: fix incorrect pfn calculation

2017-11-18T00:10:00Z

dma-debug reports the following warning: WARNING: CPU: 3 PID: 298 at kernel-4.4/lib/dma-debug.c:604 debug _dma_assert_idle+0x1a8/0x230() DMA-API: cpu touching an active dma mapped cacheline [cln=0x00000882300] CPU: 3 PID: 298 Comm: vold Tainted: G W O 4.4.22+ #1 Hardware name: MT6739 (DT) Call trace: debug_dma_assert_idle+0x1a8/0x230 wp_page_copy.isra.96+0x118/0x520 do_wp_page+0x4fc/0x534 handle_mm_fault+0xd4c/0x1310 do_page_fault+0x1c8/0x394 do_mem_abort+0x50/0xec I found that debug_dma_alloc_coherent() and debug_dma_free_coherent() assume that dma_alloc_coherent() always returns a linear address. However it's possible that dma_alloc_coherent() returns a non-linear address. In this case, page_to_pfn(virt_to_page(virt)) will return an incorrect pfn. If the pfn is valid and mapped as a COW page, we will hit the warning when doing wp_page_copy(). Fix this by calculating pfn for linear and non-linear addresses. [miles.chen@mediatek.com: v4] Link: http://lkml.kernel.org/r/1510872972-23919-1-git-send-email-miles.chen@mediatek.com Link: http://lkml.kernel.org/r/1506484087-1177-1-git-send-email-miles.chen@mediatek.com Signed-off-by: Miles Chen Reviewed-by: Robin Murphy Cc: Christoph Hellwig Cc: Marek Szyprowski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2017-05-09T22:40:28Z

Pull dmaengine updates from Vinod Koul: "This time again a smaller update consisting of: - support for TI DA8xx dma controller and updates to the cppi driver - updates on bunch of drivers like xilinx, pl08x, stm32-dma, mv_xor, ioat, dmatest" * tag 'dmaengine-4.12-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (35 commits) dmaengine: pl08x: remove lock documentation dmaengine: pl08x: fix pl08x_dma_chan_state documentation dmaengine: pl08x: Use the BIT() macro consistently dmaengine: pl080: Fix some missing kerneldoc dmaengine: pl080: Cut some unused defines dmaengine: dmatest: Add check for supported buffer count (sg_buffers) dmaengine: dmatest: Select DMA_ENGINE_RAID as its needed for the slave_sg test dmaengine: virt-dma: Convert to use list_for_each_entry_safe() dma-debug: use offset_in_page() macro dmaengine: mv_xor: use offset_in_page() macro dmaengine: dmatest: use offset_in_page() macro dmaengine: sun4i: fix invalid argument dmaengine: ioat: use setup_timer dmaengine: cppi41: Fix an Oops happening in cppi41_dma_probe() dmaengine: pl330: remove pdata based initialization dmaengine: cppi: fix build error due to bad variable dmaengine: imx-sdma: add 1ms delay to ensure SDMA channel is stopped dmaengine: cppi41: use managed functions devm_*() dmaengine: cppi41: fix cppi41_dma_tx_status() logic dmaengine: qcom_hidma: pause the channel on shutdown ...

lib/dma-debug.c: make locking work for RT

2017-05-03T22:52:07Z

Interrupt enable/disabled with spinlock is not a valid operation for RT as it can make executing tasks sleep from a non-sleepable context. So convert it to spin_lock_irq[save, restore]. Link: http://lkml.kernel.org/r/1492065666-3816-1-git-send-email-pagupta@redhat.com Signed-off-by: Pankaj Gupta Cc: Ingo Molnar Cc: Niklas Söderlund Cc: Vinod Koul Cc: Andy Lutomirski Cc: Ville Syrjl Cc: Miles Chen Cc: Marcelo Tosatti Cc: Joerg Roedel Cc: Stanislaw Gruszka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

dma-debug: use offset_in_page() macro

2017-04-24T13:10:04Z

Use offset_in_page() macro instead of open-coding. Signed-off-by: Geliang Tang Signed-off-by: Vinod Koul