Hosts the 0x221E linux distro kernel. https://universe.0xinfinity.dev/distro/kernel/atom?h=linux-3.17.y 2014-12-06T23:57:18Z 2014-12-06T23:57:18Z Benjamin Herrenschmidt benh@kernel.crashing.org 2014-10-03T05:13:24Z urn:sha1:b1abe707d14ef7d7557f9b671d9709941cd4810a commit f144d1496b47e7450f41b767d0d91c724c2198bc upstream. This can be set by quirks/drivers to be used by the architecture code that assigns the MSI addresses. We additionally add verification in the core MSI code that the values assigned by the architecture do satisfy the limitation in order to fail gracefully if they don't (ie. the arch hasn't been updated to deal with that quirk yet). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2014-09-10T19:45:01Z Bjorn Helgaas bhelgaas@google.com 2014-09-10T19:45:01Z urn:sha1:b440bde74f043c8ec31081cb59c9a53ade954701 Powering off a hot-pluggable device, e.g., with pci_set_power_state(D3cold), normally generates a hot-remove event that unbinds the driver. Some drivers expect to remain bound to a device even while they power it off and back on again. This can be dangerous, because if the device is removed or replaced while it is powered off, the driver doesn't know that anything changed. But some drivers accept that risk. Add pci_ignore_hotplug() for use by drivers that know their device cannot be removed. Using pci_ignore_hotplug() tells the PCI core that hot-plug events for the device should be ignored. The radeon and nouveau drivers use this to switch between a low-power, integrated GPU and a higher-power, higher-performance discrete GPU. They power off the unused GPU, but they want to remain bound to it. This is a reimplementation of f244d8b623da ("ACPIPHP / radeon / nouveau: Fix VGA switcheroo problem related to hotplug") but extends it to work with both acpiphp and pciehp. This fixes a problem where systems with dual GPUs using the radeon drivers become unusable, freezing every few seconds (see bugzillas below). The resume of the radeon device may also fail, e.g., This fixes problems on dual GPU systems where the radeon driver becomes unusable because of problems while suspending the device, as in bug 79701: [drm] radeon: finishing device. radeon 0000:01:00.0: Userspace still has active objects ! radeon 0000:01:00.0: ffff8800cb4ec288 ffff8800cb4ec000 16384 4294967297 force free ... WARNING: CPU: 0 PID: 67 at /home/apw/COD/linux/drivers/gpu/drm/radeon/radeon_gart.c:234 radeon_gart_unbind+0xd2/0xe0 [radeon]() trying to unbind memory from uninitialized GART ! or while resuming it, as in bug 77261: radeon 0000:01:00.0: ring 0 stalled for more than 10158msec radeon 0000:01:00.0: GPU lockup ... radeon 0000:01:00.0: GPU pci config reset pciehp 0000:00:01.0:pcie04: Card not present on Slot(1-1) radeon 0000:01:00.0: GPU reset succeeded, trying to resume *ERROR* radeon: dpm resume failed radeon 0000:01:00.0: Wait for MC idle timedout ! Link: https://bugzilla.kernel.org/show_bug.cgi?id=77261 Link: https://bugzilla.kernel.org/show_bug.cgi?id=79701 Reported-by: Shawn Starr <shawn.starr@rogers.com> Reported-by: Jose P. <lbdkmjdf@sharklasers.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Rajat Jain <rajatxjain@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Dave Airlie <airlied@redhat.com> CC: stable@vger.kernel.org # v3.15+ 2014-08-05T00:32:24Z Linus Torvalds torvalds@linux-foundation.org 2014-08-05T00:32:24Z urn:sha1:2521129a6d2fd8a81f99cf95055eddea3df914ff Pull char / misc driver patches from Greg KH: "Here's the big driver misc / char pull request for 3.17-rc1. Lots of things in here, the thunderbolt support for Apple laptops, some other new drivers, testing fixes, and other good things. All have been in linux-next for a long time" * tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (119 commits) misc: bh1780: Introduce the use of devm_kzalloc Lattice ECP3 FPGA: Correct endianness drivers/misc/ti-st: Load firmware from ti-connectivity directory. dt-bindings: extcon: Add support for SM5502 MUIC device extcon: sm5502: Change internal hardware switch according to cable type extcon: sm5502: Detect cable state after completing platform booting extcon: sm5502: Add support new SM5502 extcon device driver extcon: arizona: Get MICVDD against extcon device extcon: Remove unnecessary OOM messages misc: vexpress: Fix sparse non static symbol warnings mei: drop unused hw dependent fw status functions misc: bh1770glc: Use managed functions pcmcia: remove DEFINE_PCI_DEVICE_TABLE usage misc: remove DEFINE_PCI_DEVICE_TABLE usage ipack: Replace DEFINE_PCI_DEVICE_TABLE macro use drivers/char/dsp56k.c: drop check for negativity of unsigned parameter mei: fix return value on disconnect timeout mei: don't schedule suspend in pm idle mei: start disconnect request timer consistently mei: reset client connection state on timeout ... 2014-07-16T23:09:47Z Bjorn Helgaas bhelgaas@google.com 2014-07-16T23:09:47Z urn:sha1:792688fde431b4fdb2cf10a6f7589a8176b6b14a * pci/host-generic: PCI: generic: Fix GPL v2 license string typo * pci/host-mvebu: PCI: mvebu: Fix GPL v2 license string typo * pci/host-rcar: PCI: rcar: Fix GPL v2 license string typo * pci/host-tegra: PCI: tegra: Fix GPL v2 license string typo * pci/msi: PCI/MSI: Use irq_get_msi_desc() to simplify code PCI/MSI: Remove unused list access in __pci_restore_msix_state() PCI/MSI: Retrieve first MSI IRQ from msi_desc rather than pci_dev PCI/MSI: Remove unused function msi_remove_pci_irq_vectors() PCI/MSI: Add msi_setup_entry() to clean up MSI initialization * pci/misc: PCI: Configure ASPM when enabling device x86: don't exclude low BIOS area when allocating address space for non-PCI cards PCI: Add include guard to include/linux/pci_ids.h x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup() * pci/resource: PCI: Tidy resource assignment messages PCI: Return conventional error values from pci_revert_fw_address() PCI: Cleanup control flow PCI: Support BAR sizes up to 128GB PCI: Keep original resource if we fail to expand it * pci/virtualization: powerpc/pci: Remove duplicate logic PCI: Make resetting secondary bus logic common 2014-07-16T20:44:20Z Yijing Wang wangyijing@huawei.com 2014-07-08T02:08:36Z urn:sha1:4cc901613bd79dfa22d8aea996c2e9f74c04f8f2 msi_remove_pci_irq_vectors() is unused, so remove it. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 2014-07-03T22:39:14Z Gavin Shan gwshan@linux.vnet.ibm.com 2014-06-19T07:22:44Z urn:sha1:9e33002fd1791bcab626b19301670484c1cb6d50 Commit d92a208d086 ("powerpc/pci: Mask linkDown on resetting PCI bus") implemented same logic (resetting PCI secondary bus by bridge's config register PCI_BRIDGE_CTL_BUS_RESET) in PCI core and arch-dependent code. To avoid the duplication, move the logic to pci_reset_secondary_bus(). That commit did not declare the pcibios_reset_secondary_bus() interface in linux/include/pci.h. Add the declaration. No functional change. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 2014-06-19T21:08:41Z Andreas Noever andreas.noever@gmail.com 2014-06-03T20:04:09Z urn:sha1:7d2a01b87f1682fde87461864e6682031bfaa0a9 Add pci_fixup_suspend_late as a new pci_fixup_pass. The pass is called from suspend_noirq and poweroff_noirq. Using the same pass for suspend and hibernate is consistent with resume_early which is called by resume_noirq and restore_noirq. The new quirk pass is required for Thunderbolt support on Apple hardware. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2014-06-02T22:18:48Z Bjorn Helgaas bhelgaas@google.com 2014-06-02T22:18:48Z urn:sha1:0eeb4f2af5f71f64ba6362df33ddc1f218075c52 * pci/iommu: PCI: Add bridge DMA alias quirk for ASMedia and Tundra bridges PCI: Add support for PCIe-to-PCI bridge DMA alias quirks PCI: Add function 1 DMA alias quirk for Marvell devices PCI: Add function 0 DMA alias quirk for Ricoh devices PCI: Add support for DMA alias quirks PCI: Convert pci_dev_flags definitions to bit shifts PCI: Add DMA alias iterator 2014-05-30T17:41:17Z Bjorn Helgaas bhelgaas@google.com 2014-05-30T17:41:17Z urn:sha1:617b4157a5c82ab3e9509aa388bfd3d47e0e623a * pci/host-exynos: PCI: exynos: Fix add_pcie_port() section mismatch warning * pci/host-imx6: PCI: imx6: Add support for MSI PCI: designware: Make MSI ISR shared IRQ aware PCI: imx6: Remove optional (and unused) IRQs PCI: imx6: Drop old IRQ mapping PCI: imx6: Use new clock names PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning * pci/resource: i82875p_edac: Assign PCI resources before adding device * pci/misc: ARM/PCI: Call pcie_bus_configure_settings() to set MPS PCI: Make pci_bus_add_device() void Conflicts: drivers/edac/i82875p_edac.c 2014-05-30T15:34:27Z Yijing Wang wangyijing@huawei.com 2014-05-30T03:01:03Z urn:sha1:c893d133eaccdda2516a3e71cd05a7dac2e14b00 pci_bus_add_device() always returns 0, so there's no point in returning anything at all. Make it a void function and remove the tests of the return value from the callers. [bhelgaas: changelog, remove unused "err" from i82875p_setup_overfl_dev()] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>