kernel/include/net/inet_connection_sock.h, branch linux-4.16.y

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03Z

This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^$[^\"]*$$\$/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2018-01-31T22:31:10Z

Pull networking updates from David Miller: 1) Significantly shrink the core networking routing structures. Result of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf 2) Add netdevsim driver for testing various offloads, from Jakub Kicinski. 3) Support cross-chip FDB operations in DSA, from Vivien Didelot. 4) Add a 2nd listener hash table for TCP, similar to what was done for UDP. From Martin KaFai Lau. 5) Add eBPF based queue selection to tun, from Jason Wang. 6) Lockless qdisc support, from John Fastabend. 7) SCTP stream interleave support, from Xin Long. 8) Smoother TCP receive autotuning, from Eric Dumazet. 9) Lots of erspan tunneling enhancements, from William Tu. 10) Add true function call support to BPF, from Alexei Starovoitov. 11) Add explicit support for GRO HW offloading, from Michael Chan. 12) Support extack generation in more netlink subsystems. From Alexander Aring, Quentin Monnet, and Jakub Kicinski. 13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From Russell King. 14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso. 15) Many improvements and simplifications to the NFP driver bpf JIT, from Jakub Kicinski. 16) Support for ipv6 non-equal cost multipath routing, from Ido Schimmel. 17) Add resource abstration to devlink, from Arkadi Sharshevsky. 18) Packet scheduler classifier shared filter block support, from Jiri Pirko. 19) Avoid locking in act_csum, from Davide Caratti. 20) devinet_ioctl() simplifications from Al viro. 21) More TCP bpf improvements from Lawrence Brakmo. 22) Add support for onlink ipv6 route flag, similar to ipv4, from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits) tls: Add support for encryption using async offload accelerator ip6mr: fix stale iterator net/sched: kconfig: Remove blank help texts openvswitch: meter: Use 64-bit arithmetic instead of 32-bit tcp_nv: fix potential integer overflow in tcpnv_acked r8169: fix RTL8168EP take too long to complete driver initialization. qmi_wwan: Add support for Quectel EP06 rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK ipmr: Fix ptrdiff_t print formatting ibmvnic: Wait for device response when changing MAC qlcnic: fix deadlock bug tcp: release sk_frag.page in tcp_disconnect ipv4: Get the address of interface correctly. net_sched: gen_estimator: fix lockdep splat net: macb: Handle HRESP error net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring ipv6: addrconf: break critical section in addrconf_verify_rtnl() ipv6: change route cache aging logic i40e/i40evf: Update DESC_NEEDED value to reflect larger value bnxt_en: cleanup DIM work on device shutdown ...

inet: Add a 2nd listener hashtable (port+addr)

2017-12-03T15:18:28Z

The current listener hashtable is hashed by port only. When a process is listening at many IP addresses with the same port (e.g. [IP1]:443, [IP2]:443... [IPN]:443), the inet[6]_lookup_listener() performance is degraded to a link list. It is prone to syn attack. UDP had a similar issue and a second hashtable was added to resolve it. This patch adds a second hashtable for the listener's sockets. The second hashtable is hashed by port and address. It cannot reuse the existing skc_portaddr_node which is shared with skc_bind_node. TCP listener needs to use skc_bind_node. Instead, this patch adds a hlist_node 'icsk_listen_portaddr_node' to the inet_connection_sock which the listener (like TCP) also belongs to. The new portaddr hashtable may need two lookup (First by IP:PORT. Second by INADDR_ANY:PORT if the IP:PORT is a not found). Hence, it implements a similar cut off as UDP such that it will only consult the new portaddr hashtable if the current port-only hashtable has >10 sk in the link-list. lhash2 and lhash2_mask are added to 'struct inet_hashinfo'. I take this chance to plug a 4 bytes hole. It is done by first moving the existing bind_bucket_cachep up and then add the new (int lhash2_mask, *lhash2) after the existing bhash_size. Signed-off-by: Martin KaFai Lau Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller

net: annotate ->poll() instances

2017-11-27T21:20:04Z

Signed-off-by: Al Viro

inet/connection_sock: Convert timers to use timer_setup()

2017-10-18T11:39:55Z

In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: "David S. Miller" Cc: Gerrit Renker Cc: Alexey Kuznetsov Cc: Hideaki YOSHIFUJI Cc: netdev@vger.kernel.org Cc: dccp@vger.kernel.org Signed-off-by: Kees Cook Signed-off-by: David S. Miller

tcp: ULP infrastructure

2017-06-15T16:12:40Z

Add the infrustructure for attaching Upper Layer Protocols (ULPs) over TCP sockets. Based on a similar infrastructure in tcp_cong. The idea is that any ULP can add its own logic by changing the TCP proto_ops structure to its own methods. Example usage: setsockopt(sock, SOL_TCP, TCP_ULP, "tls", sizeof("tls")); modules will call: tcp_register_ulp(&tcp_tls_ulp_ops); to register/unregister their ulp, with an init function and name. A list of registered ulps will be returned by tcp_get_available_ulp, which is hooked up to /proc. Example: $ cat /proc/sys/net/ipv4/tcp_available_ulp tls There is currently no functionality to remove or chain ULPs, but it should be possible to add these in the future if needed. Signed-off-by: Boris Pismenny Signed-off-by: Dave Watson Signed-off-by: David S. Miller

net: Work around lockdep limitation in sockets that use sockets

2017-03-10T02:23:27Z

Lockdep issues a circular dependency warning when AFS issues an operation through AF_RXRPC from a context in which the VFS/VM holds the mmap_sem. The theory lockdep comes up with is as follows: (1) If the pagefault handler decides it needs to read pages from AFS, it calls AFS with mmap_sem held and AFS begins an AF_RXRPC call, but creating a call requires the socket lock: mmap_sem must be taken before sk_lock-AF_RXRPC (2) afs_open_socket() opens an AF_RXRPC socket and binds it. rxrpc_bind() binds the underlying UDP socket whilst holding its socket lock. inet_bind() takes its own socket lock: sk_lock-AF_RXRPC must be taken before sk_lock-AF_INET (3) Reading from a TCP socket into a userspace buffer might cause a fault and thus cause the kernel to take the mmap_sem, but the TCP socket is locked whilst doing this: sk_lock-AF_INET must be taken before mmap_sem However, lockdep's theory is wrong in this instance because it deals only with lock classes and not individual locks. The AF_INET lock in (2) isn't really equivalent to the AF_INET lock in (3) as the former deals with a socket entirely internal to the kernel that never sees userspace. This is a limitation in the design of lockdep. Fix the general case by: (1) Double up all the locking keys used in sockets so that one set are used if the socket is created by userspace and the other set is used if the socket is created by the kernel. (2) Store the kern parameter passed to sk_alloc() in a variable in the sock struct (sk_kern_sock). This informs sock_lock_init(), sock_init_data() and sk_clone_lock() as to the lock keys to be used. Note that the child created by sk_clone_lock() inherits the parent's kern setting. (3) Add a 'kern' parameter to ->accept() that is analogous to the one passed in to ->create() that distinguishes whether kernel_accept() or sys_accept4() was the caller and can be passed to sk_alloc(). Note that a lot of accept functions merely dequeue an already allocated socket. I haven't touched these as the new socket already exists before we get the parameter. Note also that there are a couple of places where I've made the accepted socket unconditionally kernel-based: irda_accept() rds_rcp_accept_one() tcp_accept_from_sock() because they follow a sock_create_kern() and accept off of that. Whilst creating this, I noticed that lustre and ocfs don't create sockets through sock_create_kern() and thus they aren't marked as for-kernel, though they appear to be internal. I wonder if these should do that so that they use the new set of lock keys. Signed-off-by: David Howells Signed-off-by: David S. Miller

inet: drop ->bind_conflict

2017-01-18T18:04:28Z

The only difference between inet6_csk_bind_conflict and inet_csk_bind_conflict is how they check the rcv_saddr, so delete this call back and simply change inet_csk_bind_conflict to call inet_rcv_saddr_equal. Signed-off-by: Josef Bacik Signed-off-by: David S. Miller

tcp: add reordering timer in RACK loss detection

2017-01-14T03:37:16Z

This patch makes RACK install a reordering timer when it suspects some packets might be lost, but wants to delay the decision a little bit to accomodate reordering. It does not create a new timer but instead repurposes the existing RTO timer, because both are meant to retransmit packets. Specifically it arms a timer ICSK_TIME_REO_TIMEOUT when the RACK timing check fails. The wait time is set to RACK.RTT + RACK.reo_wnd - (NOW - Packet.xmit_time) + fudge This translates to expecting a packet (Packet) should take (RACK.RTT + RACK.reo_wnd + fudge) to deliver after it was sent. When there are multiple packets that need a timer, we use one timer with the maximum timeout. Therefore the timer conservatively uses the maximum window to expire N packets by one timeout, instead of N timeouts to expire N packets sent at different times. The fudge factor is 2 jiffies to ensure when the timer fires, all the suspected packets would exceed the deadline and be marked lost by tcp_rack_detect_loss(). It has to be at least 1 jiffy because the clock may tick between calling icsk_reset_xmit_timer(timeout) and actually hang the timer. The next jiffy is to lower-bound the timeout to 2 jiffies when reo_wnd is < 1ms. When the reordering timer fires (tcp_rack_reo_timeout): If we aren't in Recovery we'll enter fast recovery and force fast retransmit. This is very similar to the early retransmit (RFC5827) except RACK is not constrained to only enter recovery for small outstanding flights. Signed-off-by: Yuchung Cheng Signed-off-by: Neal Cardwell Acked-by: Eric Dumazet Signed-off-by: David S. Miller

inet: Fix get port to handle zero port number with soreuseport set

2016-12-17T16:13:19Z

A user may call listen with binding an explicit port with the intent that the kernel will assign an available port to the socket. In this case inet_csk_get_port does a port scan. For such sockets, the user may also set soreuseport with the intent a creating more sockets for the port that is selected. The problem is that the initial socket being opened could inadvertently choose an existing and unreleated port number that was already created with soreuseport. This patch adds a boolean parameter to inet_bind_conflict that indicates rather soreuseport is allowed for the check (in addition to sk->sk_reuseport). In calls to inet_bind_conflict from inet_csk_get_port the argument is set to true if an explicit port is being looked up (snum argument is nonzero), and is false if port scan is done. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller