kernel/include/net/udp.h, branch linux-3.17.y

udp: Add function to make source port for UDP tunnels

2014-07-08T04:14:21Z

This patch adds udp_flow_src_port function which is intended to be a common function that UDP tunnel implementations call to set the source port. The source port is chosen so that a hash over the outer headers (IP addresses and UDP ports) acts as suitable hash for the flow of the encapsulated packet. In this manner, UDP encapsulation works with RSS and ECMP based wrt the inner flow. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller

udp: call __skb_checksum_complete when doing full checksum

2014-06-15T08:00:49Z

In __udp_lib_checksum_complete check if checksum is being done over all the data (len is equal to skb->len) and if it is call __skb_checksum_complete instead of __skb_checksum_complete_head. This allows checksum to be saved in checksum complete. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller

udp: Generic functions to set checksum

2014-06-05T05:46:38Z

Added udp_set_csum and udp6_set_csum functions to set UDP checksums in packets. These are for simple UDP packets such as those that might be created in UDP tunnels. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller

net: Split sk_no_check into sk_no_check_{rx,tx}

2014-05-23T20:28:53Z

Define separate fields in the sock structure for configuring disabling checksums in both TX and RX-- sk_no_check_tx and sk_no_check_rx. The SO_NO_CHECK socket option only affects sk_no_check_tx. Also, removed UDP_CSUM_* defines since they are no longer necessary. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller

udp: Remove unnecessary semicolon from do{}while (0) macro

2013-11-07T07:14:33Z

Just an unnecessary semicolon that should be removed... Whitespace neatening of macro too. Signed-off-by: Joe Perches Signed-off-by: David S. Miller

udp: ipv4: Add udp early demux

2013-10-08T20:27:33Z

The removal of the routing cache introduced a performance regression for some UDP workloads since a dst lookup must be done for each packet. This change caches the dst per socket in a similar manner to what we do for TCP by implementing early_demux. For UDP multicast we can only cache the dst if there is only one receiving socket on the host. Since caching only works when there is one receiving socket we do the multicast socket lookup using RCU. For UDP unicast we only demux sockets with an exact match in order to not break forwarding setups. Additionally since the hash chains may be long we only check the first socket to see if it is a match and not waste extra time searching the whole chain when we might not find an exact match. Benchmark results from a netperf UDP_RR test: Before 87961.22 transactions/s After 89789.68 transactions/s Benchmark results from a fio 1 byte UDP multicast pingpong test (Multicast one way unicast response): Before 12.97us RTT After 12.63us RTT Signed-off-by: Shawn Bohrer Signed-off-by: David S. Miller

udp.h: Remove extern from function prototypes

2013-09-23T20:29:40Z

There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches Signed-off-by: David S. Miller

pktgen: Add UDPCSUM flag to support UDP checksums

2013-07-28T05:16:36Z

UDP checksums are optional, hence pktgen has been omitting them in favour of performance. The optional flag UDPCSUM enables UDP checksumming. If the output device supports hardware checksumming the skb is prepared and marked CHECKSUM_PARTIAL, otherwise the checksum is generated in software. Signed-off-by: Thomas Graf Cc: Eric Dumazet Cc: Ben Greear Signed-off-by: David S. Miller

ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET pending data

2013-07-02T19:44:18Z

We accidentally call down to ip6_push_pending_frames when uncorking pending AF_INET data on a ipv6 socket. This results in the following splat (from Dave Jones): skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev: ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:126! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth +netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37 task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000 RIP: 0010:[] [] skb_panic+0x63/0x65 RSP: 0018:ffff8801e6431de8 EFLAGS: 00010282 RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006 RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520 RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800 R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800 FS: 00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Stack: ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0 Call Trace: [] skb_push+0x3a/0x40 [] ip6_push_pending_frames+0x1f6/0x4d0 [] ? mark_held_locks+0xbb/0x140 [] udp_v6_push_pending_frames+0x2b9/0x3d0 [] ? udplite_getfrag+0x20/0x20 [] udp_lib_setsockopt+0x1aa/0x1f0 [] ? fget_light+0x387/0x4f0 [] udpv6_setsockopt+0x34/0x40 [] sock_common_setsockopt+0x14/0x20 [] SyS_setsockopt+0x71/0xd0 [] tracesys+0xdd/0xe2 Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 RIP [] skb_panic+0x63/0x65 RSP This patch adds a check if the pending data is of address family AF_INET and directly calls udp_push_ending_frames from udp_v6_push_pending_frames if that is the case. This bug was found by Dave Jones with trinity. (Also move the initialization of fl6 below the AF_INET check, even if not strictly necessary.) Cc: Dave Jones Cc: YOSHIFUJI Hideaki Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller

net: udp4: move GSO functions to udp_offload

2013-06-12T07:47:25Z

Similarly to TCP offloading and UDPv6 offloading, move all related UDPv4 functions to udp_offload.c to make things more explicit. Also, by this, we can make those functions static. Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller