kernel/include/net/udp_tunnel.h, branch linux-5.11.y

udp_tunnel: add the ability to share port tables

2020-09-28T19:50:12Z

Unfortunately recent Intel NIC designs share the UDP port table across netdevs. So far the UDP tunnel port state was maintained per netdev, we need to extend that to cater to Intel NICs. Expect NICs to allocate the info structure dynamically and link to the state from there. All the shared NICs will record port offload information in the one instance of the table so we need to make sure that the use count can accommodate larger numbers. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

udp_tunnel: add the ability to hard-code IANA VXLAN

2020-08-03T17:13:54Z

mlx5 has the IANA VXLAN port (4789) hard coded by the device, instead of being added dynamically when tunnels are created. To support this add a workaround flag to struct udp_tunnel_nic_info. Skipping updates for the port is fairly trivial, dumping the hard coded port via ethtool requires some code duplication. The port is not a part of any real table, we dump it in a special table which has no tunnel types supported and only one entry. This is the last known workaround / hack needed to convert all drivers to the new infra. Signed-off-by: Jakub Kicinski Signed-off-by: Saeed Mahameed

ethtool: add tunnel info interface

2020-07-10T20:54:00Z

Add an interface to report offloaded UDP ports via ethtool netlink. Now that core takes care of tracking which UDP tunnel ports the NICs are aware of we can quite easily export this information out to user space. The responsibility of writing the netlink dumps is split between ethtool code and udp_tunnel_nic.c - since udp_tunnel module may not always be loaded, yet we should always report the capabilities of the NIC. $ ethtool --show-tunnels eth0 Tunnel information for eth0: UDP port table 0: Size: 4 Types: vxlan No entries UDP port table 1: Size: 4 Types: geneve, vxlan-gpe Entries (1): port 1230, vxlan-gpe v4: - back to v2, build fix is now directly in udp_tunnel.h v3: - don't compile ETHTOOL_MSG_TUNNEL_INFO_GET in if CONFIG_INET not set. v2: - fix string set count, - reorder enums in the uAPI, - fix type of ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES to bitset in docs and comments. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

udp_tunnel: add central NIC RX port offload infrastructure

2020-07-10T20:54:00Z

Cater to devices which: (a) may want to sleep in the callbacks; (b) only have IPv4 support; (c) need all the programming to happen while the netdev is up. Drivers attach UDP tunnel offload info struct to their netdevs, where they declare how many UDP ports of various tunnel types they support. Core takes care of tracking which ports to offload. Use a fixed-size array since this matches what almost all drivers do, and avoids a complexity and uncertainty around memory allocations in an atomic context. Make sure that tunnel drivers don't try to replay the ports when new NIC netdev is registered. Automatic replays would mess up reference counting, and will be removed completely once all drivers are converted. v4: - use a #define NULL to avoid build issues with CONFIG_INET=n. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

udp_tunnel: re-number the offload tunnel types

2020-07-10T20:54:00Z

Make it possible to use tunnel types as flags more easily. There doesn't appear to be any user using the type as an array index, so this should make no difference. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

net: bareudp: avoid uninitialized variable warning

2020-05-08T00:28:18Z

clang points out that building without IPv6 would lead to returning an uninitialized variable if a packet with family!=AF_INET is passed into bareudp_udp_encap_recv(): drivers/net/bareudp.c:139:6: error: variable 'err' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] if (family == AF_INET) ^~~~~~~~~~~~~~~~~ drivers/net/bareudp.c:146:15: note: uninitialized use occurs here if (unlikely(err)) { ^~~ include/linux/compiler.h:78:42: note: expanded from macro 'unlikely' # define unlikely(x) __builtin_expect(!!(x), 0) ^ drivers/net/bareudp.c:139:2: note: remove the 'if' if its condition is always true if (family == AF_INET) ^~~~~~~~~~~~~~~~~~~~~~ This cannot happen in practice, so change the condition in a way that gcc sees the IPv4 case as unconditionally true here. For consistency, change all the similar constructs in this file the same way, using "if(IS_ENABLED())" instead of #if IS_ENABLED()". Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Arnd Bergmann Reviewed-by: Nathan Chancellor Signed-off-by: David S. Miller

ipv6: Move ipv6 stubs to a separate header file

2019-03-29T17:53:45Z

The number of stubs is growing and has nothing to do with addrconf. Move the definition of the stubs to a separate header file and update users. In the move, drop the vxlan specific comment before ipv6_stub. Code move only; no functional change intended. Signed-off-by: David Ahern Signed-off-by: David S. Miller

udp_tunnel: add config option to bind to a device

2018-12-03T22:15:26Z

UDP tunnel sockets are always opened unbound to a specific device. This patch allow the socket to be bound on a custom device, which incidentally makes UDP tunnels VRF-aware if binding to an l3mdev. Signed-off-by: Alexis Bauvin Reviewed-by: Amine Kherbouche Tested-by: Amine Kherbouche Signed-off-by: David S. Miller

udp: Handle ICMP errors for tunnels with same destination port on both endpoints

2018-11-09T01:13:08Z

For both IPv4 and IPv6, if we can't match errors to a socket, try tunnels before ignoring them. Look up a socket with the original source and destination ports as found in the UDP packet inside the ICMP payload, this will work for tunnels that force the same destination port for both endpoints, i.e. VXLAN and GENEVE. Actually, lwtunnels could break this assumption if they are configured by an external control plane to have different destination ports on the endpoints: in this case, we won't be able to trace ICMP messages back to them. For IPv6 redirect messages, call ip6_redirect() directly with the output interface argument set to the interface we received the packet from (as it's the very interface we should build the exception on), otherwise the new nexthop will be rejected. There's no such need for IPv4. Tunnels can now export an encap_err_lookup() operation that indicates a match. Pass the packet to the lookup function, and if the tunnel driver reports a matching association, continue with regular ICMP error handling. v2: - Added newline between network and transport header sets in __udp{4,6}_lib_err_encap() (David Miller) - Removed redundant skb_reset_network_header(skb); in __udp4_lib_err_encap() - Removed redundant reassignment of iph in __udp4_lib_err_encap() (Sabrina Dubroca) - Edited comment to __udp{4,6}_lib_err_encap() to reflect the fact this won't work with lwtunnels configured to use asymmetric ports. By the way, it's VXLAN, not VxLAN (Jiri Benc) Signed-off-by: Stefano Brivio Reviewed-by: Sabrina Dubroca Signed-off-by: David S. Miller

udp: implement complete book-keeping for encap_needed

2018-11-08T00:23:04Z

The *encap_needed static keys are enabled by UDP tunnels and several UDP encapsulations type, but they are never turned off. This can cause unneeded overall performance degradation for systems where such features are used transiently. This patch introduces complete book-keeping for such keys, decreasing the usage at socket destruction time, if needed, and avoiding that the same socket could increase the key usage multiple times. rfc v3 -> v1: - add socket lock around udp_tunnel_encap_enable() rfc v2 -> rfc v3: - use udp_tunnel_encap_enable() in setsockopt() Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller