kernel/include/soc/tegra/bpmp.h, branch linux-6.18.y

firmware: tegra: Add suspend hook and reset BPMP IPC early on resume

2023-10-13T12:20:27Z

Add suspend hook and a 'suspended' field in the 'struct tegra_bpmp' to mark if BPMP is suspended. Also, add a 'flags' field in the 'struct tegra_bpmp_message' whose 'TEGRA_BPMP_MESSAGE_RESET' bit can be set from the Tegra MC driver to signal that the reset of BPMP IPC channels is required before sending MRQ to the BPMP FW. Together both the fields allow us to handle any requests that might be sent too soon as they can cause hang during system resume. One case where we see BPMP requests being sent before the BPMP driver has resumed is the memory bandwidth requests which are triggered by onlining the CPUs during system resume. The CPUs are onlined before the BPMP has resumed and we need to reset the BPMP IPC channels to handle these requests. The additional check for 'flags' is done to avoid any un-intended BPMP IPC reset if the tegra_bpmp_transfer*() API gets called during suspend sequence after the BPMP driver is suspended. Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth") Co-developed-by: Thierry Reding Signed-off-by: Sumit Gupta Acked-by: Thierry Reding Signed-off-by: Thierry Reding

firmware: tegra: bpmp: Use iosys-map helpers

2022-10-24T13:18:11Z

The shared memory used for inter-processor communication between the CPU and the BPMP can reside either in system memory or in I/O memory. Use the iosys-map helpers to abstract these differences away. Signed-off-by: Thierry Reding

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288

2019-06-05T15:36:37Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman

firmware: tegra: add bpmp driver for Tegra210

2019-01-25T14:58:47Z

This patch adds driver for Tegra210 BPMP firmware. The BPMP is a specific processor in Tegra210 chip, which runs firmware for assisting in entering deep low power states (suspend to ram), and offloading DRAM memory clock scaling on some platforms. Based on work by Sivaram Nair Signed-off-by: Timo Alho Acked-by: Jon Hunter Signed-off-by: Thierry Reding

firmware: tegra: Refactor BPMP driver

2019-01-25T14:58:47Z

Split BPMP driver into common and chip specific parts to facilitate adding support for previous and future Tegra chips that are using BPMP as co-processor. Signed-off-by: Timo Alho Acked-by: Jon Hunter Signed-off-by: Thierry Reding

firmware: tegra: Add helper to check for supported MRQs

2018-11-08T11:49:25Z

Add a helper function to check that firmware is supporting a given MRQ command. Signed-off-by: Timo Alho Acked-by: Sivaram Nair Acked-by: Jon Hunter Signed-off-by: Thierry Reding

firmware: tegra: Simplify channel management

2018-03-08T13:20:58Z

The Tegra194 BPMP only implements 5 channels (4 to BPMP, 1 to CCPLEX), and they are not placed contiguously in memory. The current channel management in the BPMP driver does not support this. Simplify and refactor the channel management such that only one atomic transmit channel and one receive channel are supported, and channels are not required to be placed contiguously in memory. The same configuration also works on T186 so we end up with less code. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding

firmware: tegra: Add BPMP debugfs support

2017-10-19T14:27:56Z

Tegra power management firmware running on the co-processor (BPMP) implements a simple pseudo file system akin to debugfs. The file system can be used for debugging purposes to examine and change the status of selected resources controlled by the firmware (such as clocks, resets, voltages, powergates, ...). Add support to "mirror" the firmware's file system to debugfs. At boot, query firmware for a list of all possible files and create corresponding debugfs entries. Read/write of individual files is implemented by sending a Message ReQuest (MRQ) that passes the full file path name and data to firmware via DRAM. Signed-off-by: Timo Alho Reviewed-by: Jon Hunter Signed-off-by: Thierry Reding

firmware: tegra: Add stubs when BPMP not enabled

2017-10-19T14:27:56Z

Add static inline stubs to bpmp.h when CONFIG_BPMP is not enabled. This allows building BPMP-related drivers with COMPILE_TEST. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding

firmware: tegra: Expose tegra_bpmp_mrq_return()

2017-10-19T14:27:55Z

Expose and export the tegra_bpmp_mrq_return() function for use by drivers outside the core BPMP driver. This function is used to reply to messages originating from the BPMP, which is required in the thermal driver. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding