kernel/include/uapi/sound/asequencer.h, branch linux-6.14.y

ALSA: seq: Notify UMP EP and FB changes

2025-01-12T12:12:21Z

So far we notify the sequencer client and port changes upon UMP FB changes, but those aren't really corresponding to the UMP updates. e.g. when a FB info gets updated, it's not notified but done only when some of sequencer port attribute is changed. This is no ideal behavior. This patch adds the two new sequencer event types for notifying the UMP EP and FB changes via the announce port. The new event takes snd_seq_ev_ump_notify type data, which is compatible with snd_seq_addr (where the port number is replaced with the block number). The events are sent when the EP and FB info gets updated explicitly via ioctl, or the backend UMP receives the corresponding UMP messages. The sequencer protocol version is bumped to 1.0.5 along with it. Signed-off-by: Takashi Iwai Link: https://patch.msgid.link/20250110155943.31578-9-tiwai@suse.de

ALSA: ump: Handle MIDI 1.0 Function Block in MIDI 2.0 protocol

2024-08-06T07:01:23Z

The UMP v1.1 spec says in the section 6.2.1: "If a UMP Endpoint declares MIDI 2.0 Protocol but a Function Block represents a MIDI 1.0 connection, then may optionally be used for messages to/from that Function Block." It implies that the driver can (and should) keep MIDI 1.0 CVM exceptionally for those FBs even if UMP Endpoint is running in MIDI 2.0 protocol, and the current driver lacks of it. This patch extends the sequencer port info to indicate a MIDI 1.0 port, and tries to send/receive MIDI 1.0 CVM as is when this port is the source or sink. The sequencer port flag is set by the driver at parsing FBs and GTBs although application can set it to its own user-space clients, too. Link: https://patch.msgid.link/20240806070024.14301-1-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: seq: Add tempo base unit for MIDI2 Set Tempo messages

2024-07-06T07:38:27Z

MIDI2 Set Tempo message defines the tempo in 10ns unit for finer accuracy, while MIDI1 was defined in 1us unit. For adapting this different unit, introduce "tempo_base" field to snd_seq_queue_tempo struct so that user-space can pass the proper tempo base unit. The accepted value is limited, it must be either 0, 10 or 1000. The protocol version is bumped to 1.0.4 along with this. The access with the older protocol version ignores the tempo-base value in ioctls and always treats as 1000. Reviewed-by: Jaroslav Kysela Link: https://patch.msgid.link/20240705160344.6481-1-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: seq: Replace with __packed attribute

2023-10-26T07:43:28Z

Replace the old __attribute__((packed)) with the new __packed. Only cleanup, no functional changes. Link: https://lore.kernel.org/r/20231025132314.5878-12-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: seq: ump: Handle groupless messages

2023-06-12T16:22:29Z

The UMP Utility and Stream messages are "groupless", i.e. an incoming groupless packet should be sent only to the UMP EP port, and the event with the groupless message is sent to UMP EP as is without the group translation per port. Also, the former reserved bit 0 for the client group filter is now used for groupless events. When the bit 0 is set, the groupless events are filtered out and skipped. Link: https://lore.kernel.org/r/20230612081054.17200-6-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: seq: Add UMP group filter

2023-05-23T10:11:38Z

Add a new filter bitmap for UMP groups for reducing the unnecessary read/write when the client is connected to UMP EP seq port. The new group_filter field contains the bitmap for the groups, i.e. when the bit is set, the corresponding group is filtered out and the messages to that group won't be delivered. The filter bitmap consists of each bit of 1-based UMP Group number. The bit 0 is reserved for the future use. Reviewed-by: Jaroslav Kysela Link: https://lore.kernel.org/r/20230523075358.9672-37-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: seq: Add ioctls for client UMP info query and setup

2023-05-23T10:11:36Z

Add new ioctls for sequencer clients to query and set the UMP endpoint and block information. As a sequencer client corresponds to a UMP Endpoint, one UMP Endpoint information can be assigned at most to a single sequencer client while multiple UMP block infos can be assigned by passing the type with the offset of block id (i.e. type = block_id + 1). For the kernel client, only SNDRV_SEQ_IOCTL_GET_CLIENT_UMP_INFO is allowed. Reviewed-by: Jaroslav Kysela Link: https://lore.kernel.org/r/20230523075358.9672-35-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: seq: Bind UMP device

2023-05-23T10:11:33Z

This patch introduces a new ALSA sequencer client for the kernel UMP object, snd-seq-ump-client. It's a UMP version of snd-seq-midi driver, while this driver creates a sequencer client per UMP endpoint which contains (fixed) 16 ports. The UMP rawmidi device is opened in APPEND mode for output, so that multiple sequencer clients can share the same UMP endpoint, as well as the legacy UMP rawmidi devices that are opened in APPEND mode, too. For input, on the other hand, the incoming data is processed on the fly in the dedicated hook, hence it doesn't open a rawmidi device. The UMP packet group is updated upon delivery depending on the target sequencer port (which corresponds to the actual UMP group). Each sequencer port sets a new port type bit, SNDRV_SEQ_PORT_TYPE_MIDI_UMP, in addition to the other standard types for MIDI. Reviewed-by: Jaroslav Kysela Link: https://lore.kernel.org/r/20230523075358.9672-33-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: seq: Allow suppressing UMP conversions

2023-05-23T10:11:32Z

A sequencer client like seq_dummy rather doesn't want to convert UMP events but receives / sends as is. Add a new event filter flag to suppress the automatic UMP conversion and applies accordingly. Reviewed-by: Jaroslav Kysela Link: https://lore.kernel.org/r/20230523075358.9672-32-tiwai@suse.de Signed-off-by: Takashi Iwai

ALSA: seq: Add UMP group number to snd_seq_port_info

2023-05-23T10:11:27Z

Add yet more new filed "ump_group" to snd_seq_port_info for specifying the associated UMP Group number for each sequencer port. This will be referred in the upcoming automatic UMP conversion in sequencer core. Reviewed-by: Jaroslav Kysela Link: https://lore.kernel.org/r/20230523075358.9672-30-tiwai@suse.de Signed-off-by: Takashi Iwai