kernel/include/net/bluetooth/hci_sync.h, branch linux-6.8.y

Bluetooth: hci_sync: Attempt to dequeue connection attempt

2024-05-02T14:35:19Z

[ Upstream commit 881559af5f5c545f6828e7c74d79813eb886d523 ] If connection is still queued/pending in the cmd_sync queue it means no command has been generated and it should be safe to just dequeue the callback when it is being aborted. Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 2e7ed5f5e69b ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync") Signed-off-by: Sasha Levin

Bluetooth: hci_sync: Add helper functions to manipulate cmd_sync queue

2024-05-02T14:35:18Z

[ Upstream commit 505ea2b295929e7be2b4e1bc86ee31cb7862fb01 ] This adds functions to queue, dequeue and lookup into the cmd_sync list. Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 2e7ed5f5e69b ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync") Signed-off-by: Sasha Levin

Bluetooth: hci_conn: Fix UAF Write in __hci_acl_create_connection_sync

2024-05-02T14:35:18Z

[ Upstream commit 5f641f03abccddd1a37233ff1b8e774b9ff1f4e8 ] This fixes the UAF on __hci_acl_create_connection_sync caused by connection abortion, it uses the same logic as to LE_LINK which uses hci_cmd_sync_cancel to prevent the callback to run if the connection is abort prematurely. Reported-by: syzbot+3f0a39be7a2035700868@syzkaller.appspotmail.com Fixes: 45340097ce6e ("Bluetooth: hci_conn: Only do ACL connections sequentially") Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 2e7ed5f5e69b ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync") Signed-off-by: Sasha Levin

Bluetooth: hci_conn: Only do ACL connections sequentially

2024-05-02T14:35:18Z

[ Upstream commit 45340097ce6ea7e875674a5a7d24c95ecbc93ef9 ] Pretty much all bluetooth chipsets only support paging a single device at a time, and if they don't reject a secondary "Create Connection" request while another is still ongoing, they'll most likely serialize those requests in the firware. With commit 4c67bc74f016 ("[Bluetooth] Support concurrent connect requests") we started adding some serialization of our own in case the adapter returns "Command Disallowed" HCI error. This commit was using the BT_CONNECT2 state for the serialization, this state is also used for a few more things (most notably to indicate we're waiting for an inquiry to cancel) and therefore a bit unreliable. Also not all BT firwares would respond with "Command Disallowed" on too many connection requests, some will also respond with "Hardware Failure" (BCM4378), and others will error out later and send a "Connect Complete" event with error "Rejected Limited Resources" (Marvell 88W8897). We can clean things up a bit and also make the serialization more reliable by using our hci_sync machinery to always do "Create Connection" requests in a sequential manner. This is very similar to what we're already doing for establishing LE connections, and it works well there. Note that this causes a test failure in mgmt-tester (test "Pair Device - Power off 1") because the hci_abort_conn_sync() changes the error we return on timeout of the "Create Connection". We'll fix this on the mgmt-tester side by adjusting the expected error for the test. Signed-off-by: Jonas Dreßler Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 2e7ed5f5e69b ("Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync") Signed-off-by: Sasha Levin

Bluetooth: hci_core: Cancel request on command timeout

2024-03-26T22:16:54Z

[ Upstream commit 63298d6e752fc0ec7f5093860af8bc9f047b30c8 ] If command has timed out call __hci_cmd_sync_cancel to notify the hci_req since it will inevitably cause a timeout. This also rework the code around __hci_cmd_sync_cancel since it was wrongly assuming it needs to cancel timer as well, but sometimes the timers have not been started or in fact they already had timed out in which case they don't need to be cancel yet again. Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 2615fd9a7c25 ("Bluetooth: hci_sync: Fix overwriting request callback") Signed-off-by: Sasha Levin

Bluetooth: ISO: Fix BIS cleanup

2023-10-23T17:54:06Z

This fixes the master BIS cleanup procedure - as opposed to CIS cleanup, no HCI disconnect command should be issued. A master BIS should only be terminated by disabling periodic and extended advertising, and terminating the BIG. In case of a Broadcast Receiver, all BIS and PA connections can be cleaned up by calling hci_conn_failed, since it contains all function calls that are necessary for successful cleanup. Signed-off-by: Iulia Tanasescu Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_sync: Introduce PTR_UINT/UINT_PTR macros

2023-08-11T18:55:48Z

This introduces PTR_UINT/UINT_PTR macros and replace the use of PTR_ERR/ERR_PTR. Signed-off-by: Luiz Augusto von Dentz

Bluetooth: ISO: do not emit new LE Create CIS if previous is pending

2023-08-11T18:36:01Z

LE Create CIS command shall not be sent before all CIS Established events from its previous invocation have been processed. Currently it is sent via hci_sync but that only waits for the first event, but there can be multiple. Make it wait for all events, and simplify the CIS creation as follows: Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been sent for the connection but it is not yet completed. Make BT_CONNECT state to mean the connection wants Create CIS. On events after which new Create CIS may need to be sent, send it if possible and some connections need it. These events are: hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis, hci_le_cis_estabilished_evt. The Create CIS status/completion events shall queue new Create CIS only if at least one of the connections transitions away from BT_CONNECT, so that we don't loop if controller is sending bogus events. This fixes sending multiple CIS Create for the same CIS in the "ISO AC 6(i) - Success" BlueZ test case: < HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0] Number of CIS: 2 CIS Handle: 257 ACL Handle: 42 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #130 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 257 ... < HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0] ... > HCI Event: Command Complete (0x0e) plen 6 #133 [hci0] LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1 ... < HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0] Number of CIS: 1 CIS Handle: 258 ACL Handle: 42 > HCI Event: Command Status (0x0f) plen 4 #135 [hci0] LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1 Status: ACL Connection Already Exists (0x0b) > HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0] LE Connected Isochronous Stream Established (0x19) Status: Success (0x00) Connection Handle: 258 ... Fixes: c09b80be6ffc ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED") Signed-off-by: Pauli Virtanen Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running

2023-04-24T05:07:43Z

This makes sure hci_cmd_sync_queue only queue new work if HCI_RUNNING has been set otherwise there is a risk of commands being sent while turning off. Because hci_cmd_sync_queue can no longer queue work while HCI_RUNNING is not set it cannot be used to power on adapters so instead hci_cmd_sync_submit is introduced which bypass the HCI_RUNNING check, so it behaves like the old implementation. Link: https://lore.kernel.org/all/CAB4PzUpDMvdc8j2MdeSAy1KkAE-D3woprCwAdYWeOc-3v3c9Sw@mail.gmail.com/ Signed-off-by: Luiz Augusto von Dentz

Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED

2023-04-24T05:04:01Z

When submitting HCI_OP_LE_CREATE_CIS the code shall wait for HCI_EVT_LE_CIS_ESTABLISHED thus enforcing the serialization of HCI_OP_LE_CREATE_CIS as the Core spec does not allow to send them in parallel: BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E page 2566: If the Host issues this command before all the HCI_LE_CIS_Established events from the previous use of the command have been generated, the Controller shall return the error code Command Disallowed (0x0C). Signed-off-by: Luiz Augusto von Dentz