kernel/include/linux, branch linux-5.7.y

iommu/vt-d: Enforce PASID devTLB field mask

2020-08-21T11:07:36Z

[ Upstream commit 5f77d6ca5ca74e4b4a5e2e010f7ff50c45dea326 ] Set proper masks to avoid invalid input spillover to reserved bits. Signed-off-by: Liu Yi L Signed-off-by: Jacob Pan Signed-off-by: Lu Baolu Reviewed-by: Eric Auger Link: https://lore.kernel.org/r/20200724014925.15523-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin

hugetlbfs: remove call to huge_pte_alloc without i_mmap_rwsem

2020-08-21T11:07:27Z

commit 34ae204f18519f0920bd50a644abd6fefc8dbfcf upstream. Commit c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") requires callers of huge_pte_alloc to hold i_mmap_rwsem in at least read mode. This is because the explicit locking in huge_pmd_share (called by huge_pte_alloc) was removed. When restructuring the code, the call to huge_pte_alloc in the else block at the beginning of hugetlb_fault was missed. Unfortunately, that else clause is exercised when there is no page table entry. This will likely lead to a call to huge_pmd_share. If huge_pmd_share thinks pmd sharing is possible, it will traverse the mapping tree (i_mmap) without holding i_mmap_rwsem. If someone else is modifying the tree, bad things such as addressing exceptions or worse could happen. Simply remove the else clause. It should have been removed previously. The code following the else will call huge_pte_alloc with the appropriate locking. To prevent this type of issue in the future, add routines to assert that i_mmap_rwsem is held, and call these routines in huge pmd sharing routines. Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization") Suggested-by: Matthew Wilcox Signed-off-by: Mike Kravetz Signed-off-by: Andrew Morton Cc: Michal Hocko Cc: Hugh Dickins Cc: Naoya Horiguchi Cc: "Aneesh Kumar K.V" Cc: Andrea Arcangeli Cc: "Kirill A.Shutemov" Cc: Davidlohr Bueso Cc: Prakash Sangappa Cc: Link: http://lkml.kernel.org/r/e670f327-5cf9-1959-96e4-6dc7cc30d3d5@oracle.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

PCI/ATS: Add pci_pri_supported() to check device or associated PF

2020-08-21T11:07:17Z

commit 3f9a7a13fe4cb6e119e4e4745fbf975d30bfac9b upstream. For SR-IOV, the PF PRI is shared between the PF and any associated VFs, and the PRI Capability is allowed for PFs but not for VFs. Searching for the PRI Capability on a VF always fails, even if its associated PF supports PRI. Add pci_pri_supported() to check whether device or its associated PF supports PRI. [bhelgaas: commit log, avoid "!!"] Fixes: b16d0cb9e2fc ("iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS") Link: https://lore.kernel.org/r/1595543849-19692-1-git-send-email-ashok.raj@intel.com Signed-off-by: Ashok Raj Signed-off-by: Bjorn Helgaas Reviewed-by: Lu Baolu Acked-by: Joerg Roedel Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman

genirq/affinity: Make affinity setting if activated opt-in

2020-08-21T11:07:17Z

commit f0c7baca180046824e07fc5f1326e83a8fd150c7 upstream. John reported that on a RK3288 system the perf per CPU interrupts are all affine to CPU0 and provided the analysis: "It looks like what happens is that because the interrupts are not per-CPU in the hardware, armpmu_request_irq() calls irq_force_affinity() while the interrupt is deactivated and then request_irq() with IRQF_PERCPU | IRQF_NOBALANCING. Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls irq_setup_affinity() which returns early because IRQF_PERCPU and IRQF_NOBALANCING are set, leaving the interrupt on its original CPU." This was broken by the recent commit which blocked interrupt affinity setting in hardware before activation of the interrupt. While this works in general, it does not work for this particular case. As contrary to the initial analysis not all interrupt chip drivers implement an activate callback, the safe cure is to make the deferred interrupt affinity setting at activation time opt-in. Implement the necessary core logic and make the two irqchip implementations for which this is required opt-in. In hindsight this would have been the right thing to do, but ... Fixes: baedb87d1b53 ("genirq/affinity: Handle affinity setting on inactive interrupts correctly") Reported-by: John Keeping Signed-off-by: Thomas Gleixner Tested-by: Marc Zyngier Acked-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman

bitfield.h: don't compile-time validate _val in FIELD_FIT

2020-08-19T06:24:13Z

commit 444da3f52407d74c9aa12187ac6b01f76ee47d62 upstream. When ur_load_imm_any() is inlined into jeq_imm(), it's possible for the compiler to deduce a case where _val can only have the value of -1 at compile time. Specifically, /* struct bpf_insn: _s32 imm */ u64 imm = insn->imm; /* sign extend */ if (imm >> 32) { /* non-zero only if insn->imm is negative */ /* inlined from ur_load_imm_any */ u32 __imm = imm >> 32; /* therefore, always 0xffffffff */ if (__builtin_constant_p(__imm) && __imm > 255) compiletime_assert_XXX() This can result in tripping a BUILD_BUG_ON() in __BF_FIELD_CHECK() that checks that a given value is representable in one byte (interpreted as unsigned). FIELD_FIT() should return true or false at runtime for whether a value can fit for not. Don't break the build over a value that's too large for the mask. We'd prefer to keep the inlining and compiler optimizations though we know this case will always return false. Cc: stable@vger.kernel.org Fixes: 1697599ee301a ("bitfield.h: add FIELD_FIT() helper") Link: https://lore.kernel.org/kernel-hardening/CAK7LNASvb0UDJ0U5wkYYRzTAdnEs64HjXpEUL7d=V0CXiAXcNw@mail.gmail.com/ Reported-by: Masahiro Yamada Debugged-by: Sami Tolvanen Signed-off-by: Jakub Kicinski Signed-off-by: Nick Desaulniers Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

tpm: Unify the mismatching TPM space buffer sizes

2020-08-19T06:24:12Z

commit 6c4e79d99e6f42b79040f1a33cd4018f5425030b upstream. The size of the buffers for storing context's and sessions can vary from arch to arch as PAGE_SIZE can be anything between 4 kB and 256 kB (the maximum for PPC64). Define a fixed buffer size set to 16 kB. This should be enough for most use with three handles (that is how many we allow at the moment). Parametrize the buffer size while doing this, so that it is easier to revisit this later on if required. Cc: stable@vger.kernel.org Reported-by: Stefan Berger Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces") Reviewed-by: Jerry Snitselaar Tested-by: Stefan Berger Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

gpio: don't use same lockdep class for all devm_gpiochip_add_data users

2020-08-19T06:24:08Z

[ Upstream commit 5f402bb17533113c21d61c2d4bc4ef4a6fa1c9a5 ] Commit 959bc7b22bd2 ("gpio: Automatically add lockdep keys") documents in its commits message its intention to "create a unique class key for each driver". It does so by having gpiochip_add_data add in-place the definition of two static lockdep classes for LOCKDEP use. That way, every caller of the macro adds their gpiochip with unique lockdep classes. There are many indirect callers of gpiochip_add_data, however, via use of devm_gpiochip_add_data. devm_gpiochip_add_data has external linkage and all its users will share the same lockdep classes, which probably is not intended. Fix this by replicating the gpio_chip_add_data statics-in-macro for the devm_ version as well. Fixes: 959bc7b22bd2 ("gpio: Automatically add lockdep keys") Signed-off-by: Ahmad Fatoum Reviewed-by: Andy Shevchenko Reviewed-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20200731123835.8003-1-a.fatoum@pengutronix.de Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

tpm: Require that all digests are present in TCG_PCR_EVENT2 structures

2020-08-19T06:23:30Z

[ Upstream commit 7f3d176f5f7e3f0477bf82df0f600fcddcdcc4e4 ] Require that the TCG_PCR_EVENT2.digests.count value strictly matches the value of TCG_EfiSpecIdEvent.numberOfAlgorithms in the event field of the TCG_PCClientPCREvent event log header. Also require that TCG_EfiSpecIdEvent.numberOfAlgorithms is non-zero. The TCG PC Client Platform Firmware Profile Specification section 9.1 (Family "2.0", Level 00 Revision 1.04) states: For each Hash algorithm enumerated in the TCG_PCClientPCREvent entry, there SHALL be a corresponding digest in all TCG_PCR_EVENT2 structures. Note: This includes EV_NO_ACTION events which do not extend the PCR. Section 9.4.5.1 provides this description of TCG_EfiSpecIdEvent.numberOfAlgorithms: The number of Hash algorithms in the digestSizes field. This field MUST be set to a value of 0x01 or greater. Enforce these restrictions, as required by the above specification, in order to better identify and ignore invalid sequences of bytes at the end of an otherwise valid TPM2 event log. Firmware doesn't always have the means necessary to inform the kernel of the actual event log size so the kernel's event log parsing code should be stringent when parsing the event log for resiliency against firmware bugs. This is true, for example, when firmware passes the event log to the kernel via a reserved memory region described in device tree. POWER and some ARM systems use the "linux,sml-base" and "linux,sml-size" device tree properties to describe the memory region used to pass the event log from firmware to the kernel. Unfortunately, the "linux,sml-size" property describes the size of the entire reserved memory region rather than the size of the event long within the memory region and the event log format does not include information describing the size of the event log. tpm_read_log_of(), in drivers/char/tpm/eventlog/of.c, is where the "linux,sml-size" property is used. At the end of that function, log->bios_event_log_end is pointing at the end of the reserved memory region. That's typically 0x10000 bytes offset from "linux,sml-base", depending on what's defined in the device tree source. The firmware event log only fills a portion of those 0x10000 bytes and the rest of the memory region should be zeroed out by firmware. Even in the case of a properly zeroed bytes in the remainder of the memory region, the only thing allowing the kernel's event log parser to detect the end of the event log is the following conditional in __calc_tpm2_event_size(): if (event_type == 0 && event_field->event_size == 0) size = 0; If that wasn't there, __calc_tpm2_event_size() would think that a 16 byte sequence of zeroes, following an otherwise valid event log, was a valid event. However, problems can occur if a single bit is set in the offset corresponding to either the TCG_PCR_EVENT2.eventType or TCG_PCR_EVENT2.eventSize fields, after the last valid event log entry. This could confuse the parser into thinking that an additional entry is present in the event log and exposing this invalid entry to userspace in the /sys/kernel/security/tpm0/binary_bios_measurements file. Such problems have been seen if firmware does not fully zero the memory region upon a warm reboot. This patch significantly raises the bar on how difficult it is for stale/invalid memory to confuse the kernel's event log parser but there's still, ultimately, a reliance on firmware to properly initialize the remainder of the memory region reserved for the event log as the parser cannot be expected to detect a stale but otherwise properly formatted firmware event log entry. Fixes: fd5c78694f3f ("tpm: fix handling of the TPM 2.0 event logs") Signed-off-by: Tyler Hicks Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin

tracepoint: Mark __tracepoint_string's __used

2020-08-19T06:23:24Z

commit f3751ad0116fb6881f2c3c957d66a9327f69cefb upstream. __tracepoint_string's have their string data stored in .rodata, and an address to that data stored in the "__tracepoint_str" section. Functions that refer to those strings refer to the symbol of the address. Compiler optimization can replace those address references with references directly to the string data. If the address doesn't appear to have other uses, then it appears dead to the compiler and is removed. This can break the /tracing/printk_formats sysfs node which iterates the addresses stored in the "__tracepoint_str" section. Like other strings stored in custom sections in this header, mark these __used to inform the compiler that there are other non-obvious users of the address, so they should still be emitted. Link: https://lkml.kernel.org/r/20200730224555.2142154-2-ndesaulniers@google.com Cc: Ingo Molnar Cc: Miguel Ojeda Cc: stable@vger.kernel.org Fixes: 102c9323c35a8 ("tracing: Add __tracepoint_string() to export string pointers") Reported-by: Tim Murray Reported-by: Simon MacMullen Suggested-by: Greg Hackmann Signed-off-by: Nick Desaulniers Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct

2020-08-11T13:35:41Z

[ Upstream commit 038ebb1a713d114d54dbf14868a73181c0c92758 ] When openvswitch conntrack offload with act_ct action. Fragment packets defrag in the ingress tc act_ct action and miss the next chain. Then the packet pass to the openvswitch datapath without the mru. The over mtu packet will be dropped in output action in openvswitch for over mtu. "kernel: net2: dropped over-mtu packet: 1528 > 1500" This patch add mru in the tc_skb_ext for adefrag and miss next chain situation. And also add mru in the qdisc_skb_cb. The act_ct set the mru to the qdisc_skb_cb when the packet defrag. And When the chain miss, The mru is set to tc_skb_ext which can be got by ovs datapath. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: wenxu Reviewed-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman