kernel/include/linux/sunrpc/rpc_pipe_fs.h, branch linux-5.11.y

sunrpc: remove KERNEL ifdefs

2019-11-12T16:43:29Z

Remove the __KERNEL__ ifdefs from the non-UAPI sunrpc headers, as those can't be included from user space programs. Signed-off-by: Christoph Hellwig Signed-off-by: J. Bruce Fields

remove rpc_rmdir()

2018-04-16T18:20:26Z

no users since 2014... Signed-off-by: Al Viro

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

sunrpc: replace sunrpc_net->gssd_running flag with a more reliable check

2013-12-06T18:06:31Z

Now that we have a more reliable method to tell if gssd is running, we can replace the sn->gssd_running flag with a function that will query to see if it's up and running. There's also no need to attempt an upcall that we know will fail, so just return -EACCES if gssd isn't running. Finally, fix the warn_gss() message not to claim that that the upcall timed out since we don't necesarily perform one now when gssd isn't running, and remove the extraneous newline from the message. Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust

sunrpc: create a new dummy pipe for gssd to hold open

2013-12-06T18:06:30Z

rpc.gssd will naturally hold open any pipe named */clnt*/gssd that shows up under rpc_pipefs. That behavior gives us a reliable mechanism to tell whether it's actually running or not. Create a new toplevel "gssd" directory in rpc_pipefs when it's mounted. Under that directory create another directory called "clntXX", and then within that a pipe called "gssd". We'll never send an upcall along that pipe, and any downcall written to it will just return -EINVAL. Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust

SUNRPC: Add a helper to allow sharing of rpc_pipefs directory objects

2013-09-01T15:12:43Z

Add support for looking up existing objects and creating new ones if there is no match. Signed-off-by: Trond Myklebust

SUNRPC: Remove the rpc_client->cl_dentry

2013-09-01T15:12:42Z

It is now redundant. Signed-off-by: Trond Myklebust

SUNRPC: Add a framework to clean up management of rpc_pipefs directories

2013-08-30T13:19:38Z

The current system requires everyone to set up notifiers, manage directory locking, etc. What we really want to do is have the rpc_client create its directory, and then create all the entries. This patch will allow the RPCSEC_GSS and NFS code to register all the objects that they want to have appear in the directory, and then have the sunrpc code call them back to actually create/destroy their pipefs dentries when the rpc_client creates/destroys the parent. Signed-off-by: Trond Myklebust

rpc_create_*_dir: don't bother with qstr

2013-07-14T13:02:28Z

just pass the name Signed-off-by: Al Viro

SUNRPC: move waitq from RPC pipe to RPC inode

2012-02-27T18:37:48Z

Currently, wait queue, used for polling of RPC pipe changes from user-space, is a part of RPC pipe. But the pipe data itself can be released on NFS umount prior to dentry-inode pair, connected to it (is case of this pair is open by some process). This is not a problem for almost all pipe users, because all PipeFS file operations checks pipe reference prior to using it. Except evenfd. This thing registers itself with "poll" file operation and thus has a reference to pipe wait queue. This leads to oopses on destroying eventfd after NFS umount (like rpc_idmapd do) since not pipe data left to the point already. The solution is to wait queue from pipe data to internal RPC inode data. This looks more logical, because this wiat queue used only for user-space processes, which already holds inode reference. Note: upcalls have to get pipe->dentry prior to dereferecing wait queue to make sure, that mount point won't disappear from underneath us. Signed-off-by: Stanislav Kinsbursky Signed-off-by: Trond Myklebust