kernel/include/net/bluetooth, branch linux-5.11.y

Bluetooth: verify AMP hci_chan before amp_destroy

2021-05-14T08:49:21Z

commit 5c4c8c9544099bb9043a10a5318130a943e32fc3 upstream. hci_chan can be created in 2 places: hci_loglink_complete_evt() if it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory, Only AMP hci_chan should be removed by a call to hci_disconn_loglink_complete_evt(). However, the controller might mess up, call that function, and destroy an hci_chan which is not initiated by hci_loglink_complete_evt(). This patch adds a verification that the destroyed hci_chan must have been init'd by hci_loglink_complete_evt(). Example crash call trace: Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe3/0x144 lib/dump_stack.c:118 print_address_description+0x67/0x22a mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report mm/kasan/report.c:412 [inline] kasan_report+0x251/0x28f mm/kasan/report.c:396 hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072 l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877 l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661 l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline] l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline] l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline] l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023 l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596 hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline] hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 Allocated by task 38: set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553 kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787 kmalloc include/linux/slab.h:515 [inline] kzalloc include/linux/slab.h:709 [inline] hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674 l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062 l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline] l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381 hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404 hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline] hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 Freed by task 1732: set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free mm/kasan/kasan.c:521 [inline] __kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436 slab_free mm/slub.c:3009 [inline] kfree+0x182/0x21e mm/slub.c:3972 hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline] hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 The buggy address belongs to the object at ffff8881d7af9180 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 24 bytes inside of 128-byte region [ffff8881d7af9180, ffff8881d7af9200) The buggy address belongs to the page: page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0 flags: 0x8000000000000200(slab) raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200 raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Signed-off-by: Archie Pusaka Reported-by: syzbot+98228e7407314d2d4ba2@syzkaller.appspotmail.com Reviewed-by: Alain Michaud Reviewed-by: Abhishek Pandit-Subedi Signed-off-by: Marcel Holtmann Cc: George Kennedy Signed-off-by: Greg Kroah-Hartman

Bluetooth: Add new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk

2021-03-07T11:35:51Z

[ Upstream commit 219991e6be7f4a31d471611e265b72f75b2d0538 ] Some devices, e.g. the RTL8723BS bluetooth part, some USB attached devices, completely drop from the bus on a system-suspend. These devices will have their driver unbound and rebound on resume (when the dropping of the bus gets detected) and will show up as a new HCI after resume. These devices do not benefit from the suspend / resume handling work done by the hci_suspend_notifier. At best this unnecessarily adds some time to the suspend/resume time. But this may also actually cause problems, if the code doing the driver unbinding runs after the pm-notifier then the hci_suspend_notifier code will try to talk to a device which is now in an uninitialized state. This commit adds a new HCI_QUIRK_NO_SUSPEND_NOTIFIER quirk which allows drivers to opt-out of the hci_suspend_notifier when they know beforehand that their device will be fully re-initialized / reprobed on resume. Signed-off-by: Hans de Goede Reviewed-by: Abhishek Pandit-Subedi Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin

Bluetooth: Change MGMT security info CMD to be more generic

2020-12-07T15:01:42Z

For advertising, we wish to know the LE tx power capabilities of the controller in userspace, so this patch edits the Security Info MGMT command to be more generic, such that other various controller capabilities can be included in the EIR data. This change also includes the LE min and max tx power into this newly-named command. The change was tested by manually verifying that the MGMT command returns the tx power range as expected in userspace. Reviewed-by: Sonny Sasaka Signed-off-by: Daniel Winkler Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: Query LE tx power on startup

2020-12-07T15:01:38Z

Queries tx power via HCI_LE_Read_Transmit_Power command when the hci device is initialized, and stores resulting min/max LE power in hdev struct. If command isn't available (< BT5 support), min/max values both default to HCI_TX_POWER_INVALID. This patch is manually verified by ensuring BT5 devices correctly query and receive controller tx power range. Reviewed-by: Sonny Sasaka Signed-off-by: Daniel Winkler Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: Use intervals and tx power from mgmt cmds

2020-12-07T15:01:33Z

This patch takes the min/max intervals and tx power optionally provided in mgmt interface, stores them in the advertisement struct, and uses them when configuring the hci requests. While tx power is not used if extended advertising is unavailable, software rotation will use the min and max advertising intervals specified by the client. This change is validated manually by ensuring the min/max intervals are propagated to the controller on both hatch (extended advertising) and kukui (no extended advertising) chromebooks, and that tx power is propagated correctly on hatch. These tests are performed with multiple advertisements simultaneously. Reviewed-by: Sonny Sasaka Signed-off-by: Daniel Winkler Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: Break add adv into two mgmt commands

2020-12-07T15:01:28Z

This patch adds support for the new advertising add interface, with the first command setting advertising parameters and the second to set advertising data. The set parameters command allows the caller to leave some fields "unset", with a params bitfield defining which params were purposefully set. Unset parameters will be given defaults when calling hci_add_adv_instance. The data passed to the param mgmt command is allowed to be flexible, so in the future if bluetoothd passes a larger structure with new params, the mgmt command will ignore the unknown members at the end. This change has been validated on both hatch (extended advertising) and kukui (no extended advertising) chromebooks running bluetoothd that support this new interface. I ran the following manual tests: - Set several (3) advertisements using modified test_advertisement.py - For each, validate correct data and parameters in btmon trace - Verified both for software rotation and extended adv Automatic test suite also run, testing many (25) scenarios of single and multi-advertising for data/parameter correctness. Reviewed-by: Sonny Sasaka Signed-off-by: Daniel Winkler Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: Add helper to set adv data

2020-12-07T15:01:25Z

We wish to handle advertising data separately from advertising parameters in our new MGMT requests. This change adds a helper that allows the advertising data and scan response to be updated for an existing advertising instance. Reviewed-by: Sonny Sasaka Signed-off-by: Daniel Winkler Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: Add toggle to switch off interleave scan

2020-12-07T15:01:00Z

This patch add a configurable parameter to switch off the interleave scan feature. Signed-off-by: Howard Chung Reviewed-by: Alain Michaud Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: Interleave with allowlist scan

2020-12-07T15:00:43Z

This patch implements the interleaving between allowlist scan and no-filter scan. It'll be used to save power when at least one monitor is registered and at least one pending connection or one device to be scanned for. The durations of the allowlist scan and the no-filter scan are controlled by MGMT command: Set Default System Configuration. The default values are set randomly for now. Signed-off-by: Howard Chung Reviewed-by: Alain Michaud Reviewed-by: Manish Mandlik Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: fix typo in struct name

2020-12-07T14:51:22Z

Signed-off-by: Reo Shiseki Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg