kernel/include/net/udp_tunnel.h, branch linux-4.15.y

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

net: add infrastructure to un-offload UDP tunnel port

2017-07-24T20:52:59Z

This adds a new NETDEV_UDP_TUNNEL_DROP_INFO event, similar to NETDEV_UDP_TUNNEL_PUSH_INFO, to signal to un-offload ports. This also adds udp_tunnel_drop_rx_port(), which calls ndo_udp_tunnel_del. Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller

vxlan: Add new UDP encapsulation offload type for VXLAN-GPE

2016-06-18T03:23:32Z

The fact is VXLAN with Generic Protocol Extensions cannot be supported by the same hardware parsers that support VXLAN. The protocol extensions allow for things like a Next Protocol field which in turn allows for things other than Ethernet to be passed over the tunnel. Most existing parsers will not know how to interpret this. To resolve this I am giving VXLAN-GPE its own UDP encapsulation offload type. This way hardware that does support GPE can simply add this type to the switch statement for VXLAN, and if they don't support it then this will fix any issues where headers might be interpreted incorrectly. Signed-off-by: Alexander Duyck Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller

net: Merge VXLAN and GENEVE push notifiers into a single notifier

2016-06-18T03:23:29Z

This patch merges the notifiers for VXLAN and GENEVE into a single UDP tunnel notifier. The idea is that we will want to only have to make one notifier call to receive the list of ports for VXLAN and GENEVE tunnels that need to be offloaded. In addition we add a new set of ndo functions named ndo_udp_tunnel_add and ndo_udp_tunnel_del that are meant to allow us to track the tunnel meta-data such as port and address family as tunnels are added and removed. The tunnel meta-data is now transported in a structure named udp_tunnel_info which for now carries the type, address family, and port number. In the future this could be updated so that we can include a tuple of values including things such as the destination IP address and other fields. I also ended up going with a naming scheme that consisted of using the prefix udp_tunnel on function names. I applied this to the notifier and ndo ops as well so that it hopefully points to the fact that these are primarily used in the udp_tunnel functions. Signed-off-by: Alexander Duyck Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller

net: Combine GENEVE and VXLAN port notifiers into single functions

2016-06-18T03:23:29Z

This patch merges the GENEVE and VXLAN code so that both functions pass through a shared code path. This way we can start the effort of using a single function on the network device drivers to handle both of these tunnel types. Signed-off-by: Alexander Duyck Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller

vxlan/geneve: Include udp_tunnel.h in vxlan/geneve.h and fixup includes

2016-06-18T03:23:29Z

This patch makes it so that we add udp_tunnel.h to vxlan.h and geneve.h header files. This is useful as I plan to move the generic handlers for the port offloads into the udp_tunnel header file and leave the vxlan and geneve headers to be a bit more protocol specific. I also went through and cleaned out a number of redundant includes that where in the .h and .c files for these drivers. Signed-off-by: Alexander Duyck Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-05-09T19:59:24Z

In netdevice.h we removed the structure in net-next that is being changes in 'net'. In macsec.c and rtnetlink.c we have overlaps between fixes in 'net' and the u64 attribute changes in 'net-next'. The mlx5 conflicts have to do with vxlan support dependencies. Signed-off-by: David S. Miller

udp_tunnel: Remove redundant udp_tunnel_gro_complete().

2016-05-06T22:25:26Z

The setting of the UDP tunnel GSO type is already performed by udp[46]_gro_complete(). Signed-off-by: Jarno Rajahalme Signed-off-by: David S. Miller

ip_tunnel_core: iptunnel_handle_offloads returns int and doesn't free skb

2016-04-16T23:09:13Z

This patch updates the IP tunnel core function iptunnel_handle_offloads so that we return an int and do not free the skb inside the function. This actually allows us to clean up several paths in several tunnels so that we can free the skb at one point in the path without having to have a secondary path if we are supporting tunnel offloads. In addition it should resolve some double-free issues I have found in the tunnels paths as I believe it is possible for us to end up triggering such an event in the case of fou or gue. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller

udp: Add socket based GRO and config

2016-04-07T20:53:29Z

Add gro_receive and gro_complete to struct udp_tunnel_sock_cfg. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller