kernel/include/uapi/linux/v4l2-controls.h, branch linux-4.1.y

[media] adv7180: Add fast switch support

2015-02-02T13:51:38Z

In fast switch mode the adv7180 (and similar) can lock onto a new signal faster when switching between different inputs. As a downside though it is no longer able to auto-detect the incoming format. The fast switch mode is exposed as a boolean v4l control that allows userspace applications to either enable or disable fast switch mode. Signed-off-by: Lars-Peter Clausen Acked-by: Federico Vaga Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

[media] v4l: Add camera pan/tilt speed controls

2014-09-21T23:23:39Z

The V4L2_CID_PAN_SPEED and V4L2_CID_TILT_SPEED controls allow to move the camera by setting its rotation speed around its axis. Signed-off-by: Vincent Palatin Reviewed-by: Pawel Osciak Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab

[media] v4l: Add test pattern colour component controls

2014-08-21T20:25:11Z

In many cases the test pattern has selectable values for each colour component. Implement controls for raw bayer components. Additional controls should be defined for colour components that are not covered by these controls. Signed-off-by: Sakari Ailus Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

[media] v4l2-ctrls: add RX RDS controls

2014-07-25T22:27:51Z

The radio-miropcm20 driver has firmware that decodes the RDS signals. So in that case the RDS data becomes available in the form of controls. Add support for these controls to the control framework, allowing the miro driver to use them. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

[media] v4l2-ctrls: add new RDS TX controls

2014-07-25T22:26:14Z

The si4713 supports several RDS features not yet implemented in the driver. This patch adds the missing RDS functionality to the list of RDS controls. The ALT_FREQS control is a compound control containing an array of up to 25 (the maximum according to the RDS standard) frequencies. To support that the V4L2_CTRL_TYPE_U32 was added. Signed-off-by: Hans Verkuil Cc: Eduardo Valentin Signed-off-by: Mauro Carvalho Chehab

[media] v4l2-ctrls/v4l2-controls.h: add MD controls

2014-07-17T14:57:27Z

Add the 'Detect' control class and the new motion detection controls. Those controls will be used by the solo6x10 and go7007 drivers. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

[media] v4l: add control for RF tuner PLL lock flag

2014-03-13T13:26:49Z

Add volatile boolean control to indicate if tuner frequency synthesizer is locked to requested frequency. That means tuner is able to receive given frequency. Control is named as "PLL lock", since frequency synthesizers are based of phase-locked-loop. Maybe more general name could be wise still? Cc: Hans Verkuil Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab

[media] v4l: reorganize RF tuner control ID numbers

2014-03-13T13:26:44Z

It appears that controls are ordered by ID number when enumerating. That could lead illogical UI as controls are usually enumerated and drawn by the application at runtime. Change order of controls by reorganizing assigned IDs now as we can. It is not reasonable possible after the API is released. Also, leave some spare space between IDs too for possible future extensions. Cc: Hans Verkuil Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab

[media] v4l: add RF tuner channel bandwidth control

2014-03-13T13:26:43Z

Modern silicon RF tuners has one or more adjustable filters on signal path, in order to filter noise from desired radio channel. Add channel bandwidth control to tell the driver which is radio channel width we want receive. Filters could be then adjusted by the driver or hardware, using RF frequency and channel bandwidth as a base of filter calculations. On automatic mode (normal mode), bandwidth is calculated from sampling rate or tuning info got from userspace. That new control gives possibility to set manual mode and let user have more control for filters. Cc: Hans Verkuil Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab

[media] v4l2-controls.h: Add addtional Flash fault bits

2014-03-11T12:57:48Z

Three Flash fault are added. V4L2_FLASH_FAULT_UNDER_VOLTAGE for the case low voltage below the min. limit. V4L2_FLASH_FAULT_INPUT_VOLTAGE for the case falling input voltage and chip adjust flash current not occur under voltage event. V4L2_FLASH_FAULT_LED_OVER_TEMPERATURE for the case the temperature exceed the maximun limit Signed-off-by: Daniel Jeong Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab