kernel/include/soc/tegra/pmc.h, branch linux-5.11.y

soc: tegra: fix tegra_pmc_get_suspend_mode definition

2020-04-17T15:20:44Z

When CONFIG_PM_SLEEP is disabled, the function is not defined, causing a link failure: arm-linux-gnueabi-ld: drivers/cpuidle/cpuidle-tegra.o: in function `tegra_cpuidle_probe': cpuidle-tegra.c:(.text+0x24): undefined reference to `tegra_pmc_get_suspend_mode' Change the #ifdef check according to the definition. Fixes: 382ac8e22b90 ("cpuidle: tegra: Disable CC6 state if LP2 unavailable") Signed-off-by: Arnd Bergmann Reviewed-by: Dmitry Osipenko Acked-by: Thierry Reding Signed-off-by: Arnd Bergmann

soc/tegra: pmc: Add pins for Tegra194

2020-03-13T09:53:10Z

Extend the Tegra194 IO pad table with additional information such as pin names and 1.8/3.3 V settings to allow a table of voltage control pins to generated from it. This is similar to what's done for older chips and is needed to support high-speed modes for SDHCI where switching the pins to 1.8V or 3.3V is necessary. Signed-off-by: Venkat Reddy Talla Signed-off-by: Thierry Reding

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282

2019-06-05T15:36:37Z

Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman

soc/tegra: pmc: Make tegra_powergate_is_powered() a local function

2019-01-25T13:17:49Z

Now there are no more external users of tegra_powergate_is_powered(), make this a local function. Signed-off-by: Jon Hunter Signed-off-by: Thierry Reding

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2019-01-01T01:32:35Z

Pull ARM SoC driver updates from Olof Johansson: "Misc driver updates for platforms, many of them power related. - Rockchip adds power domain support for rk3066 and rk3188 - Amlogic adds a power measurement driver - Allwinner adds SRAM support for three platforms (F1C100, H5, A64 C1) - Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7 - Broadcom fixes suspend/resume with Thumb2 kernels, and improves stability of a handful of firmware/platform interfaces - PXA completes their conversion to dmaengine framework - Renesas does a bunch of PM cleanups across many platforms - Tegra adds support for suspend/resume on T186/T194, which includes some driver cleanups and addition of wake events - Tegra also adds a driver for memory controller (EMC) on Tegra2 - i.MX tweaks power domain bindings, and adds support for i.MX8MQ in GPC - Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60 and misc cleanups across several platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits) ARM: at91: add support in soc driver for new SAM9X60 ARM: at91: add support in soc driver for LPDDR2 SiP memory: omap-gpmc: Use of_node_name_eq for node name comparisons bus: ti-sysc: Check for no-reset and no-idle flags at the child level ARM: OMAP2+: Check also the first dts child for hwmod flags soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency soc: imx: gpc: Increase GPC_CLK_MAX to 7 soc: renesas: rcar-sysc: Fix power domain control after system resume soc: renesas: rcar-sysc: Merge PM Domain registration and linking soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B} dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1 dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1 dt-bindings: sram: Add Allwinner suniv F1C100s soc: sunxi: sram: Add support for the H5 SoC system control soc: sunxi: sram: Enable EMAC clock access for H3 variant soc: imx: gpcv2: add support for i.MX8MQ SoC soc: imx: gpcv2: move register access table to domain data soc: imx: gpcv2: prefix i.MX7 specific defines dmaengine: pxa: make the filter function internal ...

soc/tegra: pmc: Drop SMP dependency from CPU APIs

2018-12-14T21:32:55Z

When CONFIG_SMP is disabled, the tegra clk driver now fails to build: drivers/clk/tegra/clk-tegra30.c: In function ‘tegra30_cpu_rail_off_ready’: drivers/clk/tegra/clk-tegra30.c:1151:2: error: implicit declaration of function ‘tegra_pmc_cpu_is_powered’ [-Werror=implicit-function-declaration] cpu_pwr_status = tegra_pmc_cpu_is_powered(1) || ^ Fix the above error by removing the CONFIG_SMP ifdef around the declaration around the PMC CPU APIs because although these are not needed for non-SMP configurations, there is no harm in including these for non-SMP builds either. Fixes: 61866523ed6e ("clk: tegra30: Use Tegra CPU powergate helper function") Reported-by: Arnd Bergmann Signed-off-by: Jon Hunter Acked-by: Thierry Reding Signed-off-by: Stephen Boyd

soc/tegra: pmc: Add Tegra194 support

2018-11-28T15:45:04Z

The PMC controller on Tegra194 has a couple of new I/O pads and drops others compared to Tegra186. Signed-off-by: Thierry Reding

soc/tegra: pmc: Remove public pad voltage APIs

2018-08-27T10:25:18Z

Make tegra_io_pad_set_voltage() and tegra_io_pad_get_voltage() static and remove the prototypes from pmc.h. Remove enum tegra_io_pad_voltage and use the defines from instead. These functions aren't used outside of the pmc driver and new use cases should use the pinctrl interface instead. Signed-off-by: Aapo Vienamo Acked-by: Jon Hunter Signed-off-by: Thierry Reding

soc/tegra: pmc: Fix pad voltage configuration for Tegra186

2018-08-27T10:25:17Z

Implement support for the PMC_IMPL_E_33V_PWR register which replaces PMC_PWR_DET register interface of the SoC generations preceding Tegra186. Also add the voltage bit offsets to the tegra186_io_pads[] table and the AO_HV pad. Signed-off-by: Aapo Vienamo Acked-by: Jon Hunter Signed-off-by: Thierry Reding

soc/tegra: pmc: Consolidate Tegra186 support

2017-12-13T12:06:44Z

Move Tegra186 support to the consolidated PMC driver to reduce some of the duplication and also gain I/O pad functionality on the new SoC as a side-effect. Signed-off-by: Thierry Reding