kernel/include/linux, branch linux-3.3.y

mmc: sdio: avoid spurious calls to interrupt handlers

2012-06-01T07:15:53Z

commit bbbc4c4d8c5face097d695f9bf3a39647ba6b7e7 upstream. Commit 06e8935feb ("optimized SDIO IRQ handling for single irq") introduced some spurious calls to SDIO function interrupt handlers, such as when the SDIO IRQ thread is started, or the safety check performed upon a system resume. Let's add a flag to perform the optimization only when a real interrupt is signaled by the host driver and we know there is no point confirming it. Reported-by: Sujit Reddy Thumma Signed-off-by: Nicolas Pitre Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

usbhid: prevent deadlock during timeout

2012-06-01T07:15:44Z

commit 8815bb09af21316aeb5f8948b24ac62181670db2 upstream. On some HCDs usb_unlink_urb() can directly call the completion handler. That limits the spinlocks that can be taken in the handler to locks not held while calling usb_unlink_urb() To prevent a race with resubmission, this patch exposes usbcore's infrastructure for blocking submission, uses it and so drops the lock without causing a race in usbhid. Signed-off-by: Oliver Neukum Acked-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

block: don't mark buffers beyond end of disk as mapped

2012-06-01T07:15:39Z

commit 080399aaaf3531f5b8761ec0ac30ff98891e8686 upstream. Hi, We have a bug report open where a squashfs image mounted on ppc64 would exhibit errors due to trying to read beyond the end of the disk. It can easily be reproduced by doing the following: [root@ibm-p750e-02-lp3 ~]# ls -l install.img -rw-r--r-- 1 root root 142032896 Apr 30 16:46 install.img [root@ibm-p750e-02-lp3 ~]# mount -o loop ./install.img /mnt/test [root@ibm-p750e-02-lp3 ~]# dd if=/dev/loop0 of=/dev/null dd: reading `/dev/loop0': Input/output error 277376+0 records in 277376+0 records out 142016512 bytes (142 MB) copied, 0.9465 s, 150 MB/s In dmesg, you'll find the following: squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 43.106012] attempt to access beyond end of device [ 43.106029] loop0: rw=0, want=277410, limit=277408 [ 43.106039] Buffer I/O error on device loop0, logical block 138704 [ 43.106053] attempt to access beyond end of device [ 43.106057] loop0: rw=0, want=277412, limit=277408 [ 43.106061] Buffer I/O error on device loop0, logical block 138705 [ 43.106066] attempt to access beyond end of device [ 43.106070] loop0: rw=0, want=277414, limit=277408 [ 43.106073] Buffer I/O error on device loop0, logical block 138706 [ 43.106078] attempt to access beyond end of device [ 43.106081] loop0: rw=0, want=277416, limit=277408 [ 43.106085] Buffer I/O error on device loop0, logical block 138707 [ 43.106089] attempt to access beyond end of device [ 43.106093] loop0: rw=0, want=277418, limit=277408 [ 43.106096] Buffer I/O error on device loop0, logical block 138708 [ 43.106101] attempt to access beyond end of device [ 43.106104] loop0: rw=0, want=277420, limit=277408 [ 43.106108] Buffer I/O error on device loop0, logical block 138709 [ 43.106112] attempt to access beyond end of device [ 43.106116] loop0: rw=0, want=277422, limit=277408 [ 43.106120] Buffer I/O error on device loop0, logical block 138710 [ 43.106124] attempt to access beyond end of device [ 43.106128] loop0: rw=0, want=277424, limit=277408 [ 43.106131] Buffer I/O error on device loop0, logical block 138711 [ 43.106135] attempt to access beyond end of device [ 43.106139] loop0: rw=0, want=277426, limit=277408 [ 43.106143] Buffer I/O error on device loop0, logical block 138712 [ 43.106147] attempt to access beyond end of device [ 43.106151] loop0: rw=0, want=277428, limit=277408 [ 43.106154] Buffer I/O error on device loop0, logical block 138713 [ 43.106158] attempt to access beyond end of device [ 43.106162] loop0: rw=0, want=277430, limit=277408 [ 43.106166] attempt to access beyond end of device [ 43.106169] loop0: rw=0, want=277432, limit=277408 ... [ 43.106307] attempt to access beyond end of device [ 43.106311] loop0: rw=0, want=277470, limit=2774 Squashfs manages to read in the end block(s) of the disk during the mount operation. Then, when dd reads the block device, it leads to block_read_full_page being called with buffers that are beyond end of disk, but are marked as mapped. Thus, it would end up submitting read I/O against them, resulting in the errors mentioned above. I fixed the problem by modifying init_page_buffers to only set the buffer mapped if it fell inside of i_size. Cheers, Jeff Signed-off-by: Jeff Moyer Acked-by: Nick Piggin -- Changes from v1->v2: re-used max_block, as suggested by Nick Piggin. Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

block: fix buffer overflow when printing partition UUIDs

2012-06-01T07:15:39Z

commit 05c69d298c96703741cac9a5cbbf6c53bd55a6e2 upstream. 6d1d8050b4bc8 "block, partition: add partition_meta_info to hd_struct" added part_unpack_uuid() which assumes that the passed in buffer has enough space for sprintfing "%pU" - 37 characters including '\0'. Unfortunately, b5af921ec0233 "init: add support for root devices specified by partition UUID" supplied 33 bytes buffer to the function leading to the following panic with stackprotector enabled. Kernel panic - not syncing: stack-protector: Kernel stack corrupted in: ffffffff81b14c7e [] panic+0xba/0x1c6 [] ? printk_all_partitions+0x259/0x26xb [] __stack_chk_fail+0x1b/0x20 [] printk_all_paritions+0x259/0x26xb [] mount_block_root+0x1bc/0x27f [] mount_root+0x57/0x5b [] prepare_namespace+0x13d/0x176 [] ? release_tgcred.isra.4+0x330/0x30 [] kernel_init+0x155/0x15a [] ? schedule_tail+0x27/0xb0 [] kernel_thread_helper+0x5/0x10 [] ? start_kernel+0x3c5/0x3c5 [] ? gs_change+0x13/0x13 Increase the buffer size, remove the dangerous part_unpack_uuid() and use snprintf() directly from printk_all_partitions(). Signed-off-by: Tejun Heo Reported-by: Szymon Gruszczynski Cc: Will Drewry Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

usbnet: fix skb traversing races during unlink(v2)

2012-05-21T17:46:17Z

commit 5b6e9bcdeb65634b4ad604eb4536404bbfc62cfa upstream. Commit 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d(net/usbnet: avoid recursive locking in usbnet_stop()) fixes the recursive locking problem by releasing the skb queue lock before unlink, but may cause skb traversing races: - after URB is unlinked and the queue lock is released, the refered skb and skb->next may be moved to done queue, even be released - in skb_queue_walk_safe, the next skb is still obtained by next pointer of the last skb - so maybe trigger oops or other problems This patch extends the usage of entry->state to describe 'start_unlink' state, so always holding the queue(rx/tx) lock to change the state if the referd skb is in rx or tx queue because we need to know if the refered urb has been started unlinking in unlink_urbs. The other part of this patch is based on Huajun's patch: always traverse from head of the tx/rx queue to get skb which is to be unlinked but not been started unlinking. Signed-off-by: Huajun Li Signed-off-by: Ming Lei Cc: Oliver Neukum Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

hugepages: fix use after free bug in "quota" handling

2012-05-12T16:32:21Z

commit 90481622d75715bfcb68501280a917dbfe516029 upstream. hugetlbfs_{get,put}_quota() are badly named. They don't interact with the general quota handling code, and they don't much resemble its behaviour. Rather than being about maintaining limits on on-disk block usage by particular users, they are instead about maintaining limits on in-memory page usage (including anonymous MAP_PRIVATE copied-on-write pages) associated with a particular hugetlbfs filesystem instance. Worse, they work by having callbacks to the hugetlbfs filesystem code from the low-level page handling code, in particular from free_huge_page(). This is a layering violation of itself, but more importantly, if the kernel does a get_user_pages() on hugepages (which can happen from KVM amongst others), then the free_huge_page() can be delayed until after the associated inode has already been freed. If an unmount occurs at the wrong time, even the hugetlbfs superblock where the "quota" limits are stored may have been freed. Andrew Barry proposed a patch to fix this by having hugepages, instead of storing a pointer to their address_space and reaching the superblock from there, had the hugepages store pointers directly to the superblock, bumping the reference count as appropriate to avoid it being freed. Andrew Morton rejected that version, however, on the grounds that it made the existing layering violation worse. This is a reworked version of Andrew's patch, which removes the extra, and some of the existing, layering violation. It works by introducing the concept of a hugepage "subpool" at the lower hugepage mm layer - that is a finite logical pool of hugepages to allocate from. hugetlbfs now creates a subpool for each filesystem instance with a page limit set, and a pointer to the subpool gets added to each allocated hugepage, instead of the address_space pointer used now. The subpool has its own lifetime and is only freed once all pages in it _and_ all other references to it (i.e. superblocks) are gone. subpools are optional - a NULL subpool pointer is taken by the code to mean that no subpool limits are in effect. Previous discussion of this bug found in: "Fix refcounting in hugetlbfs quota handling.". See: https://lkml.org/lkml/2011/8/11/28 or http://marc.info/?l=linux-mm&m=126928970510627&w=1 v2: Fixed a bug spotted by Hillf Danton, and removed the extra parameter to alloc_huge_page() - since it already takes the vma, it is not necessary. Signed-off-by: Andrew Barry Signed-off-by: David Gibson Cc: Hugh Dickins Cc: Mel Gorman Cc: Minchan Kim Cc: Hillf Danton Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

KVM: Ensure all vcpus are consistent with in-kernel irqchip settings

2012-05-12T16:32:20Z

(cherry picked from commit 3e515705a1f46beb1c942bb8043c16f8ac7b1e9e) If some vcpus are created before KVM_CREATE_IRQCHIP, then irqchip_in_kernel() and vcpu->arch.apic will be inconsistent, leading to potential NULL pointer dereferences. Fix by: - ensuring that no vcpus are installed when KVM_CREATE_IRQCHIP is called - ensuring that a vcpu has an apic if it is installed after KVM_CREATE_IRQCHIP This is somewhat long winded because vcpu->arch.apic is created without kvm->lock held. Based on earlier patch by Michael Ellerman. Signed-off-by: Michael Ellerman Signed-off-by: Avi Kivity Signed-off-by: Greg Kroah-Hartman

net: Fix issue with netdev_tx_reset_queue not resetting queue from XOFF state

2012-05-12T16:32:19Z

[ Upstream commit 5c4903549c05bbb373479e0ce2992573c120654a ] We are seeing dev_watchdog hangs on several drivers. I suspect this is due to the __QUEUE_STATE_STACK_XOFF bit being set prior to a reset for link change, and then not being cleared by netdev_tx_reset_queue. This change corrects that. In addition we were seeing dev_watchdog hangs on igb after running the ethtool tests. We found this to be due to the fact that the ethtool test runs the same logic as ndo_start_xmit, but we were never clearing the XOFF flag since the loopback test in ethtool does not do byte queue accounting. Signed-off-by: Alexander Duyck Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher Signed-off-by: Greg Kroah-Hartman

net: Add memory barriers to prevent possible race in byte queue limits

2012-05-12T16:32:19Z

[ Upstream commit b37c0fbe3f6dfba1f8ad2aed47fb40578a254635 ] This change adds a memory barrier to the byte queue limit code to address a possible race as has been seen in the past with the netif_stop_queue/netif_wake_queue logic. Signed-off-by: Alexander Duyck Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher Signed-off-by: Greg Kroah-Hartman

Fix __read_seqcount_begin() to use ACCESS_ONCE for sequence value read

2012-05-12T16:32:05Z

commit 2f624278626677bfaf73fef97f86b37981621f5c upstream. We really need to use a ACCESS_ONCE() on the sequence value read in __read_seqcount_begin(), because otherwise the compiler might end up reloading the value in between the test and the return of it. As a result, it might end up returning an odd value (which means that a write is in progress). If the reader is then fast enough that that odd value is still the current one when the read_seqcount_retry() is done, we might end up with a "successful" read sequence, even despite the concurrent write being active. In practice this probably never really happens - there just isn't anything else going on around the read of the sequence count, and the common case is that we end up having a read barrier immediately afterwards. So the code sequence in which gcc might decide to reaload from memory is small, and there's no reason to believe it would ever actually do the reload. But if the compiler ever were to decide to do so, it would be incredibly annoying to debug. Let's just make sure. Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman