kernel/include/net, branch linux-6.14.y

espintcp: remove encap socket caching to avoid reference leak

2025-05-29T09:13:55Z

[ Upstream commit 028363685bd0b7a19b4a820f82dd905b1dc83999 ] The current scheme for caching the encap socket can lead to reference leaks when we try to delete the netns. The reference chain is: xfrm_state -> enacp_sk -> netns Since the encap socket is a userspace socket, it holds a reference on the netns. If we delete the espintcp state (through flush or individual delete) before removing the netns, the reference on the socket is dropped and the netns is correctly deleted. Otherwise, the netns may not be reachable anymore (if all processes within the ns have terminated), so we cannot delete the xfrm state to drop its reference on the socket. This patch results in a small (~2% in my tests) performance regression. A GC-type mechanism could be added for the socket cache, to clear references if the state hasn't been used "recently", but it's a lot more complex than just not caching the socket. Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)") Signed-off-by: Sabrina Dubroca Reviewed-by: Simon Horman Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

wifi: mac80211: Drop cooked monitor support

2025-05-29T09:13:32Z

[ Upstream commit 286e696770654d79b34bd15953e7101a1c4784c7 ] Hostapd switched from cooked monitor interfaces to nl80211 Dec 2011. Drop support for the outdated cooked monitor interfaces and fix creating the virtual monitor interfaces in the following cases: 1) We have one non-monitor and one monitor interface with %MONITOR_FLAG_ACTIVE enabled and then delete the non-monitor interface. 2) We only have monitor interfaces enabled on resume while at least one has %MONITOR_FLAG_ACTIVE set. Signed-off-by: Alexander Wetzel Link: https://patch.msgid.link/20250204111352.7004-2-Alexander@wetzel-home.de Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: mac80211: set ieee80211_prep_tx_info::link_id upon Auth Rx

2025-05-29T09:13:32Z

[ Upstream commit 8c60179b64434894eac1ffab7396bac131bc8b6e ] This will be used by the low level driver. Note that link_id will be 0 in case of a non-MLO authentication. Also fix a call-site of mgd_prepare_tx() where the link_id was not populated. Update the documentation to reflect the current state ieee80211_prep_tx_info::link_id is also available in mgd_complete_tx(). Signed-off-by: Emmanuel Grumbach Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20250205110958.6a590f189ce5.I1fc5c0da26b143f5b07191eb592f01f7083d55ae@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: cfg80211: allow IR in 20 MHz configurations

2025-05-29T09:12:48Z

[ Upstream commit cf4bd1608882792d4742e27a819493312904a680 ] Some regulatory bodies doesn't allow IR (initiate radioation) on a specific subband, but allows it for channels with a bandwidth of 20 MHz. Add a channel flag that indicates that, and consider it in cfg80211_reg_check_beaconing. While on it, fix the kernel doc of enum nl80211_reg_rule_flags and change it to use BIT(). Signed-off-by: Anjaneyulu Co-developed-by: Somashekhar Puttagangaiah Signed-off-by: Somashekhar Puttagangaiah Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20250308225541.d3ab352a73ff.I8a8f79e1c9eb74936929463960ee2a324712fe51@changeid [fix typo] Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: cfg80211: Update the link address when a link is added

2025-05-29T09:12:48Z

[ Upstream commit e16caea70610ed4226034dfcdaa5c43b36ff9e0a ] When links are added, update the wireless device link addresses based on the information provided by the driver. Signed-off-by: Ilan Peer Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20250308225541.d694a9125aba.I79b010ea9aab47893e4f22c266362fde30b7f9ac@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

net_sched: Flush gso_skb list too during ->change()

2025-05-22T12:31:42Z

[ Upstream commit 2d3cbfd6d54a2c39ce3244f33f85c595844bd7b8 ] Previously, when reducing a qdisc's limit via the ->change() operation, only the main skb queue was trimmed, potentially leaving packets in the gso_skb list. This could result in NULL pointer dereference when we only check sch->limit against sch->q.qlen. This patch introduces a new helper, qdisc_dequeue_internal(), which ensures both the gso_skb list and the main queue are properly flushed when trimming excess packets. All relevant qdiscs (codel, fq, fq_codel, fq_pie, hhf, pie) are updated to use this helper in their ->change() routines. Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM") Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM") Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler") Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler") Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc") Fixes: d4b36210c2e6 ("net: pkt_sched: PIE AQM scheme") Reported-by: Will Reported-by: Savy Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: export a helper for adding up queue stats

2025-05-18T06:25:59Z

[ Upstream commit 23fa6a23d97182d36ca3c71e43c804fa91e46a03 ] Older drivers and drivers with lower queue counts often have a static array of queues, rather than allocating structs for each queue on demand. Add a helper for adding up qstats from a queue range. Expectation is that driver will pass a queue range [netdev->real_num_*x_queues, MAX). It was tempting to always use num_*x_queues as the end, but virtio seems to clamp its queue count after allocating the netdev. And this way we can trivaly reuse the helper for [0, real_..). Signed-off-by: Jakub Kicinski Link: https://patch.msgid.link/20250507003221.823267-2-kuba@kernel.org Signed-off-by: Paolo Abeni Stable-dep-of: 001160ec8c59 ("virtio-net: fix total qstat values") Signed-off-by: Sasha Levin

Bluetooth: hci_conn: Fix not setting timeout for BIG Create Sync

2025-05-09T07:55:55Z

[ Upstream commit 024421cf39923927ab2b5fe895d1d922b9abe67f ] BIG Create Sync requires the command to just generates a status so this makes use of __hci_cmd_sync_status_sk to wait for HCI_EVT_LE_BIG_SYNC_ESTABLISHED, also because of this chance it is not longer necessary to use a custom method to serialize the process of creating the BIG sync since the cmd_work_sync itself ensures only one command would be pending which now awaits for HCI_EVT_LE_BIG_SYNC_ESTABLISHED before proceeding to next connection. Fixes: 42ecf1947135 ("Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver

2025-05-09T07:55:54Z

[ Upstream commit 6d0417e4e1cf66fd917f06f0454958362714ef7d ] Broadcast Receiver requires creating PA sync but the command just generates a status so this makes use of __hci_cmd_sync_status_sk to wait for HCI_EV_LE_PA_SYNC_ESTABLISHED, also because of this chance it is not longer necessary to use a custom method to serialize the process of creating the PA sync since the cmd_work_sync itself ensures only one command would be pending which now awaits for HCI_EV_LE_PA_SYNC_ESTABLISHED before proceeding to next connection. Fixes: 4a5e0ba68676 ("Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

xsk: Fix offset calculation in unaligned mode

2025-05-09T07:55:53Z

[ Upstream commit bf20af07909925ec0ae6cd4f3b7be0279dfa8768 ] Bring back previous offset calculation behaviour in AF_XDP unaligned umem mode. In unaligned mode, upper 16 bits should contain data offset, lower 48 bits should contain only specific chunk location without offset. Remove pool->headroom duplication into 48bit address. Signed-off-by: Eryk Kubanski Fixes: bea14124bacb ("xsk: Get rid of xdp_buff_xsk::orig_addr") Acked-by: Magnus Karlsson Link: https://patch.msgid.link/20250416112925.7501-1-e.kubanski@partner.samsung.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin