kernel/include/linux/sched, branch linux-4.15.y

mm, oom_reaper: fix memory corruption

2017-12-15T00:00:49Z

David Rientjes has reported the following memory corruption while the oom reaper tries to unmap the victims address space BUG: Bad page map in process oom_reaper pte:6353826300000000 pmd:00000000 addr:00007f50cab1d000 vm_flags:08100073 anon_vma:ffff9eea335603f0 mapping: (null) index:7f50cab1d file: (null) fault: (null) mmap: (null) readpage: (null) CPU: 2 PID: 1001 Comm: oom_reaper Call Trace: unmap_page_range+0x1068/0x1130 __oom_reap_task_mm+0xd5/0x16b oom_reaper+0xff/0x14c kthread+0xc1/0xe0 Tetsuo Handa has noticed that the synchronization inside exit_mmap is insufficient. We only synchronize with the oom reaper if tsk_is_oom_victim which is not true if the final __mmput is called from a different context than the oom victim exit path. This can trivially happen from context of any task which has grabbed mm reference (e.g. to read /proc// file which requires mm etc.). The race would look like this oom_reaper oom_victim task mmget_not_zero do_exit mmput __oom_reap_task_mm mmput __mmput exit_mmap remove_vma unmap_page_range Fix this issue by providing a new mm_is_oom_victim() helper which operates on the mm struct rather than a task. Any context which operates on a remote mm struct should use this helper in place of tsk_is_oom_victim. The flag is set in mark_oom_victim and never cleared so it is stable in the exit_mmap path. Debugged by Tetsuo Handa. Link: http://lkml.kernel.org/r/20171210095130.17110-1-mhocko@kernel.org Fixes: 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently") Signed-off-by: Michal Hocko Reported-by: David Rientjes Acked-by: David Rientjes Cc: Tetsuo Handa Cc: Andrea Argangeli Cc: [4.14] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

2017-11-15T22:29:44Z

Pull cgroup updates from Tejun Heo: "Cgroup2 cpu controller support is finally merged. - Basic cpu statistics support to allow monitoring by default without the CPU controller enabled. - cgroup2 cpu controller support. - /sys/kernel/cgroup files to help dealing with new / optional features" * 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: export list of cgroups v2 features using sysfs cgroup: export list of delegatable control files using sysfs cgroup: mark @cgrp __maybe_unused in cpu_stat_show() MAINTAINERS: relocate cpuset.c cgroup, sched: Move basic cpu stats from cgroup.stat to cpu.stat sched: Implement interface for cgroup unified hierarchy sched: Misc preps for cgroup unified hierarchy interface sched/cputime: Add dummy cputime_adjust() implementation for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE cgroup: statically initialize init_css_set->dfl_cgrp cgroup: Implement cgroup2 basic CPU usage accounting cpuacct: Introduce cgroup_account_cputime[_field]() sched/cputime: Expose cputime_adjust()

Merge branch 'linus' into sched/core, to pick up fixes

2017-11-08T09:17:15Z

Signed-off-by: Ingo Molnar

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

sched/sysctl: Fix attributes of some extern declarations

2017-11-01T08:36:17Z

The definition of sysctl_sched_migration_cost, sysctl_sched_nr_migrate and sysctl_sched_time_avg includes the attribute const_debug. This attribute is not part of the extern declaration of these variables in include/linux/sched/sysctl.h, while it is in kernel/sched/sched.h, and as a result Clang generates warnings like this: kernel/sched/sched.h:1618:33: warning: section attribute is specified on redeclared variable [-Wsection] extern const_debug unsigned int sysctl_sched_time_avg; ^ ./include/linux/sched/sysctl.h:42:21: note: previous declaration is here extern unsigned int sysctl_sched_time_avg; The header only declares the variables when CONFIG_SCHED_DEBUG is defined, therefore it is not necessary to duplicate the definition of const_debug. Instead we can use the attribute __read_mostly, which is the expansion of const_debug when CONFIG_SCHED_DEBUG=y is set. Signed-off-by: Matthias Kaehlcke Reviewed-by: Nick Desaulniers Cc: Douglas Anderson Cc: Guenter Roeck Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Shile Zhang Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20171030180816.170850-1-mka@chromium.org Signed-off-by: Ingo Molnar

sched/isolation: Move isolcpus= handling to the housekeeping code

2017-10-27T07:55:30Z

We want to centralize the isolation features, to be done by the housekeeping subsystem and scheduler domain isolation is a significant part of it. No intended behaviour change, we just reuse the housekeeping cpumask and core code. Signed-off-by: Frederic Weisbecker Acked-by: Thomas Gleixner Cc: Chris Metcalf Cc: Christoph Lameter Cc: Linus Torvalds Cc: Luiz Capitulino Cc: Mike Galbraith Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Rik van Riel Cc: Wanpeng Li Link: http://lkml.kernel.org/r/1509072159-31808-11-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar

sched/isolation: Handle the nohz_full= parameter

2017-10-27T07:55:30Z

We want to centralize the isolation management, done by the housekeeping subsystem. Therefore we need to handle the nohz_full= parameter from there. Since nohz_full= so far has involved unbound timers, watchdog, RCU and tilegx NAPI isolation, we keep that default behaviour. nohz_full= will be deprecated in the future. We want to control the isolation features from the isolcpus= parameter. Signed-off-by: Frederic Weisbecker Acked-by: Thomas Gleixner Cc: Chris Metcalf Cc: Christoph Lameter Cc: Linus Torvalds Cc: Luiz Capitulino Cc: Mike Galbraith Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Rik van Riel Cc: Wanpeng Li Link: http://lkml.kernel.org/r/1509072159-31808-10-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar

sched/isolation: Introduce housekeeping flags

2017-10-27T07:55:29Z

Before we implement isolcpus under housekeeping, we need the isolation features to be more finegrained. For example some people want NOHZ_FULL without the full scheduler isolation, others want full scheduler isolation without NOHZ_FULL. So let's cut all these isolation features piecewise, at the risk of overcutting it right now. We can still merge some flags later if they always make sense together. Signed-off-by: Frederic Weisbecker Acked-by: Thomas Gleixner Cc: Chris Metcalf Cc: Christoph Lameter Cc: Linus Torvalds Cc: Luiz Capitulino Cc: Mike Galbraith Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Rik van Riel Cc: Wanpeng Li Link: http://lkml.kernel.org/r/1509072159-31808-9-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar

sched/isolation: Split out new CONFIG_CPU_ISOLATION=y config from CONFIG_NO_HZ_FULL

2017-10-27T07:55:28Z

Split the housekeeping config from CONFIG_NO_HZ_FULL. This way we finally separate the isolation code from NOHZ. Although a dependency to CONFIG_NO_HZ_FULL remains for now, while the housekeeping code still deals with NOHZ internals. Signed-off-by: Frederic Weisbecker Acked-by: Thomas Gleixner Cc: Chris Metcalf Cc: Christoph Lameter Cc: Linus Torvalds Cc: Luiz Capitulino Cc: Mike Galbraith Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Rik van Riel Cc: Wanpeng Li Link: http://lkml.kernel.org/r/1509072159-31808-8-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar

sched/isolation: Rename is_housekeeping_cpu() to housekeeping_cpu()

2017-10-27T07:55:28Z

Fit it into the housekeeping_*() namespace. Signed-off-by: Frederic Weisbecker Acked-by: Thomas Gleixner Cc: Chris Metcalf Cc: Christoph Lameter Cc: Linus Torvalds Cc: Luiz Capitulino Cc: Mike Galbraith Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Rik van Riel Cc: Wanpeng Li Link: http://lkml.kernel.org/r/1509072159-31808-7-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar