kernel/init, branch linux-5.11.y

seccomp: Fix CONFIG tests for Seccomp_filters

2021-05-14T08:49:54Z

[ Upstream commit 64bdc0244054f7d4bb621c8b4455e292f4e421bc ] Strictly speaking, seccomp filters are only used when CONFIG_SECCOMP_FILTER. This patch fixes the condition to enable "Seccomp_filters" in /proc/$pid/status. Signed-off-by: Kenta Tada Fixes: c818c03b661c ("seccomp: Report number of loaded filters in /proc/$pid/status") Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/OSBPR01MB26772D245E2CF4F26B76A989F5669@OSBPR01MB2677.jpnprd01.prod.outlook.com Signed-off-by: Sasha Levin

init/Kconfig: make COMPILE_TEST depend on HAS_IOMEM

2021-04-10T11:39:00Z

commit ea29b20a828511de3348334e529a3d046a180416 upstream. I read the commit log of the following two: - bc083a64b6c0 ("init/Kconfig: make COMPILE_TEST depend on !UML") - 334ef6ed06fa ("init/Kconfig: make COMPILE_TEST depend on !S390") Both are talking about HAS_IOMEM dependency missing in many drivers. So, 'depends on HAS_IOMEM' seems the direct, sensible solution to me. This does not change the behavior of UML. UML still cannot enable COMPILE_TEST because it does not provide HAS_IOMEM. The current dependency for S390 is too strong. Under the condition of CONFIG_PCI=y, S390 provides HAS_IOMEM, hence can enable COMPILE_TEST. I also removed the meaningless 'default n'. Link: https://lkml.kernel.org/r/20210224140809.1067582-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada Cc: Heiko Carstens Cc: Guenter Roeck Cc: Arnd Bergmann Cc: Kees Cook Cc: Daniel Borkmann Cc: Johannes Weiner Cc: KP Singh Cc: Nathan Chancellor Cc: Nick Terrell Cc: Quentin Perret Cc: Valentin Schneider Cc: "Enrico Weigelt, metux IT consult" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

kgdb: fix to kill breakpoints on initmem after boot

2021-03-04T11:15:43Z

commit d54ce6158e354f5358a547b96299ecd7f3725393 upstream. Currently breakpoints in kernel .init.text section are not handled correctly while allowing to remove them even after corresponding pages have been freed. Fix it via killing .init.text section breakpoints just prior to initmem pages being freed. Doug: "HW breakpoints aren't handled by this patch but it's probably not such a big deal". Link: https://lkml.kernel.org/r/20210224081652.587785-1-sumit.garg@linaro.org Signed-off-by: Sumit Garg Suggested-by: Doug Anderson Acked-by: Doug Anderson Acked-by: Daniel Thompson Tested-by: Daniel Thompson Cc: Masami Hiramatsu Cc: Steven Rostedt (VMware) Cc: Jason Wessel Cc: Peter Zijlstra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTORE

2021-03-04T11:15:38Z

commit bfe3911a91047557eb0e620f95a370aee6a248c7 upstream. Userspace has discovered the functionality offered by SYS_kcmp and has started to depend upon it. In particular, Mesa uses SYS_kcmp for os_same_file_description() in order to identify when two fd (e.g. device or dmabuf) point to the same struct file. Since they depend on it for core functionality, lift SYS_kcmp out of the non-default CONFIG_CHECKPOINT_RESTORE into the selectable syscall category. Rasmus Villemoes also pointed out that systemd uses SYS_kcmp to deduplicate the per-service file descriptor store. Note that some distributions such as Ubuntu are already enabling CHECKPOINT_RESTORE in their configs and so, by extension, SYS_kcmp. References: https://gitlab.freedesktop.org/drm/intel/-/issues/3046 Signed-off-by: Chris Wilson Cc: Kees Cook Cc: Andy Lutomirski Cc: Will Drewry Cc: Andrew Morton Cc: Dave Airlie Cc: Daniel Vetter Cc: Lucas Stach Cc: Rasmus Villemoes Cc: Cyrill Gorcunov Cc: stable@vger.kernel.org Acked-by: Daniel Vetter # DRM depends on kcmp Acked-by: Rasmus Villemoes # systemd uses kcmp Reviewed-by: Cyrill Gorcunov Reviewed-by: Kees Cook Acked-by: Thomas Zimmermann Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20210205220012.1983-1-chris@chris-wilson.co.uk Signed-off-by: Greg Kroah-Hartman

init/gcov: allow CONFIG_CONSTRUCTORS on UML to fix module gcov

2021-02-05T19:03:47Z

On ARCH=um, loading a module doesn't result in its constructors getting called, which breaks module gcov since the debugfs files are never registered. On the other hand, in-kernel constructors have already been called by the dynamic linker, so we can't call them again. Get out of this conundrum by allowing CONFIG_CONSTRUCTORS to be selected, but avoiding the in-kernel constructor calls. Also remove the "if !UML" from GCOV selecting CONSTRUCTORS now, since we really do want CONSTRUCTORS, just not kernel binary ones. Link: https://lkml.kernel.org/r/20210120172041.c246a2cac2fb.I1358f584b76f1898373adfed77f4462c8705b736@changeid Signed-off-by: Johannes Berg Reviewed-by: Peter Oberparleiter Cc: Arnd Bergmann Cc: Jessica Yu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

fgraph: Initialize tracing_graph_pause at task creation

2021-01-29T20:07:32Z

On some archs, the idle task can call into cpu_suspend(). The cpu_suspend() will disable or pause function graph tracing, as there's some paths in bringing down the CPU that can have issues with its return address being modified. The task_struct structure has a "tracing_graph_pause" atomic counter, that when set to something other than zero, the function graph tracer will not modify the return address. The problem is that the tracing_graph_pause counter is initialized when the function graph tracer is enabled. This can corrupt the counter for the idle task if it is suspended in these architectures. CPU 1 CPU 2 ----- ----- do_idle() cpu_suspend() pause_graph_tracing() task_struct->tracing_graph_pause++ (0 -> 1) start_graph_tracing() for_each_online_cpu(cpu) { ftrace_graph_init_idle_task(cpu) task-struct->tracing_graph_pause = 0 (1 -> 0) unpause_graph_tracing() task_struct->tracing_graph_pause-- (0 -> -1) The above should have gone from 1 to zero, and enabled function graph tracing again. But instead, it is set to -1, which keeps it disabled. There's no reason that the field tracing_graph_pause on the task_struct can not be initialized at boot up. Cc: stable@vger.kernel.org Fixes: 380c4b1411ccd ("tracing/function-graph-tracer: append the tracing_graph_flag") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211339 Reported-by: pierre.gondois@arm.com Signed-off-by: Steven Rostedt (VMware)

Revert "init/console: Use ttynull as a fallback when there is no console"

2021-01-08T19:02:18Z

This reverts commit 757055ae8dedf5333af17b3b5b4b70ba9bc9da4e. The commit caused that ttynull was used as the default console on several systems[1][2][3]. As a result, the console was blank even when a better alternative existed. It happened when there was no console configured on the command line and ttynull_init() was the first initcall calling register_console(). Or it happened when /dev/ did not exist when console_on_rootfs() was called. It was not able to open /dev/console even though a console driver was registered. It tried to add ttynull console but it obviously did not help. But ttynull became the preferred console and was used by /dev/console when it was available later. The commit tried to fix a historical problem that have been there for ages. The primary motivation was the commit 3cffa06aeef7ece30f6 ("printk/console: Allow to disable console output by using console="" or console=null"). It provided a clean solution for a workaround that was widely used and worked only by chance. This revert causes that the console="" or console=null command line options will again work only by chance. These options will cause that a particular console will be preferred and the default (tty) ones will not get enabled. There will be no console registered at all. As a result there won't be stdin, stdout, and stderr for the init process. But it worked exactly this way even before. The proper solution has to fulfill many conditions: + Register ttynull only when explicitly required or as the ultimate fallback. + ttynull should get associated with /dev/console but it must not become preferred console when used as a fallback. Especially, it must still be possible to replace it by a better console later. Such a change requires clean up of the register_console() code. Otherwise, it would be even harder to follow. Especially, the use of has_preferred_console and CON_CONSDEV flag is tricky. The clean up is risky. The ordering of consoles is not well defined. And any changes tend to break existing user settings. Do the revert at the least risky solution for now. [1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/ [2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/ [3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/ Reported-by: Andy Shevchenko Reported-by: Vineet Gupta Reported-by: Thomas Meyer Signed-off-by: Petr Mladek Acked-by: Greg Kroah-Hartman Acked-by: Sergey Senozhatsky Signed-off-by: Linus Torvalds

Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu

2021-01-04T18:55:19Z

Pull RCU fix from Paul McKenney: "This is a fix for a regression in the v5.10 merge window, but it was reported quite late in the v5.10 process, plus generating and testing the fix took some time. The regression is due to commit 36dadef23fcc ("kprobes: Init kprobes in early_initcall") which on powerpc can use RCU Tasks before initialization, resulting in boot failures. The fix is straightforward, simply moving initialization of RCU Tasks before the early_initcall()s. The fix has been exposed to -next and kbuild test robot testing, and has been tested by the PowerPC guys" * 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: rcu-tasks: Move RCU-tasks initialization to before early_initcall()

kasan, arm64: only use kasan_depth for software modes

2020-12-22T20:55:07Z

This is a preparatory commit for the upcoming addition of a new hardware tag-based (MTE-based) KASAN mode. Hardware tag-based KASAN won't use kasan_depth. Only define and use it when one of the software KASAN modes are enabled. No functional changes for software modes. Link: https://lkml.kernel.org/r/e16f15aeda90bc7fb4dfc2e243a14b74cc5c8219.1606161801.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov Signed-off-by: Vincenzo Frascino Reviewed-by: Catalin Marinas Reviewed-by: Alexander Potapenko Tested-by: Vincenzo Frascino Cc: Andrey Ryabinin Cc: Branislav Rankov Cc: Dmitry Vyukov Cc: Evgenii Stepanov Cc: Kevin Brodsky Cc: Marco Elver Cc: Vasily Gorbik Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block

2020-12-16T20:57:51Z

Pull block updates from Jens Axboe: "Another series of killing more code than what is being added, again thanks to Christoph's relentless cleanups and tech debt tackling. This contains: - blk-iocost improvements (Baolin Wang) - part0 iostat fix (Jeffle Xu) - Disable iopoll for split bios (Jeffle Xu) - block tracepoint cleanups (Christoph Hellwig) - Merging of struct block_device and hd_struct (Christoph Hellwig) - Rework/cleanup of how block device sizes are updated (Christoph Hellwig) - Simplification of gendisk lookup and removal of block device aliasing (Christoph Hellwig) - Block device ioctl cleanups (Christoph Hellwig) - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig) - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig) - sbitmap improvements (Pavel Begunkov) - Hybrid polling fix (Pavel Begunkov) - bvec iteration improvements (Pavel Begunkov) - Zone revalidation fixes (Damien Le Moal) - blk-throttle limit fix (Yu Kuai) - Various little fixes" * tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits) blk-mq: fix msec comment from micro to milli seconds blk-mq: update arg in comment of blk_mq_map_queue blk-mq: add helper allocating tagset->tags Revert "block: Fix a lockdep complaint triggered by request queue flushing" nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class blk-mq: add new API of blk_mq_hctx_set_fq_lock_class block: disable iopoll for split bio block: Improve blk_revalidate_disk_zones() checks sbitmap: simplify wrap check sbitmap: replace CAS with atomic and sbitmap: remove swap_lock sbitmap: optimise sbitmap_deferred_clear() blk-mq: skip hybrid polling if iopoll doesn't spin blk-iocost: Factor out the base vrate change into a separate function blk-iocost: Factor out the active iocgs' state check into a separate function blk-iocost: Move the usage ratio calculation to the correct place blk-iocost: Remove unnecessary advance declaration blk-iocost: Fix some typos in comments blktrace: fix up a kerneldoc comment block: remove the request_queue to argument request based tracepoints ...