<feed xmlns='http://www.w3.org/2005/Atom'>
<title>kernel/include/linux/mmc, branch linux-6.9.y</title>
<subtitle>Hosts the 0x221E linux distro kernel.</subtitle>
<id>https://universe.0xinfinity.dev/distro/kernel/atom?h=linux-6.9.y</id>
<link rel='self' href='https://universe.0xinfinity.dev/distro/kernel/atom?h=linux-6.9.y'/>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/'/>
<updated>2024-06-16T11:51:00Z</updated>
<entry>
<title>mmc: core: Add mmc_gpiod_set_cd_config() function</title>
<updated>2024-06-16T11:51:00Z</updated>
<author>
<name>Hans de Goede</name>
<email>hdegoede@redhat.com</email>
</author>
<published>2024-04-10T19:16:34Z</published>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/commit/?id=984969e0150c93bd2794e8b2d11410ea14da70e8'/>
<id>urn:sha1:984969e0150c93bd2794e8b2d11410ea14da70e8</id>
<content type='text'>
commit 63a7cd660246aa36af263b85c33ecc6601bf04be upstream.

Some mmc host drivers may need to fixup a card-detection GPIO's config
to e.g. enable the GPIO controllers builtin pull-up resistor on devices
where the firmware description of the GPIO is broken (e.g. GpioInt with
PullNone instead of PullUp in ACPI DSDT).

Since this is the exception rather then the rule adding a config
parameter to mmc_gpiod_request_cd() seems undesirable, so instead
add a new mmc_gpiod_set_cd_config() function. This is simply a wrapper
to call gpiod_set_config() on the card-detect GPIO acquired through
mmc_gpiod_request_cd().

Reviewed-by: Andy Shevchenko &lt;andy@kernel.org&gt;
Signed-off-by: Hans de Goede &lt;hdegoede@redhat.com&gt;
Acked-by: Adrian Hunter &lt;adrian.hunter@intel.com&gt;
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240410191639.526324-2-hdegoede@redhat.com
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>mmc: core: Use a struct device* as in-param to mmc_of_parse_clk_phase()</title>
<updated>2024-03-05T11:57:45Z</updated>
<author>
<name>Yang Xiwen</name>
<email>forbidden405@outlook.com</email>
</author>
<published>2024-02-29T01:36:19Z</published>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/commit/?id=88803989ff6d73155969df94cc84f1ecd28c4d9c'/>
<id>urn:sha1:88803989ff6d73155969df94cc84f1ecd28c4d9c</id>
<content type='text'>
Parsing dt usually happens very early, sometimes even before the struct
mmc_host has been allocated (e.g. dw_mci_probe() and dw_mci_parse_dt() in
dw_mmc.c). Looking at the source of mmc_of_parse_clk_phase(), it's actually
not needed to have an initialized mmc_host, let's therefore pass a struct
device* to it instead.

Also update the only current user, sdhci-of-aspeed.

Reviewed-by: Paul Menzel &lt;pmenzel@molgen.mpg.de&gt;
Acked-by: Andrew Jeffery &lt;andrew@codeconstruct.com.au&gt;
Signed-off-by: Yang Xiwen &lt;forbidden405@outlook.com&gt;
Link: https://lore.kernel.org/r/20240229-b4-mmc-hi3798mv200-v7-1-10c03f316285@outlook.com
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>mmc: core: Add wp_grp_size sysfs node</title>
<updated>2024-01-02T16:54:05Z</updated>
<author>
<name>Lin Gui</name>
<email>lin.gui@mediatek.com</email>
</author>
<published>2023-12-18T23:05:32Z</published>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/commit/?id=e4df56ad0bf3506c5189abb9be83f3bea05a4c4f'/>
<id>urn:sha1:e4df56ad0bf3506c5189abb9be83f3bea05a4c4f</id>
<content type='text'>
The eMMC card can be set into write-protected mode to prevent data from
being accidentally modified or deleted. Wp_grp_size (Write Protect Group
Size) refers to an attribute of the eMMC card, used to manage write
protection and is the CSD register [36:32] of the eMMC device. Wp_grp_size
(Write Protect Group Size) indicates how many eMMC blocks are contained in
each write protection group on the eMMC card.

To allow userspace easy access of the CSD register bits, let's add sysfs
node "wp_grp_size".

Signed-off-by: Lin Gui &lt;lin.gui@mediatek.com&gt;
Signed-off-by: Bo Ye &lt;bo.ye@mediatek.com&gt;
Reviewed-by: AngeloGioacchino Del Regno &lt;angelogioacchino.delregno@collabora.com&gt;
Link: https://lore.kernel.org/r/20231218230532.82427-1-bo.ye@mediatek.com
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>mmc: core: Remove packed command leftovers</title>
<updated>2023-12-07T13:08:44Z</updated>
<author>
<name>Avri Altman</name>
<email>avri.altman@wdc.com</email>
</author>
<published>2023-10-30T06:22:26Z</published>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/commit/?id=37c8ceb6d92c955f5dd8223c3f6c90b277322210'/>
<id>urn:sha1:37c8ceb6d92c955f5dd8223c3f6c90b277322210</id>
<content type='text'>
Packed commands support was removed long time ago, but some bits got
left behind. Remove them.

Signed-off-by: Avri Altman &lt;avri.altman@wdc.com&gt;
Link: https://lore.kernel.org/r/20231030062226.1895692-1-avri.altman@wdc.com
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A</title>
<updated>2023-11-03T11:01:32Z</updated>
<author>
<name>Bean Huo</name>
<email>beanhuo@micron.com</email>
</author>
<published>2023-10-30T22:48:09Z</published>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/commit/?id=ed9009ad300c0f15a3ecfe9613547b1962bde02c'/>
<id>urn:sha1:ed9009ad300c0f15a3ecfe9613547b1962bde02c</id>
<content type='text'>
Micron MTFC4GACAJCN eMMC supports cache but requires that flush cache
operation be allowed only after a write has occurred. Otherwise, the
cache flush command or subsequent commands will time out.

Signed-off-by: Bean Huo &lt;beanhuo@micron.com&gt;
Signed-off-by: Rafael Beims &lt;rafael.beims@toradex.com&gt;
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231030224809.59245-1-beanhuo@iokpp.de
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>mmc: core: Allow dynamical updates of the number of requests for hsq</title>
<updated>2023-09-27T10:13:18Z</updated>
<author>
<name>Wenchao Chen</name>
<email>wenchao.chen@unisoc.com</email>
</author>
<published>2023-09-19T07:47:06Z</published>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/commit/?id=2e2b547950bc09e75afe912f9683be39c2195d9d'/>
<id>urn:sha1:2e2b547950bc09e75afe912f9683be39c2195d9d</id>
<content type='text'>
To allow dynamical updates of the current number of used in-flight
requests, let's move away from using a hard-coded value to a use a
corresponding variable in the struct mmc_host.

This can be valuable when optimizing for certain I/O request sequences, as
shown by subsequent changes.

Signed-off-by: Wenchao Chen &lt;wenchao.chen@unisoc.com&gt;
Link: https://lore.kernel.org/r/20230919074707.25517-2-wenchao.chen@unisoc.com
[Ulf: Re-wrote the commitmsg to clarify the change]
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>mmc: core: Add host specific tuning support for SD HS mode</title>
<updated>2023-08-25T09:45:51Z</updated>
<author>
<name>Wenchao Chen</name>
<email>wenchao.chen@unisoc.com</email>
</author>
<published>2023-08-25T09:17:42Z</published>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/commit/?id=bac806830fde94ccf41482535fc442c02656febc'/>
<id>urn:sha1:bac806830fde94ccf41482535fc442c02656febc</id>
<content type='text'>
To support the need for host specific tuning for SD high-speed mode, let's
add two new optional callbacks, -&gt;prepare|execute_sd_hs_tuning() and let's
call them when switching into the SD high-speed mode.

Note that, during the tuning process it's also needed for host drivers to
send commands to the SD card to verify that the tuning process succeeds.
Therefore, let's also share the corresponding functions from the core to
allow this.

Signed-off-by: Wenchao Chen &lt;wenchao.chen@unisoc.com&gt;
Link: https://lore.kernel.org/r/20230825091743.15613-2-wenchao.chen@unisoc.com
[Ulf: Dropped unnecessary function declarations and updated the commit msg]
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next</title>
<updated>2023-06-28T23:43:10Z</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2023-06-28T23:43:10Z</published>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/commit/?id=3a8a670eeeaa40d87bd38a587438952741980c18'/>
<id>urn:sha1:3a8a670eeeaa40d87bd38a587438952741980c18</id>
<content type='text'>
Pull networking changes from Jakub Kicinski:
 "WiFi 7 and sendpage changes are the biggest pieces of work for this
  release. The latter will definitely require fixes but I think that we
  got it to a reasonable point.

  Core:

   - Rework the sendpage &amp; splice implementations

     Instead of feeding data into sockets page by page extend sendmsg
     handlers to support taking a reference on the data, controlled by a
     new flag called MSG_SPLICE_PAGES

     Rework the handling of unexpected-end-of-file to invoke an
     additional callback instead of trying to predict what the right
     combination of MORE/NOTLAST flags is

     Remove the MSG_SENDPAGE_NOTLAST flag completely

   - Implement SCM_PIDFD, a new type of CMSG type analogous to
     SCM_CREDENTIALS, but it contains pidfd instead of plain pid

   - Enable socket busy polling with CONFIG_RT

   - Improve reliability and efficiency of reporting for ref_tracker

   - Auto-generate a user space C library for various Netlink families

  Protocols:

   - Allow TCP to shrink the advertised window when necessary, prevent
     sk_rcvbuf auto-tuning from growing the window all the way up to
     tcp_rmem[2]

   - Use per-VMA locking for "page-flipping" TCP receive zerocopy

   - Prepare TCP for device-to-device data transfers, by making sure
     that payloads are always attached to skbs as page frags

   - Make the backoff time for the first N TCP SYN retransmissions
     linear. Exponential backoff is unnecessarily conservative

   - Create a new MPTCP getsockopt to retrieve all info
     (MPTCP_FULL_INFO)

   - Avoid waking up applications using TLS sockets until we have a full
     record

   - Allow using kernel memory for protocol ioctl callbacks, paving the
     way to issuing ioctls over io_uring

   - Add nolocalbypass option to VxLAN, forcing packets to be fully
     encapsulated even if they are destined for a local IP address

   - Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
     in-kernel ECMP implementation (e.g. Open vSwitch) select the same
     link for all packets. Support L4 symmetric hashing in Open vSwitch

   - PPPoE: make number of hash bits configurable

   - Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
     (ipconfig)

   - Add layer 2 miss indication and filtering, allowing higher layers
     (e.g. ACL filters) to make forwarding decisions based on whether
     packet matched forwarding state in lower devices (bridge)

   - Support matching on Connectivity Fault Management (CFM) packets

   - Hide the "link becomes ready" IPv6 messages by demoting their
     printk level to debug

   - HSR: don't enable promiscuous mode if device offloads the proto

   - Support active scanning in IEEE 802.15.4

   - Continue work on Multi-Link Operation for WiFi 7

  BPF:

   - Add precision propagation for subprogs and callbacks. This allows
     maintaining verification efficiency when subprograms are used, or
     in fact passing the verifier at all for complex programs,
     especially those using open-coded iterators

   - Improve BPF's {g,s}setsockopt() length handling. Previously BPF
     assumed the length is always equal to the amount of written data.
     But some protos allow passing a NULL buffer to discover what the
     output buffer *should* be, without writing anything

   - Accept dynptr memory as memory arguments passed to helpers

   - Add routing table ID to bpf_fib_lookup BPF helper

   - Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands

   - Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
     maps as read-only)

   - Show target_{obj,btf}_id in tracing link fdinfo

   - Addition of several new kfuncs (most of the names are
     self-explanatory):
      - Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
        bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
        and bpf_dynptr_clone().
      - bpf_task_under_cgroup()
      - bpf_sock_destroy() - force closing sockets
      - bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs

  Netfilter:

   - Relax set/map validation checks in nf_tables. Allow checking
     presence of an entry in a map without using the value

   - Increase ip_vs_conn_tab_bits range for 64BIT builds

   - Allow updating size of a set

   - Improve NAT tuple selection when connection is closing

  Driver API:

   - Integrate netdev with LED subsystem, to allow configuring HW
     "offloaded" blinking of LEDs based on link state and activity
     (i.e. packets coming in and out)

   - Support configuring rate selection pins of SFP modules

   - Factor Clause 73 auto-negotiation code out of the drivers, provide
     common helper routines

   - Add more fool-proof helpers for managing lifetime of MDIO devices
     associated with the PCS layer

   - Allow drivers to report advanced statistics related to Time Aware
     scheduler offload (taprio)

   - Allow opting out of VF statistics in link dump, to allow more VFs
     to fit into the message

   - Split devlink instance and devlink port operations

  New hardware / drivers:

   - Ethernet:
      - Synopsys EMAC4 IP support (stmmac)
      - Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
      - Marvell 88E6250 7 port switches
      - Microchip LAN8650/1 Rev.B0 PHYs
      - MediaTek MT7981/MT7988 built-in 1GE PHY driver

   - WiFi:
      - Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
      - Realtek RTL8723DS (SDIO variant)
      - Realtek RTL8851BE

   - CAN:
      - Fintek F81604

  Drivers:

   - Ethernet NICs:
      - Intel (100G, ice):
         - support dynamic interrupt allocation
         - use meta data match instead of VF MAC addr on slow-path
      - nVidia/Mellanox:
         - extend link aggregation to handle 4, rather than just 2 ports
         - spawn sub-functions without any features by default
      - OcteonTX2:
         - support HTB (Tx scheduling/QoS) offload
         - make RSS hash generation configurable
         - support selecting Rx queue using TC filters
      - Wangxun (ngbe/txgbe):
         - add basic Tx/Rx packet offloads
         - add phylink support (SFP/PCS control)
      - Freescale/NXP (enetc):
         - report TAPRIO packet statistics
      - Solarflare/AMD:
         - support matching on IP ToS and UDP source port of outer
           header
         - VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
         - add devlink dev info support for EF10

   - Virtual NICs:
      - Microsoft vNIC:
         - size the Rx indirection table based on requested
           configuration
         - support VLAN tagging
      - Amazon vNIC:
         - try to reuse Rx buffers if not fully consumed, useful for ARM
           servers running with 16kB pages
      - Google vNIC:
         - support TCP segmentation of &gt;64kB frames

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - enable USXGMII (88E6191X)
      - Microchip:
         - lan966x: add support for Egress Stage 0 ACL engine
         - lan966x: support mapping packet priority to internal switch
           priority (based on PCP or DSCP)

   - Ethernet PHYs:
      - Broadcom PHYs:
         - support for Wake-on-LAN for BCM54210E/B50212E
         - report LPI counter
      - Microsemi PHYs: support RGMII delay configuration (VSC85xx)
      - Micrel PHYs: receive timestamp in the frame (LAN8841)
      - Realtek PHYs: support optional external PHY clock
      - Altera TSE PCS: merge the driver into Lynx PCS which it is a
        variant of

   - CAN: Kvaser PCIEcan:
      - support packet timestamping

   - WiFi:
      - Intel (iwlwifi):
         - major update for new firmware and Multi-Link Operation (MLO)
         - configuration rework to drop test devices and split the
           different families
         - support for segmented PNVM images and power tables
         - new vendor entries for PPAG (platform antenna gain) feature
      - Qualcomm 802.11ax (ath11k):
         - Multiple Basic Service Set Identifier (MBSSID) and Enhanced
           MBSSID Advertisement (EMA) support in AP mode
         - support factory test mode
      - RealTek (rtw89):
         - add RSSI based antenna diversity
         - support U-NII-4 channels on 5 GHz band
      - RealTek (rtl8xxxu):
         - AP mode support for 8188f
         - support USB RX aggregation for the newer chips"

* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
  net: scm: introduce and use scm_recv_unix helper
  af_unix: Skip SCM_PIDFD if scm-&gt;pid is NULL.
  net: lan743x: Simplify comparison
  netlink: Add __sock_i_ino() for __netlink_diag_dump().
  net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
  Revert "af_unix: Call scm_recv() only after scm_set_cred()."
  phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
  libceph: Partially revert changes to support MSG_SPLICE_PAGES
  net: phy: mscc: fix packet loss due to RGMII delays
  net: mana: use vmalloc_array and vcalloc
  net: enetc: use vmalloc_array and vcalloc
  ionic: use vmalloc_array and vcalloc
  pds_core: use vmalloc_array and vcalloc
  gve: use vmalloc_array and vcalloc
  octeon_ep: use vmalloc_array and vcalloc
  net: usb: qmi_wwan: add u-blox 0x1312 composition
  perf trace: fix MSG_SPLICE_PAGES build error
  ipvlan: Fix return value of ipvlan_queue_xmit()
  netfilter: nf_tables: fix underflow in chain reference counter
  netfilter: nf_tables: unbind non-anonymous set if rule construction fails
  ...
</content>
</entry>
<entry>
<title>mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston Canvas Go Plus from 11/2019</title>
<updated>2023-06-20T11:19:34Z</updated>
<author>
<name>Marek Vasut</name>
<email>marex@denx.de</email>
</author>
<published>2023-06-20T10:27:13Z</published>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/commit/?id=c467c8f081859d4f4ca4eee4fba54bb5d85d6c97'/>
<id>urn:sha1:c467c8f081859d4f4ca4eee4fba54bb5d85d6c97</id>
<content type='text'>
This microSD card never clears Flush Cache bit after cache flush has
been started in sd_flush_cache(). This leads e.g. to failure to mount
file system. Add a quirk which disables the SD cache for this specific
card from specific manufacturing date of 11/2019, since on newer dated
cards from 05/2023 the cache flush works correctly.

Fixes: 08ebf903af57 ("mmc: core: Fixup support for writeback-cache for eMMC and SD")
Signed-off-by: Marek Vasut &lt;marex@denx.de&gt;
Link: https://lore.kernel.org/r/20230620102713.7701-1-marex@denx.de
Signed-off-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
</content>
</entry>
<entry>
<title>mmc: sdio: Add/rename SDIO ID of the RTL8723DS SDIO wifi cards</title>
<updated>2023-05-25T16:09:39Z</updated>
<author>
<name>Martin Blumenstingl</name>
<email>martin.blumenstingl@googlemail.com</email>
</author>
<published>2023-05-22T20:24:24Z</published>
<link rel='alternate' type='text/html' href='https://universe.0xinfinity.dev/distro/kernel/commit/?id=09fcdbd28404b7e02cc9fc4862ae5b43b76867c0'/>
<id>urn:sha1:09fcdbd28404b7e02cc9fc4862ae5b43b76867c0</id>
<content type='text'>
RTL8723DS comes in two variant and each of them has their own SDIO ID:
- 0xd723 can connect two antennas. The WiFi part is still 1x1 so the
  second antenna can be dedicated to Bluetooth
- 0xd724 can only connect one antenna so it's shared between WiFi and
  Bluetooth

Add a new entry for the single antenna RTL8723DS (0xd724) which can be
found on the MangoPi MQ-Quad. Also rename the existing RTL8723DS entry
(0xd723) so it's name reflects that it's the variant with support for
two antennas.

Reviewed-by: Ping-Ke Shih &lt;pkshih@realtek.com&gt;
Signed-off-by: Martin Blumenstingl &lt;martin.blumenstingl@googlemail.com&gt;
Signed-off-by: Kalle Valo &lt;kvalo@kernel.org&gt;
Link: https://lore.kernel.org/r/20230522202425.1827005-4-martin.blumenstingl@googlemail.com
</content>
</entry>
</feed>
