kernel/include/net/nfc/nci.h, branch linux-6.18.y

net: nfc: Propagate ISO14443 type A target ATS to userspace via netlink

2024-11-07T09:21:58Z

Add a 20-byte field ats to struct nfc_target and expose it as NFC_ATTR_TARGET_ATS via the netlink interface. The payload contains 'historical bytes' that help to distinguish cards from one another. The information is commonly used to assemble an emulated ATR similar to that reported by smart cards with contacts. Add a 20-byte field target_ats to struct nci_dev to hold the payload obtained in nci_rf_intf_activated_ntf_packet() and copy it to over to nfc_target.ats in nci_activate_target(). The approach is similar to the handling of 'general bytes' within ATR_RES. Replace the hard-coded size of rats_res within struct activation_params_nfca_poll_iso_dep by the equal constant NFC_ATS_MAXSIZE now defined in nfc.h Within NCI, the information corresponds to the 'RATS Response' activation parameter that omits the initial length byte TL. This loses no information and is consistent with our handling of SENSB_RES that also drops the first (constant) byte. Tested with nxp_nci_i2c on a few type A targets including an ICAO 9303 compliant passport. I refrain from the corresponding change to digital_in_recv_ats() to have the few drivers based on digital.h fill nfc_target.ats, as I have no way to test it. That class of drivers appear not to set NFC_ATTR_TARGET_SENSB_RES either. Consider a separate patch to propagate (all) the parameters. Signed-off-by: Juraj Šarinay Link: https://patch.msgid.link/20241103124525.8392-1-juraj@sarinay.com Signed-off-by: Paolo Abeni

NFC: Correct spelling in headers

2024-08-26T16:37:23Z

Correct spelling in NFC headers. As reported by codespell. Signed-off-by: Simon Horman Reviewed-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20240822-net-spell-v1-8-3a98971ce2d2@kernel.org Signed-off-by: Jakub Kicinski

net/nfc/nci: Support NCI 2.x initial sequence

2020-12-05T01:47:35Z

implement the NCI 2.x initial sequence to support NCI 2.x NFCC. Since NCI 2.0, CORE_RESET and CORE_INIT sequence have been changed. If NFCEE supports NCI 2.x, then NCI 2.x initial sequence will work. In NCI 1.0, Initial sequence and payloads are as below: (DH) (NFCC) | -- CORE_RESET_CMD --> | | <-- CORE_RESET_RSP -- | | -- CORE_INIT_CMD --> | | <-- CORE_INIT_RSP -- | CORE_RESET_RSP payloads are Status, NCI version, Configuration Status. CORE_INIT_CMD payloads are empty. CORE_INIT_RSP payloads are Status, NFCC Features, Number of Supported RF Interfaces, Supported RF Interface, Max Logical Connections, Max Routing table Size, Max Control Packet Payload Size, Max Size for Large Parameters, Manufacturer ID, Manufacturer Specific Information. In NCI 2.0, Initial Sequence and Parameters are as below: (DH) (NFCC) | -- CORE_RESET_CMD --> | | <-- CORE_RESET_RSP -- | | <-- CORE_RESET_NTF -- | | -- CORE_INIT_CMD --> | | <-- CORE_INIT_RSP -- | CORE_RESET_RSP payloads are Status. CORE_RESET_NTF payloads are Reset Trigger, Configuration Status, NCI Version, Manufacturer ID, Manufacturer Specific Information Length, Manufacturer Specific Information. CORE_INIT_CMD payloads are Feature1, Feature2. CORE_INIT_RSP payloads are Status, NFCC Features, Max Logical Connections, Max Routing Table Size, Max Control Packet Payload Size, Max Data Packet Payload Size of the Static HCI Connection, Number of Credits of the Static HCI Connection, Max NFC-V RF Frame Size, Number of Supported RF Interfaces, Supported RF Interfaces. Signed-off-by: Bongsu Jeon Link: https://lore.kernel.org/r/20201202223147.3472-1-bongsu.jeon@samsung.com Signed-off-by: Jakub Kicinski

NFC: Replace zero-length array with flexible-array member

2020-02-27T20:06:20Z

The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234

2019-06-19T15:09:07Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Reviewed-by: Enrico Weigelt Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman

NFC: nfcmrvl: add i2c driver

2015-10-27T03:21:14Z

This driver adds the support of I2C-based Marvell NFC controller. Signed-off-by: Vincent Cuissard Signed-off-by: Samuel Ortiz

NFC: nci: Introduce new core opcodes

2015-10-25T18:11:49Z

Add NCI_OP_CORE_GET_CONFIG_CMD, NCI_OP_CORE_GET_CONFIG_RSP and NCI_OP_CORE_RESET_NTF. Signed-off-by: Robert Dolca Signed-off-by: Samuel Ortiz

NFC: nci: add generic uart support

2015-06-11T21:37:37Z

Some NFC controller supports UART as host interface. As with SPI, a lot of code can be shared between vendor drivers. This patch add the generic support of UART and provides some extension API for vendor specific needs. This code is strongly inspired by the Bluetooth HCI ldisc implementation. NCI UART vendor drivers will have to register themselves to this layer via nci_uart_register. Underlying tty will have to be configured from user land thanks to an ioctl. Signed-off-by: Vincent Cuissard Signed-off-by: Samuel Ortiz

NFC: nci: Change credits field to credits_cnt

2015-02-04T08:13:15Z

For consistency sake change nci_core_conn_create_rsp structure credits field to credits_cnt. Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz

NFC: nci: Support all destinations type when creating a connection

2015-02-04T08:10:50Z

The current implementation limits nci_core_conn_create_req() to only manage NCI_DESTINATION_NFCEE. Add new parameters to nci_core_conn_create() to support all destination types described in the NCI specification. Because there are some parameters with variable size dynamic buffer allocation is needed. Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz