kernel/include/linux/soc/mediatek/mtk_wed.h, branch linux-6.18.y

wifi: mt76: wed: use proper wed reference in mt76 wed driver callabacks

2025-12-18T13:03:13Z

[ Upstream commit 385aab8fccd7a8746b9f1a17f3c1e38498a14bc7 ] MT7996 driver can use both wed and wed_hif2 devices to offload traffic from/to the wireless NIC. In the current codebase we assume to always use the primary wed device in wed callbacks resulting in the following crash if the hw runs wed_hif2 (e.g. 6GHz link). [ 297.455876] Unable to handle kernel read from unreadable memory at virtual address 000000000000080a [ 297.464928] Mem abort info: [ 297.467722] ESR = 0x0000000096000005 [ 297.471461] EC = 0x25: DABT (current EL), IL = 32 bits [ 297.476766] SET = 0, FnV = 0 [ 297.479809] EA = 0, S1PTW = 0 [ 297.482940] FSC = 0x05: level 1 translation fault [ 297.487809] Data abort info: [ 297.490679] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 297.496156] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 297.501196] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 297.506500] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000107480000 [ 297.512927] [000000000000080a] pgd=08000001097fb003, p4d=08000001097fb003, pud=08000001097fb003, pmd=0000000000000000 [ 297.523532] Internal error: Oops: 0000000096000005 [#1] SMP [ 297.715393] CPU: 2 UID: 0 PID: 45 Comm: kworker/u16:2 Tainted: G O 6.12.50 #0 [ 297.723908] Tainted: [O]=OOT_MODULE [ 297.727384] Hardware name: Banana Pi BPI-R4 (2x SFP+) (DT) [ 297.732857] Workqueue: nf_ft_offload_del nf_flow_rule_route_ipv6 [nf_flow_table] [ 297.740254] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 297.747205] pc : mt76_wed_offload_disable+0x64/0xa0 [mt76] [ 297.752688] lr : mtk_wed_flow_remove+0x58/0x80 [ 297.757126] sp : ffffffc080fe3ae0 [ 297.760430] x29: ffffffc080fe3ae0 x28: ffffffc080fe3be0 x27: 00000000deadbef7 [ 297.767557] x26: ffffff80c5ebca00 x25: 0000000000000001 x24: ffffff80c85f4c00 [ 297.774683] x23: ffffff80c1875b78 x22: ffffffc080d42cd0 x21: ffffffc080660018 [ 297.781809] x20: ffffff80c6a076d0 x19: ffffff80c6a043c8 x18: 0000000000000000 [ 297.788935] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000000 [ 297.796060] x14: 0000000000000019 x13: ffffff80c0ad8ec0 x12: 00000000fa83b2da [ 297.803185] x11: ffffff80c02700c0 x10: ffffff80c0ad8ec0 x9 : ffffff81fef96200 [ 297.810311] x8 : ffffff80c02700c0 x7 : ffffff80c02700d0 x6 : 0000000000000002 [ 297.817435] x5 : 0000000000000400 x4 : 0000000000000000 x3 : 0000000000000000 [ 297.824561] x2 : 0000000000000001 x1 : 0000000000000800 x0 : ffffff80c6a063c8 [ 297.831686] Call trace: [ 297.834123] mt76_wed_offload_disable+0x64/0xa0 [mt76] [ 297.839254] mtk_wed_flow_remove+0x58/0x80 [ 297.843342] mtk_flow_offload_cmd+0x434/0x574 [ 297.847689] mtk_wed_setup_tc_block_cb+0x30/0x40 [ 297.852295] nf_flow_offload_ipv6_hook+0x7f4/0x964 [nf_flow_table] [ 297.858466] nf_flow_rule_route_ipv6+0x438/0x4a4 [nf_flow_table] [ 297.864463] process_one_work+0x174/0x300 [ 297.868465] worker_thread+0x278/0x430 [ 297.872204] kthread+0xd8/0xdc [ 297.875251] ret_from_fork+0x10/0x20 [ 297.878820] Code: 928b5ae0 8b000273 91400a60 f943fa61 (79401421) [ 297.884901] ---[ end trace 0000000000000000 ]--- Fix the issue detecting the proper wed reference to use running wed callabacks. Fixes: 83eafc9251d6 ("wifi: mt76: mt7996: add wed tx support") Tested-by: Daniel Pawlik Tested-by: Matteo Croce Signed-off-by: Lorenzo Bianconi Link: https://patch.msgid.link/20251008-wed-fixes-v1-1-8f7678583385@kernel.org Signed-off-by: Felix Fietkau Signed-off-by: Sasha Levin

net: mediatek: wed: Introduce MT7992 WED support to MT7988 SoC

2025-08-14T00:06:55Z

Introduce the second WDMA RX ring in WED driver for MT7988 SoC since the Mediatek MT7992 WiFi chipset supports two separated WDMA rings. Add missing MT7988 configurations to properly support WED for MT7992 in MT76 driver. Co-developed-by: Rex Lu Signed-off-by: Rex Lu Signed-off-by: Lorenzo Bianconi Link: https://patch.msgid.link/20250812-mt7992-wed-support-v3-1-9ada78a819a4@kernel.org Signed-off-by: Jakub Kicinski

net: ethernet: mtk_wed: annotate RCU release in attach()

2025-04-25T01:22:05Z

There are some sparse warnings in wifi, and it seems that it's actually possible to annotate a function pointer with __releases(), making the sparse warnings go away. In a way that also serves as documentation that rcu_read_unlock() must be called in the attach method, so add that annotation. Signed-off-by: Johannes Berg Link: https://patch.msgid.link/20250423150811.456205-2-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski

net: ethernet: mtk_wed: introduce hw_rro support for MT7988

2023-09-19T16:27:56Z

MT7988 SoC support 802.11 receive reordering offload in hw while MT7986 SoC implements it through the firmware running on the mcu. Co-developed-by: Lorenzo Bianconi Signed-off-by: Lorenzo Bianconi Signed-off-by: Sujuan Chen Signed-off-by: Paolo Abeni

net: ethernet: mtk_wed: introduce partial AMSDU offload support for MT7988

2023-09-19T16:27:56Z

Introduce partial AMSDU offload support for MT7988 SoC in order to merge in hw packets belonging to the same AMSDU before passing them to the WLAN nic. Co-developed-by: Lorenzo Bianconi Signed-off-by: Lorenzo Bianconi Signed-off-by: Sujuan Chen Signed-off-by: Paolo Abeni

net: ethernet: mtk_wed: introduce WED support for MT7988

2023-09-19T16:27:56Z

Similar to MT7986 and MT7622, enable Wireless Ethernet Ditpatcher for MT7988 in order to offload traffic forwarded from LAN/WLAN to WLAN/LAN Co-developed-by: Lorenzo Bianconi Signed-off-by: Lorenzo Bianconi Signed-off-by: Sujuan Chen Signed-off-by: Paolo Abeni

net: ethernet: mtk_wed: introduce mtk_wed_buf structure

2023-09-19T16:27:55Z

Introduce mtk_wed_buf structure to store both virtual and physical addresses allocated in mtk_wed_tx_buffer_alloc() routine. This is a preliminary patch to add WED support for MT7988 SoC since it relies on a different dma descriptor layout not storing page dma addresses. Co-developed-by: Sujuan Chen Signed-off-by: Sujuan Chen Signed-off-by: Lorenzo Bianconi Signed-off-by: Paolo Abeni

net: ethernet: mtk_wed: rename mtk_rxbm_desc in mtk_wed_bm_desc

2023-09-19T16:27:55Z

Rename mtk_rxbm_desc structure in mtk_wed_bm_desc since it will be used even on tx side by MT7988 SoC. Signed-off-by: Lorenzo Bianconi Signed-off-by: Paolo Abeni

net: ethernet: mtk_eth_soc: add code for offloading flows from wlan devices

2023-04-07T07:23:08Z

WED version 2 (on MT7986 and later) can offload flows originating from wireless devices. In order to make that work, ndo_setup_tc needs to be implemented on the netdevs. This adds the required code to offload flows coming in from WED, while keeping track of the incoming wed index used for selecting the correct PPE device. Signed-off-by: Felix Fietkau Reviewed-by: Simon Horman Signed-off-by: David S. Miller

Merge tag 'wireless-next-2023-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

2023-01-24T05:27:31Z

Kalle Valo says: ==================== wireless-next patches for v6.3 First set of patches for v6.3. The most important change here is that the old Wireless Extension user space interface is not supported on Wi-Fi 7 devices at all. We also added a warning if anyone with modern drivers (ie. cfg80211 and mac80211 drivers) tries to use Wireless Extensions, everyone should switch to using nl80211 interface instead. Static WEP support is removed, there wasn't any driver using that anyway so there's no user impact. Otherwise it's smaller features and fixes as usual. Note: As mt76 had tricky conflicts due to the fixes in wireless tree, we decided to merge wireless into wireless-next to solve them easily. There should not be any merge problems anymore. Major changes: cfg80211 - remove never used static WEP support - warn if Wireless Extention interface is used with cfg80211/mac80211 drivers - stop supporting Wireless Extensions with Wi-Fi 7 devices - support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting rfkill - add GPIO DT support bitfield - add FIELD_PREP_CONST() mt76 - per-PHY LED support rtw89 - support new Bluetooth co-existance version rtl8xxxu - support RTL8188EU * tag 'wireless-next-2023-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (123 commits) wifi: wireless: deny wireless extensions on MLO-capable devices wifi: wireless: warn on most wireless extension usage wifi: mac80211: drop extra 'e' from ieeee80211... name wifi: cfg80211: Deduplicate certificate loading bitfield: add FIELD_PREP_CONST() wifi: mac80211: add kernel-doc for EHT structure mac80211: support minimal EHT rate reporting on RX wifi: mac80211: Add HE MU-MIMO related flags in ieee80211_bss_conf wifi: mac80211: Add VHT MU-MIMO related flags in ieee80211_bss_conf wifi: cfg80211: Use MLD address to indicate MLD STA disconnection wifi: cfg80211: Support 32 bytes KCK key in GTK rekey offload wifi: cfg80211: Fix extended KCK key length check in nl80211_set_rekey_data() wifi: cfg80211: remove support for static WEP wifi: rtl8xxxu: Dump the efuse only for untested devices wifi: rtl8xxxu: Print the ROM version too wifi: rtw88: Use non-atomic sta iterator in rtw_ra_mask_info_update() wifi: rtw88: Use rtw_iterate_vifs() for rtw_vif_watch_dog_iter() wifi: rtw88: Move register access from rtw_bf_assoc() outside the RCU wifi: rtl8xxxu: Use a longer retry limit of 48 wifi: rtl8xxxu: Report the RSSI to the firmware ... ==================== Link: https://lore.kernel.org/r/20230123103338.330CBC433EF@smtp.kernel.org Signed-off-by: Jakub Kicinski