kernel/include/net/bluetooth/hci.h, branch linux-6.6.y

Bluetooth: HCI: Fix tracking of advertisement set/instance 0x00

2025-11-24T09:29:14Z

[ Upstream commit 0d92808024b4e9868cef68d16f121d509843e80e ] This fixes the state tracking of advertisement set/instance 0x00 which is considered a legacy instance and is not tracked individually by adv_instances list, previously it was assumed that hci_dev itself would track it via HCI_LE_ADV but that is a global state not specifc to instance 0x00, so to fix it a new flag is introduced that only tracks the state of instance 0x00. Fixes: 1488af7b8b5f ("Bluetooth: hci_sync: Fix hci_resume_advertising_sync") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: hci_event: Mask data status from LE ext adv reports

2025-08-15T10:08:49Z

[ Upstream commit 0cadf8534f2a727bc3a01e8c583b085d25963ee0 ] The Event_Type field in an LE Extended Advertising Report uses bits 5 and 6 for data status (e.g. truncation or fragmentation), not the PDU type itself. The ext_evt_type_to_legacy() function fails to mask these status bits before evaluation. This causes valid advertisements with status bits set (e.g. a truncated non-connectable advertisement, which ends up showing as PDU type 0x40) to be misclassified as unknown and subsequently dropped. This is okay for most checks which use bitwise AND on the relevant event type bits, but it doesn't work for non-connectable types, which are checked with '== LE_EXT_ADV_NON_CONN_IND' (that is, zero). In terms of behaviour, first the device sends a truncated report: > HCI Event: LE Meta Event (0x3e) plen 26 LE Extended Advertising Report (0x0d) Entry 0 Event type: 0x0040 Data status: Incomplete, data truncated, no more to come Address type: Random (0x01) Address: 1D:12:46:FA:F8:6E (Non-Resolvable) SID: 0x03 RSSI: -98 dBm (0x9e) Data length: 0x00 Then, a few seconds later, it sends the subsequent complete report: > HCI Event: LE Meta Event (0x3e) plen 122 LE Extended Advertising Report (0x0d) Entry 0 Event type: 0x0000 Data status: Complete Address type: Random (0x01) Address: 1D:12:46:FA:F8:6E (Non-Resolvable) SID: 0x03 RSSI: -97 dBm (0x9f) Data length: 0x60 Service Data: Google (0xfef3) Data[92]: ... These devices often send multiple truncated reports per second. This patch introduces a PDU type mask to ensure only the relevant bits are evaluated, allowing for the correct translation of all valid extended advertising packets. Fixes: b2cc9761f144 ("Bluetooth: Handle extended ADV PDU types") Signed-off-by: Chris Down Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: hci_event: Fix connection regression between LE and non-LE adapters

2025-03-28T20:59:53Z

[ Upstream commit f6685a96c8c8a07e260e39bac86d4163cfb38a4d ] Due to a typo during defining HCI errors it is not possible to connect LE-capable device with BR/EDR only adapter. The connection is terminated by the LE adapter because the invalid LL params error code is treated as unsupported remote feature. Fixes: 79c0868ad65a ("Bluetooth: hci_event: Use HCI error defines instead of magic values") Signed-off-by: Arkadiusz Bokowy Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: Add new quirks for ATS2851

2024-12-14T19:00:09Z

[ Upstream commit 94464a7b71634037b13d54021e0dfd0fb0d8c1f0 ] This adds quirks for broken extended create connection, and write auth payload timeout. Signed-off-by: Danil Pylaev Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: hci_conn: Only do ACL connections sequentially

2024-09-12T09:11:33Z

[ Upstream commit 45340097ce6ea7e875674a5a7d24c95ecbc93ef9 ] Pretty much all bluetooth chipsets only support paging a single device at a time, and if they don't reject a secondary "Create Connection" request while another is still ongoing, they'll most likely serialize those requests in the firware. With commit 4c67bc74f016 ("[Bluetooth] Support concurrent connect requests") we started adding some serialization of our own in case the adapter returns "Command Disallowed" HCI error. This commit was using the BT_CONNECT2 state for the serialization, this state is also used for a few more things (most notably to indicate we're waiting for an inquiry to cancel) and therefore a bit unreliable. Also not all BT firwares would respond with "Command Disallowed" on too many connection requests, some will also respond with "Hardware Failure" (BCM4378), and others will error out later and send a "Connect Complete" event with error "Rejected Limited Resources" (Marvell 88W8897). We can clean things up a bit and also make the serialization more reliable by using our hci_sync machinery to always do "Create Connection" requests in a sequential manner. This is very similar to what we're already doing for establishing LE connections, and it works well there. Note that this causes a test failure in mgmt-tester (test "Pair Device - Power off 1") because the hci_abort_conn_sync() changes the error we return on timeout of the "Create Connection". We'll fix this on the mgmt-tester side by adjusting the expected error for the test. Signed-off-by: Jonas Dreßler Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT") Signed-off-by: Sasha Levin

Bluetooth: hci_event: Use HCI error defines instead of magic values

2024-09-12T09:11:33Z

[ Upstream commit 79c0868ad65a8fc7cdfaa5f2b77a4b70d0b0ea16 ] We have error defines already, so let's use them. Signed-off-by: Jonas Dreßler Signed-off-by: Luiz Augusto von Dentz Stable-dep-of: 227a0cdf4a02 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT") Signed-off-by: Sasha Levin

Bluetooth: HCI: Remove HCI_AMP support

2024-06-12T09:11:55Z

[ Upstream commit 84a4bb6548a29326564f0e659fb8064503ecc1c7 ] Since BT_HS has been remove HCI_AMP controllers no longer has any use so remove it along with the capability of creating AMP controllers. Since we no longer need to differentiate between AMP and Primary controllers, as only HCI_PRIMARY is left, this also remove hdev->dev_type altogether. Fixes: e7b02296fb40 ("Bluetooth: Remove BT_HS") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()

2024-05-25T14:22:53Z

commit a5b862c6a221459d54e494e88965b48dcfa6cc44 upstream. l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec520ad ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz Signed-off-by: Sungwoo Kim Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: Add new quirk for broken read key length on ATS2851

2024-04-13T11:07:33Z

[ Upstream commit 48201a3b3f398be6a01f78a14b18bd5d31c47458 ] The ATS2851 controller erroneously reports support for the "Read Encryption Key Length" HCI command. This makes it unable to connect to any devices, since this command is issued by the kernel during the connection process in response to an "Encryption Change" HCI event. Add a new quirk (HCI_QUIRK_BROKEN_ENC_KEY_SIZE) to hint that the command is unsupported, preventing it from interrupting the connection process. This is the error log from btmon before this patch: > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 2048 Address: ... Encryption: Enabled with E0 (0x01) < HCI Command: Read Encryption Key Size (0x05|0x0008) plen 2 Handle: 2048 Address: ... > HCI Event: Command Status (0x0f) plen 4 Read Encryption Key Size (0x05|0x0008) ncmd 1 Status: Unknown HCI Command (0x01) Signed-off-by: Vinicius Peixoto Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin

Bluetooth: add quirk for broken address properties

2024-04-10T14:35:48Z

commit 39646f29b100566451d37abc4cc8cdd583756dfe upstream. Some Bluetooth controllers lack persistent storage for the device address and instead one can be provided by the boot firmware using the 'local-bd-address' devicetree property. The Bluetooth devicetree bindings clearly states that the address should be specified in little-endian order, but due to a long-standing bug in the Qualcomm driver which reversed the address some boot firmware has been providing the address in big-endian order instead. Add a new quirk that can be set on platforms with broken firmware and use it to reverse the address when parsing the property so that the underlying driver bug can be fixed. Fixes: 5c0a1001c8be ("Bluetooth: hci_qca: Add helper to set device address") Cc: stable@vger.kernel.org # 5.1 Reviewed-by: Douglas Anderson Signed-off-by: Johan Hovold Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman