kernel/include/net, branch linux-5.17.y

xsk: Fix possible crash when multiple sockets are created

2022-06-14T16:41:54Z

commit ba3beec2ec1d3b4fd8672ca6e781dac4b3267f6e upstream. Fix a crash that happens if an Rx only socket is created first, then a second socket is created that is Tx only and bound to the same umem as the first socket and also the same netdev and queue_id together with the XDP_SHARED_UMEM flag. In this specific case, the tx_descs array page pool was not created by the first socket as it was an Rx only socket. When the second socket is bound it needs this tx_descs array of this shared page pool as it has a Tx component, but unfortunately it was never allocated, leading to a crash. Note that this array is only used for zero-copy drivers using the batched Tx APIs, currently only ice and i40e. [ 5511.150360] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 5511.158419] #PF: supervisor write access in kernel mode [ 5511.164472] #PF: error_code(0x0002) - not-present page [ 5511.170416] PGD 0 P4D 0 [ 5511.173347] Oops: 0002 [#1] PREEMPT SMP PTI [ 5511.178186] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G E 5.18.0-rc1+ #97 [ 5511.187245] Hardware name: Intel Corp. GRANTLEY/GRANTLEY, BIOS GRRFCRB1.86B.0276.D07.1605190235 05/19/2016 [ 5511.198418] RIP: 0010:xsk_tx_peek_release_desc_batch+0x198/0x310 [ 5511.205375] Code: c0 83 c6 01 84 c2 74 6d 8d 46 ff 23 07 44 89 e1 48 83 c0 14 48 c1 e1 04 48 c1 e0 04 48 03 47 10 4c 01 c1 48 8b 50 08 48 8b 00 <48> 89 51 08 48 89 01 41 80 bd d7 00 00 00 00 75 82 48 8b 19 49 8b [ 5511.227091] RSP: 0018:ffffc90000003dd0 EFLAGS: 00010246 [ 5511.233135] RAX: 0000000000000000 RBX: ffff88810c8da600 RCX: 0000000000000000 [ 5511.241384] RDX: 000000000000003c RSI: 0000000000000001 RDI: ffff888115f555c0 [ 5511.249634] RBP: ffffc90000003e08 R08: 0000000000000000 R09: ffff889092296b48 [ 5511.257886] R10: 0000ffffffffffff R11: ffff889092296800 R12: 0000000000000000 [ 5511.266138] R13: ffff88810c8db500 R14: 0000000000000040 R15: 0000000000000100 [ 5511.274387] FS: 0000000000000000(0000) GS:ffff88903f800000(0000) knlGS:0000000000000000 [ 5511.283746] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5511.290389] CR2: 0000000000000008 CR3: 00000001046e2001 CR4: 00000000003706f0 [ 5511.298640] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5511.306892] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5511.315142] Call Trace: [ 5511.317972] [ 5511.320301] ice_xmit_zc+0x68/0x2f0 [ice] [ 5511.324977] ? ktime_get+0x38/0xa0 [ 5511.328913] ice_napi_poll+0x7a/0x6a0 [ice] [ 5511.333784] __napi_poll+0x2c/0x160 [ 5511.337821] net_rx_action+0xdd/0x200 [ 5511.342058] __do_softirq+0xe6/0x2dd [ 5511.346198] irq_exit_rcu+0xb5/0x100 [ 5511.350339] common_interrupt+0xa4/0xc0 [ 5511.354777] [ 5511.357201] [ 5511.359625] asm_common_interrupt+0x1e/0x40 [ 5511.364466] RIP: 0010:cpuidle_enter_state+0xd2/0x360 [ 5511.370211] Code: 49 89 c5 0f 1f 44 00 00 31 ff e8 e9 00 7b ff 45 84 ff 74 12 9c 58 f6 c4 02 0f 85 72 02 00 00 31 ff e8 02 0c 80 ff fb 45 85 f6 <0f> 88 11 01 00 00 49 63 c6 4c 2b 2c 24 48 8d 14 40 48 8d 14 90 49 [ 5511.391921] RSP: 0018:ffffffff82a03e60 EFLAGS: 00000202 [ 5511.397962] RAX: ffff88903f800000 RBX: 0000000000000001 RCX: 000000000000001f [ 5511.406214] RDX: 0000000000000000 RSI: ffffffff823400b9 RDI: ffffffff8234c046 [ 5511.424646] RBP: ffff88810a384800 R08: 000005032a28c046 R09: 0000000000000008 [ 5511.443233] R10: 000000000000000b R11: 0000000000000006 R12: ffffffff82bcf700 [ 5511.461922] R13: 000005032a28c046 R14: 0000000000000001 R15: 0000000000000000 [ 5511.480300] cpuidle_enter+0x29/0x40 [ 5511.494329] do_idle+0x1c7/0x250 [ 5511.507610] cpu_startup_entry+0x19/0x20 [ 5511.521394] start_kernel+0x649/0x66e [ 5511.534626] secondary_startup_64_no_verify+0xc3/0xcb [ 5511.549230] Detect such case during bind() and allocate this memory region via newly introduced xp_alloc_tx_descs(). Also, use kvcalloc instead of kcalloc as for other buffer pool allocations, so that it matches the kvfree() from xp_destroy(). Fixes: d1bc532e99be ("i40e: xsk: Move tmp desc array from driver to pool") Signed-off-by: Maciej Fijalkowski Signed-off-by: Daniel Borkmann Acked-by: Magnus Karlsson Link: https://lore.kernel.org/bpf/20220425153745.481322-1-maciej.fijalkowski@intel.com Signed-off-by: Greg Kroah-Hartman

i40e: xsk: Move tmp desc array from driver to pool

2022-06-14T16:41:31Z

[ Upstream commit d1bc532e99becf104635ed4da6fefa306f452321 ] Move desc_array from the driver to the pool. The reason behind this is that we can then reuse this array as a temporary storage for descriptors in all zero-copy drivers that use the batched interface. This will make it easier to add batching to more drivers. i40e is the only driver that has a batched Tx zero-copy implementation, so no need to touch any other driver. Signed-off-by: Magnus Karlsson Signed-off-by: Daniel Borkmann Reviewed-by: Alexander Lobakin Link: https://lore.kernel.org/bpf/20220125160446.78976-6-maciej.fijalkowski@intel.com Signed-off-by: Sasha Levin

netfilter: nf_tables: bail out early if hardware offload is not supported

2022-06-14T16:41:30Z

[ Upstream commit 3a41c64d9c1185a2f3a184015e2a9b78bfc99c71 ] If user requests for NFT_CHAIN_HW_OFFLOAD, then check if either device provides the .ndo_setup_tc interface or there is an indirect flow block that has been registered. Otherwise, bail out early from the preparation phase. Moreover, validate that family == NFPROTO_NETDEV and hook is NF_NETDEV_INGRESS. Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

netfilter: nf_tables: delete flowtable hooks via transaction list

2022-06-14T16:41:29Z

[ Upstream commit b6d9014a3335194590abdd2a2471ef5147a67645 ] Remove inactive bool field in nft_hook object that was introduced in abadb2f865d7 ("netfilter: nf_tables: delete devices from flowtable"). Move stale flowtable hooks to transaction list instead. Deleting twice the same device does not result in ENOENT. Fixes: abadb2f865d7 ("netfilter: nf_tables: delete devices from flowtable") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

bluetooth: don't use bitmaps for random flag accesses

2022-06-14T16:41:26Z

[ Upstream commit e1cff7002b716bd0b5f5f4afd4273c99aa8644be ] The bluetooth code uses our bitmap infrastructure for the two bits (!) of connection setup flags, and in the process causes odd problems when it converts between a bitmap and just the regular values of said bits. It's completely pointless to do things like bitmap_to_arr32() to convert a bitmap into a u32. It shoudln't have been a bitmap in the first place. The reason to use bitmaps is if you have arbitrary number of bits you want to manage (not two!), or if you rely on the atomicity guarantees of the bitmap setting and clearing. The code could use an "atomic_t" and use "atomic_or/andnot()" to set and clear the bit values, but considering that it then copies the bitmaps around with "bitmap_to_arr32()" and friends, there clearly cannot be a lot of atomicity requirements. So just use a regular integer. In the process, this avoids the warnings about erroneous use of bitmap_from_u64() which were triggered on 32-bit architectures when conversion from a u64 would access two words (and, surprise, surprise, only one word is needed - and indeed overkill - for a 2-bit bitmap). That was always problematic, but the compiler seems to notice it and warn about the invalid pattern only after commit 0a97953fd221 ("lib: add bitmap_{from,to}_arr64") changed the exact implementation details of 'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell. Fixes: fe92ee6425a2 ("Bluetooth: hci_core: Rework hci_conn_params flags") Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/ Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/ Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/ Reported-by: Stephen Rothwell Reported-by: Sudip Mukherjee Reviewed-by: Yury Norov Cc: Luiz Augusto von Dentz Cc: Marcel Holtmann Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

ax25: Fix ax25 session cleanup problems

2022-06-14T16:41:25Z

[ Upstream commit 7d8a3a477b3e25ada8dc71d22048c2ea417209a0 ] There are session cleanup problems in ax25_release() and ax25_disconnect(). If we setup a session and then disconnect, the disconnected session is still in "LISTENING" state that is shown below. Active AX.25 sockets Dest Source Device State Vr/Vs Send-Q Recv-Q DL9SAU-4 DL9SAU-3 ??? LISTENING 000/000 0 0 DL9SAU-3 DL9SAU-4 ??? LISTENING 000/000 0 0 The first reason is caused by del_timer_sync() in ax25_release(). The timers of ax25 are used for correct session cleanup. If we use ax25_release() to close ax25 sessions and ax25_dev is not null, the del_timer_sync() functions in ax25_release() will execute. As a result, the sessions could not be cleaned up correctly, because the timers have stopped. In order to solve this problem, this patch adds a device_up flag in ax25_dev in order to judge whether the device is up. If there are sessions to be cleaned up, the del_timer_sync() in ax25_release() will not execute. What's more, we add ax25_cb_del() in ax25_kill_by_device(), because the timers have been stopped and there are no functions that could delete ax25_cb if we do not call ax25_release(). Finally, we reorder the position of ax25_list_lock in ax25_cb_del() in order to synchronize among different functions that call ax25_cb_del(). The second reason is caused by improper check in ax25_disconnect(). The incoming ax25 sessions which ax25->sk is null will close heartbeat timer, because the check "if(!ax25->sk || ..)" is satisfied. As a result, the session could not be cleaned up properly. In order to solve this problem, this patch changes the improper check to "if(ax25->sk && ..)" in ax25_disconnect(). What`s more, the ax25_disconnect() may be called twice, which is not necessary. For example, ax25_kill_by_device() calls ax25_disconnect() and sets ax25->state to AX25_STATE_0, but ax25_release() calls ax25_disconnect() again. In order to solve this problem, this patch add a check in ax25_release(). If the flag of ax25->sk equals to SOCK_DEAD, the ax25_disconnect() in ax25_release() should not be executed. Fixes: 82e31755e55f ("ax25: Fix UAF bugs in ax25 timers") Fixes: 8a367e74c012 ("ax25: Fix segfault after sock connection timeout") Reported-and-tested-by: Thomas Osterried Signed-off-by: Duoming Zhou Link: https://lore.kernel.org/r/20220530152158.108619-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: sched: add barrier to fix packet stuck problem for lockless qdisc

2022-06-14T16:41:24Z

[ Upstream commit 2e8728c955ce0624b958eee6e030a37aca3a5d86 ] In qdisc_run_end(), the spin_unlock() only has store-release semantic, which guarantees all earlier memory access are visible before it. But the subsequent test_bit() has no barrier semantics so may be reordered ahead of the spin_unlock(). The store-load reordering may cause a packet stuck problem. The concurrent operations can be described as below, CPU 0 | CPU 1 qdisc_run_end() | qdisc_run_begin() . | . ----> /* may be reorderd here */ | . | . | . | spin_unlock() | set_bit() | . | smp_mb__after_atomic() ---- test_bit() | spin_trylock() . | . Consider the following sequence of events: CPU 0 reorder test_bit() ahead and see MISSED = 0 CPU 1 calls set_bit() CPU 1 calls spin_trylock() and return fail CPU 0 executes spin_unlock() At the end of the sequence, CPU 0 calls spin_unlock() and does nothing because it see MISSED = 0. The skb on CPU 1 has beed enqueued but no one take it, until the next cpu pushing to the qdisc (if ever ...) will notice and dequeue it. This patch fix this by adding one explicit barrier. As spin_unlock() and test_bit() ordering is a store-load ordering, a full memory barrier smp_mb() is needed here. Fixes: a90c57f2cedd ("net: sched: fix packet stuck problem for lockless qdisc") Signed-off-by: Guoju Fang Link: https://lore.kernel.org/r/20220528101628.120193-1-gjfang@linux.alibaba.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

tcp: add accessors to read/set tp->snd_cwnd

2022-06-14T16:41:22Z

[ Upstream commit 40570375356c874b1578e05c1dcc3ff7c1322dbe ] We had various bugs over the years with code breaking the assumption that tp->snd_cwnd is greater than zero. Lately, syzbot reported the WARN_ON_ONCE(!tp->prior_cwnd) added in commit 8b8a321ff72c ("tcp: fix zero cwnd in tcp_cwnd_reduction") can trigger, and without a repro we would have to spend considerable time finding the bug. Instead of complaining too late, we want to catch where and when tp->snd_cwnd is set to an illegal value. Signed-off-by: Eric Dumazet Suggested-by: Yuchung Cheng Cc: Neal Cardwell Acked-by: Yuchung Cheng Link: https://lore.kernel.org/r/20220405233538.947344-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: sched: fixed barrier to prevent skbuff sticking in qdisc backlog

2022-06-14T16:41:21Z

[ Upstream commit a54ce3703613e41fe1d98060b62ec09a3984dc28 ] In qdisc_run_begin(), smp_mb__before_atomic() used before test_bit() does not provide any ordering guarantee as test_bit() is not an atomic operation. This, added to the fact that the spin_trylock() call at the beginning of qdisc_run_begin() does not guarantee acquire semantics if it does not grab the lock, makes it possible for the following statement : if (test_bit(__QDISC_STATE_MISSED, &qdisc->state)) to be executed before an enqueue operation called before qdisc_run_begin(). As a result the following race can happen : CPU 1 CPU 2 qdisc_run_begin() qdisc_run_begin() /* true */ set(MISSED) . /* returns false */ . . /* sees MISSED = 1 */ . /* so qdisc not empty */ . __qdisc_run() . . . pfifo_fast_dequeue() ----> /* may be done here */ . | . clear(MISSED) | . . | . smp_mb __after_atomic(); | . . | . /* recheck the queue */ | . /* nothing => exit */ | enqueue(skb1) | . | qdisc_run_begin() | . | spin_trylock() /* fail */ | . | smp_mb__before_atomic() /* not enough */ | . ---- if (test_bit(MISSED)) return false; /* exit */ In the above scenario, CPU 1 and CPU 2 both try to grab the qdisc->seqlock at the same time. Only CPU 2 succeeds and enters the bypass code path, where it emits its skb then calls __qdisc_run(). CPU1 fails, sets MISSED and goes down the traditionnal enqueue() + dequeue() code path. But when executing qdisc_run_begin() for the second time, after enqueuing its skbuff, it sees the MISSED bit still set (by itself) and consequently chooses to exit early without setting it again nor trying to grab the spinlock again. Meanwhile CPU2 has seen MISSED = 1, cleared it, checked the queue and found it empty, so it returned. At the end of the sequence, we end up with skb1 enqueued in the backlog, both CPUs out of __dev_xmit_skb(), the MISSED bit not set, and no __netif_schedule() called made. skb1 will now linger in the qdisc until somebody later performs a full __qdisc_run(). Associated to the bypass capacity of the qdisc, and the ability of the TCP layer to avoid resending packets which it knows are still in the qdisc, this can lead to serious traffic "holes" in a TCP connection. We fix this by replacing the smp_mb__before_atomic() / test_bit() / set_bit() / smp_mb__after_atomic() sequence inside qdisc_run_begin() by a single test_and_set_bit() call, which is more concise and enforces the needed memory barriers. Fixes: 89837eb4b246 ("net: sched: add barrier to ensure correct ordering for lockless qdisc") Signed-off-by: Vincent Ray Signed-off-by: Eric Dumazet Link: https://lore.kernel.org/r/20220526001746.2437669-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted

2022-06-09T08:25:58Z

[ Upstream commit 9b3628d79b46f06157affc56fdb218fdd4988321 ] This attempts to cleanup the hci_conn if it cannot be aborted as otherwise it would likely result in having the controller and host stack out of sync with respect to connection handle. Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin