kernel/include/linux/soc/mediatek/mtk-mmsys.h, branch linux-6.18.y

soc: mediatek: Support MT8188 VDOSYS1 Padding in mtk-mmsys

2023-12-11T10:36:12Z

- Add Padding components - Add Mutex module definitions for Padding Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Hsiao Chien Sung Signed-off-by: AngeloGioacchino Del Regno

soc: mediatek: remove DDP_DOMPONENT_DITHER from enum

2023-06-09T14:40:29Z

After mmsys and drm change DITHER enum to DDP_COMPONENT_DITHER0, mmsys header can remove the useless DDP_COMPONENT_DITHER enum. Signed-off-by: Jason-JH.Lin Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Rex-BC Chen Acked-by: Matthias Brugger Link: https://lore.kernel.org/r/20230306080659.15261-3-jason-jh.lin@mediatek.com Signed-off-by: Matthias Brugger

soc: mediatek: mmsys: add config api for RSZ switching and DCM

2023-03-06T13:35:44Z

Due to MT8195 HW design, some RSZs have additional settings that need to be configured in MMSYS. Signed-off-by: Roy-CW.Yeh Signed-off-by: Moudy Ho Reviewed-by: AngeloGioacchino Del Regno Change-Id: I41978bf14951221c88abbe70d8c24cb0770e11e3 Link: https://lore.kernel.org/r/20230206091109.1324-5-moudy.ho@mediatek.com Signed-off-by: Matthias Brugger

soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1

2023-01-25T15:05:15Z

Add cmdq support for mtk-mmsys config API. The mmsys config register settings need to take effect with the other HW settings(like OVL_ADAPTOR...) at the same vblanking time. If we use CPU to write the mmsys reg, we can't guarantee all the settings can be written in the same vblanking time. Cmdq is used for this purpose. We prepare all the related HW settings in one cmdq packet. The first command in the packet is "wait stream done", and then following with all the HW settings. After the cmdq packet is flush to GCE HW. The GCE waits for the "stream done event" to coming and then starts flushing all the HW settings. This can guarantee all the settings flush in the same vblanking. Signed-off-by: Nancy.Lin Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: CK Hu Tested-by: AngeloGioacchino Del Regno Tested-by: Bo-Chen Chen Link: https://lore.kernel.org/r/20230113104434.28023-8-nancy.lin@mediatek.com Signed-off-by: Matthias Brugger

soc: mediatek: add mtk-mmsys config API for mt8195 vdosys1

2023-01-25T15:05:15Z

Add four mmsys config APIs. The config APIs are used for config mmsys reg. Some mmsys regs need to be set according to the HW engine binding to the mmsys simultaneously. 1. mtk_mmsys_merge_async_config: config merge async width/height. async is used for cross-clock domain synchronization. 2. mtk_mmsys_hdr_confing: config hdr backend async width/height. 3. mtk_mmsys_mixer_in_config and mtk_mmsys_mixer_in_config: config mixer related settings. Signed-off-by: Nancy.Lin Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: CK Hu Tested-by: AngeloGioacchino Del Regno Tested-by: Bo-Chen Chen Link: https://lore.kernel.org/r/20230113104434.28023-7-nancy.lin@mediatek.com Signed-off-by: Matthias Brugger

soc: mediatek: add mtk-mmsys ethdr and mdp_rdma components

2023-01-25T15:05:14Z

Add new mmsys component: ethdr_mixer and mdp_rdma. These components will use in mt8195 vdosys1. Signed-off-by: Nancy.Lin Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: CK Hu Tested-by: AngeloGioacchino Del Regno Tested-by: Bo-Chen Chen Link: https://lore.kernel.org/r/20230113104434.28023-4-nancy.lin@mediatek.com Signed-off-by: Matthias Brugger

soc: mediatek: Add all settings to mtk_mmsys_ddp_dpi_fmt_config func

2022-11-08T18:25:30Z

The difference between MT8186 and other ICs is that when modifying the output format, we need to modify the mmsys_base+0x400 register to take effect. So when setting the dpi output format, we need to call mtk_mmsys_ddp_dpi_fmt_config to set it to MT8186 synchronously. Commit a071e52f75d1 ("soc: mediatek: Add mmsys func to adapt to dpi output for MT8186") lacked some of the possible output formats and also had a wrong bitmask. Add the missing output formats and fix the bitmask. While at it, also update mtk_mmsys_ddp_dpi_fmt_config() to use generic formats, so that it is slightly easier to extend for other platforms. Fixes: a071e52f75d1 ("soc: mediatek: Add mmsys func to adapt to dpi output for MT8186") Signed-off-by: Xinlei Lee Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: CK Hu Reviewed-by: Nícolas F. R. A. Prado Signed-off-by: Matthias Brugger

soc: mediatek: Add mmsys func to adapt to dpi output for MT8186

2022-09-15T21:50:28Z

Add mmsys func to manipulate dpi output format config for MT8186. Co-developed-by: Jitao Shi Signed-off-by: Jitao Shi Signed-off-by: Xinlei Lee Reviewed-by: Nís F. R. A. Prado Link: https://lore.kernel.org/all/1663161662-1598-2-git-send-email-xinlei.lee@mediatek.com/ Signed-off-by: Matthias Brugger

soc: mediatek: add DDP_DOMPONENT_DITHER0 enum for mt8195 vdosys0

2022-04-22T12:38:53Z

The mmsys routing table of mt8195 vdosys0 has 2 DITHER components, so mmsys need to add DDP_COMPONENT_DITHER1 and change all usages of DITHER enum form DDP_COMPONENT_DITHER to DDP_COMPONENT_DITHER0. But its header need to keep DDP_COMPONENT_DITHER enum until drm/mediatek also changed it. Signed-off-by: jason-jh.lin Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Rex-BC Chen Link: https://lore.kernel.org/r/20220419094143.9561-7-jason-jh.lin@mediatek.com Signed-off-by: Matthias Brugger

soc: mediatek: add mtk-mmsys support for mt8195 vdosys0

2022-04-22T12:38:52Z

1. Add mt8195 mmsys compatible for 2 vdosys. 2. Add io_start into each driver data of mt8195 vdosys. 3. Add get match data function to identify mmsys by io_start. 4. Add mt8195 routing table settings of vdosys0. Signed-off-by: jason-jh.lin Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Rex-BC Chen Reviewed-by: CK Hu Link: https://lore.kernel.org/r/20220419094143.9561-2-jason-jh.lin@mediatek.com Signed-off-by: Matthias Brugger