kernel/include/rdma/ib_addr.h, branch linux-4.1.y

RDMA/ucma: Introduce safer rdma_addr_size() variants

2018-05-23T01:33:56Z

[ Upstream commit 84652aefb347297aa08e91e283adf7b18f77c2d5 ] There are several places in the ucma ABI where userspace can pass in a sockaddr but set the address family to AF_IB. When that happens, rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6, and the ucma kernel code might end up copying past the end of a buffer not sized for a struct sockaddr_ib. Fix this by introducing new variants int rdma_addr_size_in6(struct sockaddr_in6 *addr); int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr); that are type-safe for the types used in the ucma ABI and return 0 if the size computed is bigger than the size of the type passed in. We can use these new variants to check what size userspace has passed in before copying any addresses. Reported-by: Signed-off-by: Roland Dreier Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

IB/cma: Fix a race condition in iboe_addr_get_sgid()

2017-01-13T01:56:58Z

[ Upstream commit fba332b079029c2f4f7e84c1c1cd8e3867310c90 ] Code that dereferences the struct net_device ip_ptr member must be protected with an in_dev_get() / in_dev_put() pair. Hence insert calls to these functions. Fixes: commit 7b85627b9f02 ("IB/cma: IBoE (RoCE) IP-based GID addressing") Signed-off-by: Bart Van Assche Reviewed-by: Moni Shoua Cc: Or Gerlitz Cc: Roland Dreier Cc: Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin

IB/core: change rdma_gid2ip into void function as it always return zero

2015-05-05T17:21:27Z

Signed-off-by: Honggang Li Acked-by: Sean Hefty Signed-off-by: Doug Ledford

IB/cma: IBoE (RoCE) IP-based GID addressing

2014-01-18T22:12:35Z

Currently, the IB core and specifically the RDMA-CM assumes that IBoE (RoCE) gids encode related Ethernet netdevice interface MAC address and possibly VLAN id. Change GIDs to be treated as they encode interface IP address. Since Ethernet layer 2 address parameters are not longer encoded within gids, we have to extend the Infiniband address structures (e.g. ib_ah_attr) with layer 2 address parameters, namely mac and vlan. Signed-off-by: Moni Shoua Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

IB/core: Ethernet L2 attributes in verbs/cm structures

2014-01-14T22:20:54Z

This patch add the support for Ethernet L2 attributes in the verbs/cm/cma structures. When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority in a similar manner that the IB L2 (and the L4 PKEY) attributes are used. Thus, those attributes were added to the following structures: * ib_ah_attr - added dmac * ib_qp_attr - added smac and vlan_id, (sl remains vlan priority) * ib_wc - added smac, vlan_id * ib_sa_path_rec - added smac, dmac, vlan_id * cm_av - added smac and vlan_id For the path record structure, extra care was taken to avoid the new fields when packing it into wire format, so we don't break the IB CM and SA wire protocol. On the active side, the CM fills. its internal structures from the path provided by the ULP. We add there taking the ETH L2 attributes and placing them into the CM Address Handle (struct cm_av). On the passive side, the CM fills its internal structures from the WC associated with the REQ message. We add there taking the ETH L2 attributes from the WC. When the HW driver provides the required ETH L2 attributes in the WC, they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core code checks for the presence of these flags, and in their absence does address resolution from the ib_init_ah_from_wc() helper function. ib_modify_qp_is_ok is also updated to consider the link layer. Some parameters are mandatory for Ethernet link layer, while they are irrelevant for IB. Vendor drivers are modified to support the new function signature. Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

IB/addr: Add AF_IB support to ip_addr_size

2013-06-20T20:08:02Z

Add support for AF_IB to ip_addr_size, and rename the function to account for the change. Give the compiler more control over whether the call should be inline or not by moving the definition into the .c file, removing the static inline, and exporting it. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier

rdma/core: Fix sparse warnings

2012-01-04T17:17:45Z

Clean up sparse warnings in the rdma core layer. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier

net: consolidate and fix ethtool_ops->get_settings calling

2011-09-15T21:32:26Z

This patch does several things: - introduces __ethtool_get_settings which is called from ethtool code and from drivers as well. Put ASSERT_RTNL there. - dev_ethtool_get_settings() is replaced by __ethtool_get_settings() - changes calling in drivers so rtnl locking is respected. In iboe_get_rate was previously ->get_settings() called unlocked. This fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same problem. Also fixed by calling __dev_get_by_index() instead of dev_get_by_index() and holding rtnl_lock for both calls. - introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create() so bnx2fc_if_create() and fcoe_if_create() are called locked as they are from other places. - use __ethtool_get_settings() in bonding code Signed-off-by: Jiri Pirko v2->v3: -removed dev_ethtool_get_settings() -added ASSERT_RTNL into __ethtool_get_settings() -prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock around it and __ethtool_get_settings() call v1->v2: add missing export_symbol Reviewed-by: Ben Hutchings [except FCoE bits] Acked-by: Ralf Baechle Signed-off-by: David S. Miller

ethtool: Call ethtool's get/set_settings callbacks with cleaned data

2011-04-29T21:01:30Z

This makes sure that when a driver calls the ethtool's get/set_settings() callback of another driver, the data passed to it is clean. This guarantees that speed_hi will be zeroed correctly if the called callback doesn't explicitely set it: we are sure we don't get a corrupted speed from the underlying driver. We also take care of setting the cmd field appropriately (ETHTOOL_GSET/SSET). This applies to dev_ethtool_get_settings(), which now makes sure it sets up that ethtool command parameter correctly before passing it to drivers. This also means that whoever calls dev_ethtool_get_settings() does not have to clean the ethtool command parameter. This function also becomes an exported symbol instead of an inline. All drivers visible to make allyesconfig under x86_64 have been updated. Signed-off-by: David Decotigny Signed-off-by: David S. Miller

IB/core: Add VLAN support for IBoE

2010-10-25T17:20:39Z

Add 802.1q VLAN support to IBoE. The VLAN tag is encoded within the GID derived from a link local address in the following way: GID[11] GID[12] contain the VLAN ID when the GID contains a VLAN. The 3 bits user priority field of the packets are identical to the 3 bits of the SL. In case of rdma_cm apps, the TOS field is used to generate the SL field by doing a shift right of 5 bits effectively taking to 3 MS bits of the TOS field. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier