kernel/include/net/xfrm.h, branch linux-4.1.y

xfrm: fix stack access out of bounds with CONFIG_XFRM_SUB_POLICY

2017-07-31T17:37:51Z

[ Upstream commit 9b3eb54106cf6acd03f07cf0ab01c13676a226c2 ] When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for that dst. Unfortunately, the code that allocates and fills this copy doesn't care about what type of flowi (flowi, flowi4, flowi6) gets passed. In multiple code paths (from raw_sendmsg, from TCP when replying to a FIN, in vxlan, geneve, and gre), the flowi that gets passed to xfrm is actually an on-stack flowi4, so we end up reading stuff from the stack past the end of the flowi4 struct. Since xfrm_dst->origin isn't used anywhere following commit ca116922afa8 ("xfrm: Eliminate "fl" and "pol" args to xfrm_bundle_ok()."), just get rid of it. xfrm_dst->partner isn't used either, so get rid of that too. Fixes: 9d6ec938019c ("ipv4: Use flowi4 in public route lookup interfaces.") Signed-off-by: Sabrina Dubroca Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

netfilter: Pass socket pointer down through okfn().

2015-04-07T19:25:55Z

On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller

xfrm: simplify xfrm_address_t use

2015-03-31T17:58:35Z

In many places, the a6 field is typecasted to struct in6_addr. As the fields are in union anyway, just add in6_addr type to the union and get rid of the typecasting. Modifying the uapi header is okay, the union has still the same size. Signed-off-by: Jiri Benc Signed-off-by: David S. Miller

net: Introduce possible_net_t

2015-03-12T18:39:40Z

Having to say > #ifdef CONFIG_NET_NS > struct net *net; > #endif in structures is a little bit wordy and a little bit error prone. Instead it is possible to say: > typedef struct { > #ifdef CONFIG_NET_NS > struct net *net; > #endif > } possible_net_t; And then in a header say: > possible_net_t net; Which is cleaner and easier to use and easier to test, as the possible_net_t is always there no matter what the compile options. Further this allows read_pnet and write_pnet to be functions in all cases which is better at catching typos. This change adds possible_net_t, updates the definitions of read_pnet and write_pnet, updates optional struct net * variables that write_pnet uses on to have the type possible_net_t, and finally fixes up the b0rked users of read_pnet and write_pnet. Signed-off-by: "Eric W. Biederman" Acked-by: Eric Dumazet Signed-off-by: David S. Miller

xfrm: configure policy hash table thresholds by netlink

2014-09-02T11:37:56Z

Enable to specify local and remote prefix length thresholds for the policy hash table via a netlink XFRM_MSG_NEWSPDINFO message. prefix length thresholds are specified by XFRMA_SPD_IPV4_HTHRESH and XFRMA_SPD_IPV6_HTHRESH optional attributes (struct xfrmu_spdhthresh). example: struct xfrmu_spdhthresh thresh4 = { .lbits = 0; .rbits = 24; }; struct xfrmu_spdhthresh thresh6 = { .lbits = 0; .rbits = 56; }; struct nlmsghdr *hdr; struct nl_msg *msg; msg = nlmsg_alloc(); hdr = nlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, XFRMA_SPD_IPV4_HTHRESH, sizeof(__u32), NLM_F_REQUEST); nla_put(msg, XFRMA_SPD_IPV4_HTHRESH, sizeof(thresh4), &thresh4); nla_put(msg, XFRMA_SPD_IPV6_HTHRESH, sizeof(thresh6), &thresh6); nla_send_auto(sk, msg); The numbers are the policy selector minimum prefix lengths to put a policy in the hash table. - lbits is the local threshold (source address for out policies, destination address for in and fwd policies). - rbits is the remote threshold (destination address for out policies, source address for in and fwd policies). The default values are: XFRMA_SPD_IPV4_HTHRESH: 32 32 XFRMA_SPD_IPV6_HTHRESH: 128 128 Dynamic re-building of the SPD is performed when the thresholds values are changed. The current thresholds can be read via a XFRM_MSG_GETSPDINFO request: the kernel replies to XFRM_MSG_GETSPDINFO requests by an XFRM_MSG_NEWSPDINFO message, with both attributes XFRMA_SPD_IPV4_HTHRESH and XFRMA_SPD_IPV6_HTHRESH. Signed-off-by: Christophe Gouault Signed-off-by: Steffen Klassert

xfrm: Remove useless xfrm_audit struct.

2014-04-23T06:21:04Z

Commit f1370cc4 "xfrm: Remove useless secid field from xfrm_audit." changed "struct xfrm_audit" to have either { audit_get_loginuid(current) / audit_get_sessionid(current) } or { INVALID_UID / -1 } pair. This means that we can represent "struct xfrm_audit" as "bool". This patch replaces "struct xfrm_audit" argument with "bool". Signed-off-by: Tetsuo Handa Signed-off-by: Steffen Klassert

xfrm: Remove useless secid field from xfrm_audit.

2014-04-22T08:47:53Z

It seems to me that commit ab5f5e8b "[XFRM]: xfrm audit calls" is doing something strange at xfrm_audit_helper_usrinfo(). If secid != 0 && security_secid_to_secctx(secid) != 0, the caller calls audit_log_task_context() which basically does secid != 0 && security_secid_to_secctx(secid) == 0 case except that secid is obtained from current thread's context. Oh, what happens if secid passed to xfrm_audit_helper_usrinfo() was obtained from other thread's context? It might audit current thread's context rather than other thread's context if security_secid_to_secctx() in xfrm_audit_helper_usrinfo() failed for some reason. Then, are all the caller of xfrm_audit_helper_usrinfo() passing either secid obtained from current thread's context or secid == 0? It seems to me that they are. If I didn't miss something, we don't need to pass secid to xfrm_audit_helper_usrinfo() because audit_log_task_context() will obtain secid from current thread's context. Signed-off-by: Tetsuo Handa Signed-off-by: Steffen Klassert

ipv4: add a sock pointer to dst->output() path.

2014-04-15T17:47:15Z

In the dst->output() path for ipv4, the code assumes the skb it has to transmit is attached to an inet socket, specifically via ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the provider of the packet is an AF_PACKET socket. The dst->output() method gets an additional 'struct sock *sk' parameter. This needs a cascade of changes so that this parameter can be propagated from vxlan to final consumer. Fixes: 8f646c922d55 ("vxlan: keep original skb ownership") Reported-by: lucien xin Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next

2014-03-18T18:09:07Z

Steffen Klassert says: ==================== One patch to rename a newly introduced struct. The rest is the rework of the IPsec virtual tunnel interface for ipv6 to support inter address family tunneling and namespace crossing. 1) Rename the newly introduced struct xfrm_filter to avoid a conflict with iproute2. From Nicolas Dichtel. 2) Introduce xfrm_input_afinfo to access the address family dependent tunnel callback functions properly. 3) Add and use a IPsec protocol multiplexer for ipv6. 4) Remove dst_entry caching. vti can lookup multiple different dst entries, dependent of the configured xfrm states. Therefore it does not make to cache a dst_entry. 5) Remove caching of flow informations. vti6 does not use the the tunnel endpoint addresses to do route and xfrm lookups. 6) Update the vti6 to use its own receive hook. 7) Remove the now unused xfrm_tunnel_notifier. This was used from vti and is replaced by the IPsec protocol multiplexer hooks. 8) Support inter address family tunneling for vti6. 9) Check if the tunnel endpoints of the xfrm state and the vti interface are matching and return an error otherwise. 10) Enable namespace crossing for vti devices. ==================== Signed-off-by: David S. Miller

xfrm6: Remove xfrm_tunnel_notifier

2014-03-14T06:28:08Z

This was used from vti and is replaced by the IPsec protocol multiplexer hooks. It is now unused, so remove it. Signed-off-by: Steffen Klassert