kernel/include/trace, branch linux-6.6.y

NFSD: Remove NFSERR_EAGAIN

2026-01-17T15:30:00Z

[ Upstream commit c6c209ceb87f64a6ceebe61761951dcbbf4a0baa ] I haven't found an NFSERR_EAGAIN in RFCs 1094, 1813, 7530, or 8881. None of these RFCs have an NFS status code that match the numeric value "11". Based on the meaning of the EAGAIN errno, I presume the use of this status in NFSD means NFS4ERR_DELAY. So replace the one usage of nfserr_eagain, and remove it from NFSD's NFS status conversion tables. As far as I can tell, NFSERR_EAGAIN has existed since the pre-git era, but was not actually used by any code until commit f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed."), at which time it become possible for NFSD to return a status code of 11 (which is not valid NFS protocol). Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.") Cc: stable@vger.kernel.org Reviewed-by: NeilBrown Reviewed-by: Jeff Layton Signed-off-by: Chuck Lever Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

NFS: trace: show TIMEDOUT instead of 0x6e

2026-01-17T15:30:00Z

[ Upstream commit cef48236dfe55fa266d505e8a497963a7bc5ef2a ] __nfs_revalidate_inode may return ETIMEDOUT. print symbol of ETIMEDOUT in nfs trace: before: cat-5191 [005] 119.331127: nfs_revalidate_inode_exit: error=-110 (0x6e) after: cat-1738 [004] 44.365509: nfs_revalidate_inode_exit: error=-110 (TIMEDOUT) Signed-off-by: Chen Hanxiao Reviewed-by: Jeff Layton Signed-off-by: Chuck Lever Stable-dep-of: c6c209ceb87f ("NFSD: Remove NFSERR_EAGAIN") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

filelock: add FL_RECLAIM to show_fl_flags() macro

2025-10-15T09:57:48Z

[ Upstream commit c593b9d6c446510684da400833f9d632651942f0 ] Show the FL_RECLAIM flag symbolically in tracepoints. Fixes: bb0a55bb7148 ("nfs: don't allow reexport reclaims") Signed-off-by: Jeff Layton Link: https://lore.kernel.org/20250903-filelock-v1-1-f2926902962d@kernel.org Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin

btrfs: constify more pointer parameters

2025-08-28T14:28:41Z

[ Upstream commit ca283ea9920ac20ae23ed398b693db3121045019 ] Continue adding const to parameters. This is for clarity and minor addition to safety. There are some minor effects, in the assembly code and .ko measured on release config. Signed-off-by: David Sterba Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

powerpc/thp: tracing: Hide hugepage events under CONFIG_PPC_BOOK3S_64

2025-08-28T14:28:19Z

[ Upstream commit 43cf0e05089afe23dac74fa6e1e109d49f2903c4 ] The events hugepage_set_pmd, hugepage_set_pud, hugepage_update_pmd and hugepage_update_pud are only called when CONFIG_PPC_BOOK3S_64 is defined. As each event can take up to 5K regardless if they are used or not, it's best not to define them when they are not used. Add #ifdef around these events when they are not used. Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Cc: Andrew Morton Cc: Michael Ellerman Link: https://lore.kernel.org/20250612101259.0ad43e48@batman.local.home Acked-by: David Hildenbrand Acked-by: Madhavan Srinivasan Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin

rxrpc: Fix recv-recv race of completed call

2025-07-24T06:53:20Z

[ Upstream commit 962fb1f651c2cf2083e0c3ef53ba69e3b96d3fbc ] If a call receives an event (such as incoming data), the call gets placed on the socket's queue and a thread in recvmsg can be awakened to go and process it. Once the thread has picked up the call off of the queue, further events will cause it to be requeued, and once the socket lock is dropped (recvmsg uses call->user_mutex to allow the socket to be used in parallel), a second thread can come in and its recvmsg can pop the call off the socket queue again. In such a case, the first thread will be receiving stuff from the call and the second thread will be blocked on call->user_mutex. The first thread can, at this point, process both the event that it picked call for and the event that the second thread picked the call for and may see the call terminate - in which case the call will be "released", decoupling the call from the user call ID assigned to it (RXRPC_USER_CALL_ID in the control message). The first thread will return okay, but then the second thread will wake up holding the user_mutex and, if it sees that the call has been released by the first thread, it will BUG thusly: kernel BUG at net/rxrpc/recvmsg.c:474! Fix this by just dequeuing the call and ignoring it if it is seen to be already released. We can't tell userspace about it anyway as the user call ID has become stale. Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code") Reported-by: Junvyyang, Tencent Zhuque Lab Signed-off-by: David Howells Reviewed-by: Jeffrey Altman cc: LePremierHomme cc: Marc Dionne cc: Simon Horman cc: linux-afs@lists.infradead.org Link: https://patch.msgid.link/20250717074350.3767366-3-dhowells@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

f2fs: add tracepoint for f2fs_vm_page_mkwrite()

2025-07-10T14:03:13Z

[ Upstream commit 87f3afd366f7c668be0269efda8a89741a3ea6b3 ] This patch adds to support tracepoint for f2fs_vm_page_mkwrite(), meanwhile it prints more details for trace_f2fs_filemap_fault(). Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Stable-dep-of: ba8dac350faf ("f2fs: fix to zero post-eof page") Signed-off-by: Sasha Levin

erofs: remove unused trace event erofs_destroy_inode

2025-06-27T10:09:00Z

commit 30b58444807c93bffeaba7d776110f2a909d2f9a upstream. The trace event `erofs_destroy_inode` was added but remains unused. This unused event contributes approximately 5KB to the kernel module size. Reported-by: Steven Rostedt Closes: https://lore.kernel.org/r/20250612224906.15000244@batman.local.home Fixes: 13f06f48f7bf ("staging: erofs: support tracepoint") Cc: stable@vger.kernel.org Reviewed-by: Hongbo Li Signed-off-by: Gao Xiang Link: https://lore.kernel.org/r/20250617054056.3232365-1-hsiangkao@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman

btrfs: correct the order of prelim_ref arguments in btrfs__prelim_ref

2025-06-04T12:42:16Z

[ Upstream commit bc7e0975093567f51be8e1bdf4aa5900a3cf0b1e ] btrfs_prelim_ref() calls the old and new reference variables in the incorrect order. This causes a NULL pointer dereference because oldref is passed as NULL to trace_btrfs_prelim_ref_insert(). Note, trace_btrfs_prelim_ref_insert() is being called with newref as oldref (and oldref as NULL) on purpose in order to print out the values of newref. To reproduce: echo 1 > /sys/kernel/debug/tracing/events/btrfs/btrfs_prelim_ref_insert/enable Perform some writeback operations. Backtrace: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 115949067 P4D 115949067 PUD 11594a067 PMD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 1188 Comm: fsstress Not tainted 6.15.0-rc2-tester+ #47 PREEMPT(voluntary) 7ca2cef72d5e9c600f0c7718adb6462de8149622 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014 RIP: 0010:trace_event_raw_event_btrfs__prelim_ref+0x72/0x130 Code: e8 43 81 9f ff 48 85 c0 74 78 4d 85 e4 0f 84 8f 00 00 00 49 8b 94 24 c0 06 00 00 48 8b 0a 48 89 48 08 48 8b 52 08 48 89 50 10 <49> 8b 55 18 48 89 50 18 49 8b 55 20 48 89 50 20 41 0f b6 55 28 88 RSP: 0018:ffffce44820077a0 EFLAGS: 00010286 RAX: ffff8c6b403f9014 RBX: ffff8c6b55825730 RCX: 304994edf9cf506b RDX: d8b11eb7f0fdb699 RSI: ffff8c6b403f9010 RDI: ffff8c6b403f9010 RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000010 R10: 00000000ffffffff R11: 0000000000000000 R12: ffff8c6b4e8fb000 R13: 0000000000000000 R14: ffffce44820077a8 R15: ffff8c6b4abd1540 FS: 00007f4dc6813740(0000) GS:ffff8c6c1d378000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000010eb42000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: prelim_ref_insert+0x1c1/0x270 find_parent_nodes+0x12a6/0x1ee0 ? __entry_text_end+0x101f06/0x101f09 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 btrfs_is_data_extent_shared+0x167/0x640 ? fiemap_process_hole+0xd0/0x2c0 extent_fiemap+0xa5c/0xbc0 ? __entry_text_end+0x101f05/0x101f09 btrfs_fiemap+0x7e/0xd0 do_vfs_ioctl+0x425/0x9d0 __x64_sys_ioctl+0x75/0xc0 Signed-off-by: Goldwyn Rodrigues Signed-off-by: David Sterba Signed-off-by: Sasha Levin

tracing: Add __print_dynamic_array() helper

2025-05-02T05:50:37Z

[ Upstream commit e52750fb1458ae9ea5860a08ed7a149185bc5b97 ] When printing a dynamic array in a trace event, the method is rather ugly. It has the format of: __print_array(__get_dynamic_array(array), __get_dynmaic_array_len(array) / el_size, el_size) Since dynamic arrays are known to the tracing infrastructure, create a helper macro that does the above for you. __print_dynamic_array(array, el_size) Which would expand to the same output. Signed-off-by: Steven Rostedt (Google) Signed-off-by: Avadhut Naik Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Qiuxu Zhuo Link: https://lore.kernel.org/r/20241022194158.110073-3-avadhut.naik@amd.com Stable-dep-of: ea8d7647f9dd ("tracing: Verify event formats that have "%*p.."") Signed-off-by: Sasha Levin