kernel/include/net/mana/mana.h, branch linux-rolling-stable

net: mana: Drop TX skb on post_work_request failure and unmap resources

2025-11-20T04:11:57Z

Drop TX packets when posting the work request fails and ensure DMA mappings are always cleaned up. Signed-off-by: Aditya Garg Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/1763464269-10431-3-git-send-email-gargaditya@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Handle SKB if TX SGEs exceed hardware limit

2025-11-20T04:11:57Z

The MANA hardware supports a maximum of 30 scatter-gather entries (SGEs) per TX WQE. Exceeding this limit can cause TX failures. Add ndo_features_check() callback to validate SKB layout before transmission. For GSO SKBs that would exceed the hardware SGE limit, clear NETIF_F_GSO_MASK to enforce software segmentation in the stack. Add a fallback in mana_start_xmit() to linearize non-GSO SKBs that still exceed the SGE limit. Also, Add ethtool counter for SKBs linearized Co-developed-by: Dipayaan Roy Signed-off-by: Dipayaan Roy Signed-off-by: Aditya Garg Reviewed-by: Eric Dumazet Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/1763464269-10431-2-git-send-email-gargaditya@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Add standard counter rx_missed_errors

2025-11-18T03:52:30Z

Report standard counter stats->rx_missed_errors using hc_rx_discards_no_wqe from the hardware. Add a global workqueue to periodically run mana_query_gf_stats every 2 seconds to get the latest info in eth_stats and define a driver capability flag to notify hardware of the periodic queries. To avoid repeated failures and log flooding, the workqueue is not rescheduled if mana_query_gf_stats fails on HWC timeout error and the stats are reset to 0. Other errors are transient which will not need a VF reset for recovery. Signed-off-by: Erni Sri Satya Vennela Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/1763120599-6331-3-git-send-email-ernis@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Move hardware counter stats from per-port to per-VF context

2025-11-18T03:52:30Z

Move hardware counter (HC) statistics from mana_port_context to mana_context to enable sharing stats across multiple network ports on the same MANA VF. Previously, each network port queried hardware counters independently using MANA_QUERY_GF_STAT command (GF = Generic Function stats from GDMA hardware), resulting in redundant queries when multiple ports existed on the same device. Isolate hardware counter stats by introducing mana_ethtool_hc_stats in mana_context and update the code to ensure all stats are properly reported via ethtool -S , maintaining consistency with previous behavior. Signed-off-by: Erni Sri Satya Vennela Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/1763120599-6331-2-git-send-email-ernis@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Support HW link state events

2025-10-31T22:56:53Z

Handle the NIC hardware link state events received from the HW channel, then set the proper link state accordingly. And, add a feature bit, GDMA_DRV_CAP_FLAG_1_HW_VPORT_LINK_AWARE, to inform the NIC hardware this handler exists. Our MANA NIC only sends out the link state down/up messages when we need to let the VM rerun DHCP client and change IP address. So, add netif_carrier_on() in the probe(), let the NIC show the right initial state in /sys/class/net/ethX/operstate. Signed-off-by: Haiyang Zhang Link: https://patch.msgid.link/1761770601-16920-1-git-send-email-haiyangz@linux.microsoft.com Signed-off-by: Jakub Kicinski

net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.

2025-08-19T12:42:44Z

This patch enhances RX buffer handling in the mana driver by allocating pages from a page pool and slicing them into MTU-sized fragments, rather than dedicating a full page per packet. This approach is especially beneficial on systems with large base page sizes like 64KB. Key improvements: - Proper integration of page pool for RX buffer allocations. - MTU-sized buffer slicing to improve memory utilization. - Reduce overall per Rx queue memory footprint. - Automatic fallback to full-page buffers when: * Jumbo frames are enabled (MTU > PAGE_SIZE / 2). * The XDP path is active, to avoid complexities with fragment reuse. Testing on VMs with 64KB pages shows around 200% throughput improvement. Memory efficiency is significantly improved due to reduced wastage in page allocations. Example: We are now able to fit 35 rx buffers in a single 64kb page for MTU size of 1500, instead of 1 rx buffer per page previously. Tested: - iperf3, iperf2, and nttcp benchmarks. - Jumbo frames with MTU 9000. - Native XDP programs (XDP_PASS, XDP_DROP, XDP_TX, XDP_REDIRECT) for testing the XDP path in driver. - Memory leak detection (kmemleak). - Driver load/unload, reboot, and stress scenarios. Reviewed-by: Jacob Keller Reviewed-by: Saurabh Sengar Reviewed-by: Haiyang Zhang Signed-off-by: Dipayaan Roy Link: https://patch.msgid.link/20250814140410.GA22089@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Paolo Abeni

net: mana: Add speed support in mana_get_link_ksettings

2025-06-19T13:13:49Z

Allow mana ethtool get_link_ksettings operation to report the maximum speed supported by the SKU in mbps. The driver retrieves this information by issuing a HWC command to the hardware via mana_query_link_cfg(), which retrieves the SKU's maximum supported speed. These APIs when invoked on hardware that are older/do not support these APIs, the speed would be reported as UNKNOWN. Before: $ethtool enP30832s1 > Settings for enP30832s1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: Unknown! Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: yes After: $ethtool enP30832s1 > Settings for enP30832s1: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 16000Mb/s Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: yes Signed-off-by: Erni Sri Satya Vennela Reviewed-by: Haiyang Zhang Reviewed-by: Shradha Gupta Reviewed-by: Saurabh Singh Sengar Reviewed-by: Long Li Link: https://patch.msgid.link/1750144656-2021-4-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni

net: mana: Add support for net_shaper_ops

2025-06-19T13:13:49Z

Introduce support for net_shaper_ops in the MANA driver, enabling configuration of rate limiting on the MANA NIC. To apply rate limiting, the driver issues a HWC command via mana_set_bw_clamp() and updates the corresponding shaper object in the net_shaper cache. If an error occurs during this process, the driver restores the previous speed by querying the current link configuration using mana_query_link_cfg(). The minimum supported bandwidth is 100 Mbps, and only values that are exact multiples of 100 Mbps are allowed. Any other values are rejected. To remove a shaper, the driver resets the bandwidth to the maximum supported by the SKU using mana_set_bw_clamp() and clears the associated cache entry. If an error occurs during this process, the shaper details are retained. On the hardware that does not support these APIs, the net-shaper calls to set speed would fail. Set the speed: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do set --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }, "bw-max": 200000000 }' Get the shaper details: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do get --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev", "id":'$ID' }}' > {'bw-max': 200000000, > 'handle': {'scope': 'netdev'}, > 'ifindex': $IFINDEX, > 'metric': 'bps'} Delete the shaper object: ./tools/net/ynl/pyynl/cli.py \ --spec Documentation/netlink/specs/net_shaper.yaml \ --do delete --json '{"ifindex":'$IFINDEX', "handle":{"scope": "netdev","id":'$ID' }}' Signed-off-by: Erni Sri Satya Vennela Reviewed-by: Haiyang Zhang Reviewed-by: Shradha Gupta Reviewed-by: Saurabh Singh Sengar Reviewed-by: Long Li Link: https://patch.msgid.link/1750144656-2021-3-git-send-email-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni

net: mana: Expose additional hardware counters for drop and TC via ethtool.

2025-06-10T21:23:19Z

Add support for reporting additional hardware counters for drop and TC using the ethtool -S interface. These counters include: - Aggregate Rx/Tx drop counters - Per-TC Rx/Tx packet counters - Per-TC Rx/Tx byte counters - Per-TC Rx/Tx pause frame counters The counters are exposed using ethtool_ops->get_ethtool_stats and ethtool_ops->get_strings. This feature/counters are not available to all versions of hardware. Signed-off-by: Dipayaan Roy Reviewed-by: Subbaraya Sundeep Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/20250609100103.GA7102@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net Signed-off-by: Jakub Kicinski

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2025-05-30T17:18:56Z

Pull rdma updates from Jason Gunthorpe: "Usual collection of driver fixes: - Small bug fixes and cleansup in hfi, hns, rxe, mlx5, mana siw - Further ODP functionality in rxe - Remote access MRs in mana, along with more page sizes - Improve CM scalability with a rwlock around the agent - More trace points for hns - ODP hmm conversion to the new two step dma API - Support the ethernet HW device in mana as well as the RNIC - Cleanups: - Use secs_to_jiffies() when appropriate - Use ERR_CAST() instead of naked casts - Don't use %pK in printk - Unusued functions removed - Allocation type matching" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (57 commits) RDMA/cma: Fix hang when cma_netevent_callback fails to queue_work RDMA/bnxt_re: Support extended stats for Thor2 VF RDMA/hns: Fix endian issue in trace events RDMA/mlx5: Avoid flexible array warning IB/cm: Remove dead code and adjust naming RDMA/core: Avoid hmm_dma_map_alloc() for virtual DMA devices RDMA/rxe: Break endless pagefault loop for RO pages RDMA/bnxt_re: Fix return code of bnxt_re_configure_cc RDMA/bnxt_re: Fix missing error handling for tx_queue RDMA/bnxt_re: Fix incorrect display of inactivity_cp in debugfs output RDMA/mlx5: Add support for 200Gbps per lane speeds RDMA/mlx5: Remove the redundant MLX5_IB_STAGE_UAR stage RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction net: mana: Add support for auxiliary device servicing events RDMA/mana_ib: unify mana_ib functions to support any gdma device RDMA/mana_ib: Add support of mana_ib for RNIC and ETH nic net: mana: Probe rdma device in mana driver RDMA/siw: replace redundant ternary operator with just rv RDMA/umem: Separate implicit ODP initialization from explicit ODP RDMA/core: Convert UMEM ODP DMA mapping to caching IOVA and page linkage ...