kernel/include/uapi/rdma/mlx5-abi.h, branch linux-5.1.y

IB/mlx5: Fix scatter to CQE in DCT QP creation

2019-04-18T06:13:41Z

When scatter to CQE is enabled on a DCT QP it corrupts the mailbox command since it tried to treat it as as QP create mailbox command instead of a DCT create command. The corrupted mailbox command causes userspace to malfunction as the device doesn't create the QP as expected. A new mlx5 capability is exposed to user-space which ensures that it will not enable the feature on DCT without this fix in the kernel. Fixes: 5d6ff1babe78 ("IB/mlx5: Support scatter to CQE for DC transport type") Signed-off-by: Guy Levi Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

IB/mlx5: Report packet based credit mode device capability

2018-12-07T20:22:09Z

Report packet based credit mode capability via the mlx5 DV interface. Signed-off-by: Danit Goldberg Reviewed-by: Majd Dibbiny Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

IB/mlx5: Add packet based credit mode support

2018-12-07T20:22:09Z

The device can support two credit modes, message based (default) and packet based. In order to enable packet based mode, the QP should be created with special flag that indicates this. This patch adds support for the new DV QP creation flag that can be used for RC QPs in order to change the credit mode. Signed-off-by: Danit Goldberg Reviewed-by: Majd Dibbiny Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

IB/mlx5: Allow scatter to CQE without global signaled WRs

2018-10-17T15:25:41Z

Requester scatter to CQE is restricted to QPs configured to signal all WRs. This patch adds ability to enable scatter to cqe (force enable) in the requester without sig_all, for users who do not want all WRs signaled but rather just the ones whose data found in the CQE. Signed-off-by: Yonatan Cohen Reviewed-by: Guy Levi Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford

IB/mlx5: Expose RAW QP device handles to user space

2018-09-27T19:01:33Z

Expose RAW QP device handles to user space by extending the UHW part of mlx5_ib_create_qp_resp. This data is returned only when DEVX context is used where it may be applicable. Signed-off-by: Yishai Hadas Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

RDMA/mlx5: Allow creating RAW ethernet QP with loopback support

2018-09-22T00:20:59Z

Expose two new flags: MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_UC MLX5_QP_FLAG_TIR_ALLOW_SELF_LB_MC Those flags can be used at creation time in order to allow a QP to be able to receive loopback traffic (unicast and multicast). We store the state in the QP to be used on the destroy path to indicate with which flags the QP was created with. Signed-off-by: Mark Bloch Reviewed-by: Yishai Hadas Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford

Merge branch 'mlx5-dump-fill-mkey' into rdma.git for-next

2018-07-04T19:23:46Z

For dependencies, branch based on 'mellanox/mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.git Pull Dump and fill MKEY from Leon Romanovsky: ==================== MLX5 IB HCA offers the memory key, dump_fill_mkey to increase performance, when used in a send or receive operations. It is used to force local HCA operations to skip the PCI bus access, while keeping track of the processed length in the ibv_sge handling. In this three patch series, we expose various bits in our HW spec file (mlx5_ifc.h), move unneeded for mlx5_core FW command and export such memory key to user space thought our mlx5-abi header file. ==================== Botched auto-merge in mlx5_ib_alloc_ucontext() resolved by hand. * branch 'mlx5-dump-fill-mkey': IB/mlx5: Expose dump and fill memory key net/mlx5: Add hardware definitions for dump_fill_mkey net/mlx5: Limit scope of dump_fill_mkey function net/mlx5: Rate limit errors in command interface Signed-off-by: Jason Gunthorpe

IB/mlx5: Expose dump and fill memory key

2018-07-04T19:16:04Z

MLX5 IB HCA offers the memory key, dump_fill_mkey to boost performance, when used in a send or receive operations. It is used to force local HCA operations to skip the PCI bus access, while keeping track of the processed length in the ibv_sge handling. Meaning, instead of a PCI write access the HCA leaves the target memory untouched, and skips filling that packet section. Similar behavior is done upon send, the HCA skips data in memory relevant to this key and saves PCI bus access. This functionality saves PCI read/write operations. Signed-off-by: Yonatan Cohen Reviewed-by: Yishai Hadas Reviewed-by: Guy Levi Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

IB/mlx5: Introduce DEVX

2018-06-19T16:53:02Z

Introduce DEVX to enable direct device commands in downstream patches from this series. In that mode of work the firmware manages the isolation between processes' resources and as such a DEVX user id is created and assigned to the given user context upon allocation request. A capability check is done to make sure that this feature is really supported by the firmware prior to creating the DEVX user id. Signed-off-by: Yishai Hadas Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

Merge tag 'verbs_flow_counters' of git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma.git into for-next

2018-06-04T14:48:11Z

Pull verbs counters series from Leon Romanovsky: ==================== Verbs flow counters support This series comes to allow user space applications to monitor real time traffic activity and events of the verbs objects it manages, e.g.: ibv_qp, ibv_wq, ibv_flow. The API enables generic counters creation and define mapping to association with a verbs object, the current mlx5 driver is using this API for flow counters. With this API, an application can monitor the entire life cycle of object activity, defined here as a static counters attachment. This API also allows dynamic counters monitoring of measurement points for a partial period in the verbs object life cycle. In addition it presents the implementation of the generic counters interface. This will be achieved by extending flow creation by adding a new flow count specification type which allows the user to associate a previously created flow counters using the generic verbs counters interface to the created flow, once associated the user could read statistics by using the read function of the generic counters interface. The API includes: 1. create and destroyed API of a new counters objects 2. read the counters values from HW Note: Attaching API to allow application to define the measurement points per objects is a user space only API and this data is passed to kernel when the counted object (e.g. flow) is created with the counters object. =================== * tag 'verbs_flow_counters': IB/mlx5: Add counters read support IB/mlx5: Add flow counters read support IB/mlx5: Add flow counters binding support IB/mlx5: Add counters create and destroy support IB/uverbs: Add support for flow counters IB/core: Add support for flow counters IB/core: Support passing uhw for create_flow IB/uverbs: Add read counters support IB/core: Introduce counters read verb IB/uverbs: Add create/destroy counters support IB/core: Introduce counters object and its create/destroy IB/uverbs: Add an ib_uobject getter to ioctl() infrastructure net/mlx5: Export flow counter related API net/mlx5: Use flow counter pointer as input to the query function