kernel/ipc/msg.c, branch linux-5.12.y

ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry

2021-05-26T10:59:11Z

commit a11ddb37bf367e6b5239b95ca759e5389bb46048 upstream. do_mq_timedreceive calls wq_sleep with a stack local address. The sender (do_mq_timedsend) uses this address to later call pipelined_send. This leads to a very hard to trigger race where a do_mq_timedreceive call might return and leave do_mq_timedsend to rely on an invalid address, causing the following crash: RIP: 0010:wake_q_add_safe+0x13/0x60 Call Trace: __x64_sys_mq_timedsend+0x2a9/0x490 do_syscall_64+0x80/0x680 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5928e40343 The race occurs as: 1. do_mq_timedreceive calls wq_sleep with the address of `struct ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it holds a valid `struct ext_wait_queue *` as long as the stack has not been overwritten. 2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call __pipelined_op. 3. Sender calls __pipelined_op::smp_store_release(&this->state, STATE_READY). Here is where the race window begins. (`this` is `ewq_addr`.) 4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it will see `state == STATE_READY` and break. 5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's stack. (Although the address may not get overwritten until another function happens to touch it, which means it can persist around for an indefinite time.) 6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a `struct ext_wait_queue *`, and uses it to find a task_struct to pass to the wake_q_add_safe call. In the lucky case where nothing has overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct. In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a bogus address as the receiver's task_struct causing the crash. do_mq_timedsend::__pipelined_op() should not dereference `this` after setting STATE_READY, as the receiver counterpart is now free to return. Change __pipelined_op to call wake_q_add_safe on the receiver's task_struct returned by get_task_struct, instead of dereferencing `this` which sits on the receiver's stack. As Manfred pointed out, the race potentially also exists in ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare. Fix those in the same way. Link: https://lkml.kernel.org/r/20210510102950.12551-1-varad.gautam@suse.com Fixes: c5b2cbdbdac563 ("ipc/mqueue.c: update/document memory barriers") Fixes: 8116b54e7e23ef ("ipc/sem.c: document and update memory barriers") Fixes: 0d97a82ba830d8 ("ipc/msg.c: update and document memory barriers") Signed-off-by: Varad Gautam Reported-by: Matthias von Faber Acked-by: Davidlohr Bueso Acked-by: Manfred Spraul Cc: Christian Brauner Cc: Oleg Nesterov Cc: "Eric W. Biederman" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

ipc/msg: add missing annotation for freeque()

2020-06-08T18:05:55Z

Sparse reports a warning at freeque() warning: context imbalance in freeque() - unexpected unlock The root cause is the missing annotation at freeque() Add the missing __releases(RCU) annotation Add the missing __releases(&msq->q_perm) annotation Signed-off-by: Jules Irenge Signed-off-by: Andrew Morton Reviewed-by: Andrew Morton Cc: Boqun Feng Cc: Lu Shuaibing Cc: Nathan Chancellor Cc: Manfred Spraul Cc: Davidlohr Bueso Link: http://lkml.kernel.org/r/20200403160505.2832-2-jbi.octave@gmail.com Signed-off-by: Linus Torvalds

ipc/msg.c: consolidate all xxxctl_down() functions

2020-02-04T03:05:24Z

A use of uninitialized memory in msgctl_down() because msqid64 in ksys_msgctl hasn't been initialized. The local | msqid64 | is created in ksys_msgctl() and then passed into msgctl_down(). Along the way msqid64 is never initialized before msgctl_down() checks msqid64->msg_qbytes. KUMSAN(KernelUninitializedMemorySantizer, a new error detection tool) reports: ================================================================== BUG: KUMSAN: use of uninitialized memory in msgctl_down+0x94/0x300 Read of size 8 at addr ffff88806bb97eb8 by task syz-executor707/2022 CPU: 0 PID: 2022 Comm: syz-executor707 Not tainted 5.2.0-rc4+ #63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x75/0xae __kumsan_report+0x17c/0x3e6 kumsan_report+0xe/0x20 msgctl_down+0x94/0x300 ksys_msgctl.constprop.14+0xef/0x260 do_syscall_64+0x7e/0x1f0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x4400e9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd869e0598 EFLAGS: 00000246 ORIG_RAX: 0000000000000047 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004400e9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 00000000006ca018 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000ffffffff R11: 0000000000000246 R12: 0000000000401970 R13: 0000000000401a00 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:ffffea0001aee5c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x100000000000000() raw: 0100000000000000 0000000000000000 ffffffff01ae0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kumsan: bad access detected ================================================================== Syzkaller reproducer: msgctl$IPC_RMID(0x0, 0x0) C reproducer: // autogenerated by syzkaller (https://github.com/google/syzkaller) int main(void) { syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); syscall(__NR_msgctl, 0, 0, 0); return 0; } [natechancellor@gmail.com: adjust indentation in ksys_msgctl] Link: https://github.com/ClangBuiltLinux/linux/issues/829 Link: http://lkml.kernel.org/r/20191218032932.37479-1-natechancellor@gmail.com Link: http://lkml.kernel.org/r/20190613014044.24234-1-shuaibinglu@126.com Signed-off-by: Lu Shuaibing Signed-off-by: Nathan Chancellor Suggested-by: Arnd Bergmann Cc: Davidlohr Bueso Cc: Manfred Spraul Cc: NeilBrown From: Andrew Morton Subject: drivers/block/null_blk_main.c: fix layout Each line here overflows 80 cols by exactly one character. Delete one tab per line to fix. Cc: Shaohua Li Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ipc/msg.c: update and document memory barriers

2020-02-04T03:05:24Z

Transfer findings from ipc/mqueue.c: - A control barrier was missing for the lockless receive case So in theory, not yet initialized data may have been copied to user space - obviously only for architectures where control barriers are not NOP. - use smp_store_release(). In theory, the refount may have been decreased to 0 already when wake_q_add() tries to get a reference. Link: http://lkml.kernel.org/r/20191020123305.14715-5-manfred@colorfullife.com Signed-off-by: Manfred Spraul Cc: Waiman Long Cc: Davidlohr Bueso Cc: <1vier1@web.de> Cc: Peter Zijlstra Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ipc: rename old-style shmctl/semctl/msgctl syscalls

2019-01-25T16:22:50Z

The behavior of these system calls is slightly different between architectures, as determined by the CONFIG_ARCH_WANT_IPC_PARSE_VERSION symbol. Most architectures that implement the split IPC syscalls don't set that symbol and only get the modern version, but alpha, arm, microblaze, mips-n32, mips-n64 and xtensa expect the caller to pass the IPC_64 flag. For the architectures that so far only implement sys_ipc(), i.e. m68k, mips-o32, powerpc, s390, sh, sparc, and x86-32, we want the new behavior when adding the split syscalls, so we need to distinguish between the two groups of architectures. The method I picked for this distinction is to have a separate system call entry point: sys_old_*ctl() now uses ipc_parse_version, while sys_*ctl() does not. The system call tables of the five architectures are changed accordingly. As an additional benefit, we no longer need the configuration specific definition for ipc_parse_version(), it always does the same thing now, but simply won't get called on architectures with the modern interface. A small downside is that on architectures that do set ARCH_WANT_IPC_PARSE_VERSION, we now have an extra set of entry points that are never called. They only add a few bytes of bloat, so it seems better to keep them compared to adding yet another Kconfig symbol. I considered adding new syscall numbers for the IPC_64 variants for consistency, but decided against that for now. Signed-off-by: Arnd Bergmann

y2038: globally rename compat_time to old_time32

2018-08-27T12:48:48Z

Christoph Hellwig suggested a slightly different path for handling backwards compatibility with the 32-bit time_t based system calls: Rather than simply reusing the compat_sys_* entry points on 32-bit architectures unchanged, we get rid of those entry points and the compat_time types by renaming them to something that makes more sense on 32-bit architectures (which don't have a compat mode otherwise), and then share the entry points under the new name with the 64-bit architectures that use them for implementing the compatibility. The following types and interfaces are renamed here, and moved from linux/compat_time.h to linux/time32.h: old new --- --- compat_time_t old_time32_t struct compat_timeval struct old_timeval32 struct compat_timespec struct old_timespec32 struct compat_itimerspec struct old_itimerspec32 ns_to_compat_timeval() ns_to_old_timeval32() get_compat_itimerspec64() get_old_itimerspec32() put_compat_itimerspec64() put_old_itimerspec32() compat_get_timespec64() get_old_timespec32() compat_put_timespec64() put_old_timespec32() As we already have aliases in place, this patch addresses only the instances that are relevant to the system call interface in particular, not those that occur in device drivers and other modules. Those will get handled separately, while providing the 64-bit version of the respective interfaces. I'm not renaming the timex, rusage and itimerval structures, as we are still debating what the new interface will look like, and whether we will need a replacement at all. This also doesn't change the names of the syscall entry points, which can be done more easily when we actually switch over the 32-bit architectures to use them, at that point we need to change COMPAT_SYSCALL_DEFINEx to SYSCALL_DEFINEx with a new name, e.g. with a _time32 suffix. Suggested-by: Christoph Hellwig Link: https://lore.kernel.org/lkml/20180705222110.GA5698@infradead.org/ Signed-off-by: Arnd Bergmann

ipc/util.c: further variable name cleanups

2018-08-22T17:52:52Z

The varable names got a mess, thus standardize them again: id: user space id. Called semid, shmid, msgid if the type is known. Most functions use "id" already. idx: "index" for the idr lookup Right now, some functions use lid, ipc_addid() already uses idx as the variable name. seq: sequence number, to avoid quick collisions of the user space id key: user space key, used for the rhash tree Link: http://lkml.kernel.org/r/20180712185241.4017-12-manfred@colorfullife.com Signed-off-by: Manfred Spraul Cc: Dmitry Vyukov Cc: Davidlohr Bueso Cc: Davidlohr Bueso Cc: Herbert Xu Cc: Kees Cook Cc: Michael Kerrisk Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ipc: simplify ipc initialization

2018-08-22T17:52:52Z

Now that we know that rhashtable_init() will not fail, we can get rid of a lot of the unnecessary cleanup paths when the call errored out. [manfred@colorfullife.com: variable name added to util.h to resolve checkpatch warning] Link: http://lkml.kernel.org/r/20180712185241.4017-11-manfred@colorfullife.com Signed-off-by: Davidlohr Bueso Signed-off-by: Manfred Spraul Cc: Dmitry Vyukov Cc: Herbert Xu Cc: Kees Cook Cc: Michael Kerrisk Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ipc: rename ipcctl_pre_down_nolock()

2018-08-22T17:52:51Z

Both the comment and the name of ipcctl_pre_down_nolock() are misleading: The function must be called while holdling the rw semaphore. Therefore the patch renames the function to ipcctl_obtain_check(): This name matches the other names used in util.c: - "obtain" function look up a pointer in the idr, without acquiring the object lock. - The caller is responsible for locking. - _check means that the sequence number is checked. Link: http://lkml.kernel.org/r/20180712185241.4017-5-manfred@colorfullife.com Signed-off-by: Manfred Spraul Reviewed-by: Davidlohr Bueso Cc: Davidlohr Bueso Cc: Dmitry Vyukov Cc: Herbert Xu Cc: Kees Cook Cc: Michael Kerrisk Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ipc/util.c: use ipc_rcu_putref() for failues in ipc_addid()

2018-08-22T17:52:51Z

ipc_addid() is impossible to use: - for certain failures, the caller must not use ipc_rcu_putref(), because the reference counter is not yet initialized. - for other failures, the caller must use ipc_rcu_putref(), because parallel operations could be ongoing already. The patch cleans that up, by initializing the refcount early, and by modifying all callers. The issues is related to the finding of syzbot+2827ef6b3385deb07eaf@syzkaller.appspotmail.com: syzbot found an issue with reading kern_ipc_perm.seq, here both read and write to already released memory could happen. Link: http://lkml.kernel.org/r/20180712185241.4017-4-manfred@colorfullife.com Signed-off-by: Manfred Spraul Cc: Dmitry Vyukov Cc: Kees Cook Cc: Davidlohr Bueso Cc: Davidlohr Bueso Cc: Herbert Xu Cc: Michael Kerrisk Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds