kernel/include/rdma/ib_addr.h, branch linux-3.17.y

IB/cma: IBoE (RoCE) IP-based GID addressing

2014-01-18T22:12:35Z

Currently, the IB core and specifically the RDMA-CM assumes that IBoE (RoCE) gids encode related Ethernet netdevice interface MAC address and possibly VLAN id. Change GIDs to be treated as they encode interface IP address. Since Ethernet layer 2 address parameters are not longer encoded within gids, we have to extend the Infiniband address structures (e.g. ib_ah_attr) with layer 2 address parameters, namely mac and vlan. Signed-off-by: Moni Shoua Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

IB/core: Ethernet L2 attributes in verbs/cm structures

2014-01-14T22:20:54Z

This patch add the support for Ethernet L2 attributes in the verbs/cm/cma structures. When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority in a similar manner that the IB L2 (and the L4 PKEY) attributes are used. Thus, those attributes were added to the following structures: * ib_ah_attr - added dmac * ib_qp_attr - added smac and vlan_id, (sl remains vlan priority) * ib_wc - added smac, vlan_id * ib_sa_path_rec - added smac, dmac, vlan_id * cm_av - added smac and vlan_id For the path record structure, extra care was taken to avoid the new fields when packing it into wire format, so we don't break the IB CM and SA wire protocol. On the active side, the CM fills. its internal structures from the path provided by the ULP. We add there taking the ETH L2 attributes and placing them into the CM Address Handle (struct cm_av). On the passive side, the CM fills its internal structures from the WC associated with the REQ message. We add there taking the ETH L2 attributes from the WC. When the HW driver provides the required ETH L2 attributes in the WC, they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core code checks for the presence of these flags, and in their absence does address resolution from the ib_init_ah_from_wc() helper function. ib_modify_qp_is_ok is also updated to consider the link layer. Some parameters are mandatory for Ethernet link layer, while they are irrelevant for IB. Vendor drivers are modified to support the new function signature. Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

IB/addr: Add AF_IB support to ip_addr_size

2013-06-20T20:08:02Z

Add support for AF_IB to ip_addr_size, and rename the function to account for the change. Give the compiler more control over whether the call should be inline or not by moving the definition into the .c file, removing the static inline, and exporting it. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier

rdma/core: Fix sparse warnings

2012-01-04T17:17:45Z

Clean up sparse warnings in the rdma core layer. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier

net: consolidate and fix ethtool_ops->get_settings calling

2011-09-15T21:32:26Z

This patch does several things: - introduces __ethtool_get_settings which is called from ethtool code and from drivers as well. Put ASSERT_RTNL there. - dev_ethtool_get_settings() is replaced by __ethtool_get_settings() - changes calling in drivers so rtnl locking is respected. In iboe_get_rate was previously ->get_settings() called unlocked. This fixes it. Also prb_calc_retire_blk_tmo() in af_packet.c had the same problem. Also fixed by calling __dev_get_by_index() instead of dev_get_by_index() and holding rtnl_lock for both calls. - introduces rtnl_lock in bnx2fc_vport_create() and fcoe_vport_create() so bnx2fc_if_create() and fcoe_if_create() are called locked as they are from other places. - use __ethtool_get_settings() in bonding code Signed-off-by: Jiri Pirko v2->v3: -removed dev_ethtool_get_settings() -added ASSERT_RTNL into __ethtool_get_settings() -prb_calc_retire_blk_tmo - use __dev_get_by_index() and lock around it and __ethtool_get_settings() call v1->v2: add missing export_symbol Reviewed-by: Ben Hutchings [except FCoE bits] Acked-by: Ralf Baechle Signed-off-by: David S. Miller

ethtool: Call ethtool's get/set_settings callbacks with cleaned data

2011-04-29T21:01:30Z

This makes sure that when a driver calls the ethtool's get/set_settings() callback of another driver, the data passed to it is clean. This guarantees that speed_hi will be zeroed correctly if the called callback doesn't explicitely set it: we are sure we don't get a corrupted speed from the underlying driver. We also take care of setting the cmd field appropriately (ETHTOOL_GSET/SSET). This applies to dev_ethtool_get_settings(), which now makes sure it sets up that ethtool command parameter correctly before passing it to drivers. This also means that whoever calls dev_ethtool_get_settings() does not have to clean the ethtool command parameter. This function also becomes an exported symbol instead of an inline. All drivers visible to make allyesconfig under x86_64 have been updated. Signed-off-by: David Decotigny Signed-off-by: David S. Miller

IB/core: Add VLAN support for IBoE

2010-10-25T17:20:39Z

Add 802.1q VLAN support to IBoE. The VLAN tag is encoded within the GID derived from a link local address in the following way: GID[11] GID[12] contain the VLAN ID when the GID contains a VLAN. The 3 bits user priority field of the packets are identical to the 3 bits of the SL. In case of rdma_cm apps, the TOS field is used to generate the SL field by doing a shift right of 5 bits effectively taking to 3 MS bits of the TOS field. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier

RDMA/cm: Add RDMA CM support for IBoE devices

2010-10-13T22:46:43Z

Add support for IBoE device binding and IP --> GID resolution. Path resolving and multicast joining are implemented within cma.c by filling in the responses and running callbacks in the CMA work queue. IP --> GID resolution always yields IPv6 link local addresses; remote GIDs are derived from the destination MAC address of the remote port. Multicast GIDs are always mapped to multicast MACs as is done in IPv6. (IPv4 multicast is enabled by translating IPv4 multicast addresses to IPv6 multicast as described in .) Some helper functions are added to ib_addr.h. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier

RDMA/cm: fix loopback address support

2009-11-19T21:26:06Z

The RDMA CM is intended to support the use of a loopback address when establishing a connection; however, the behavior of the CM when loopback addresses are used is confusing and does not always work, depending on whether loopback was specified by the server, the client, or both. The defined behavior of rdma_bind_addr is to associate an RDMA device with an rdma_cm_id, as long as the user specified a non- zero address. (ie they weren't just trying to reserve a port) Currently, if the loopback address is passed to rdam_bind_addr, no device is associated with the rdma_cm_id. Fix this. If a loopback address is specified by the client as the destination address for a connection, it will fail to establish a connection. This is true even if the server is listing across all addresses or on the loopback address itself. The issue is that the server tries to translate the IP address carried in the REQ message to a local net_device address, which fails. The translation is not needed in this case, since the REQ carries the actual HW address that should be used. Finally, cleanup loopback support to be more transport neutral. Replace separate calls to get/set the sgid and dgid from the device address to a single call that behaves correctly depending on the format of the device address. And support both IPv4 and IPv6 address formats. Signed-off-by: Sean Hefty [ Fixed RDS build by s/ib_addr_get/rdma_addr_get/ - Roland ] Signed-off-by: Roland Dreier

IB/addr: Store net_device type instead of translating to RDMA transport

2009-11-19T20:57:18Z

The struct rdma_dev_addr stores net_device address information: the source device address, destination hardware address, and broadcast address. For consistency, store the net_device type rather than converting it to the rdma_node_type. The type indicates the format of the various hardware addresses, which is what we're concerned with, and not the RDMA node type that the address may map to. Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier