kernel/include/linux/mlx5, branch linux-5.7.y

net/mlx5e: Modify uplink state on interface up/down

2020-08-05T07:58:43Z

[ Upstream commit 7d0314b11cdd92bca8b89684c06953bf114605fc ] When setting the PF interface up/down, notify the firmware to update uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled. This behavior will prevent sending traffic out on uplink port when PF is down, such as sending traffic from a VF interface which is still up. Currently when calling mlx5e_open/close(), the driver only sends PAOS command to notify the firmware to set the physical port state to up/down, however, it is not sufficient. When VF is in "auto" state, it follows the uplink state, which was not updated on mlx5e_open/close() before this patch. When switchdev mode is enabled and uplink representor is first enabled, set the uplink port state value back to its FW default "AUTO". Fixes: 63bfd399de55 ("net/mlx5e: Send PAOS command on interface up/down") Signed-off-by: Ron Diskin Reviewed-by: Roi Dayan Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

net/mlx5: Avoid processing commands before cmdif is ready

2020-05-23T00:28:38Z

When driver is reloading during recovery flow, it can't get new commands till command interface is up again. Otherwise we may get to null pointer trying to access non initialized command structures. Add cmdif state to avoid processing commands while cmdif is not ready. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha Signed-off-by: Moshe Shemesh Signed-off-by: Saeed Mahameed

net/mlx5: Fix a race when moving command interface to events mode

2020-05-23T00:28:36Z

After driver creates (via FW command) an EQ for commands, the driver will be informed on new commands completion by EQE. However, due to a race in driver's internal command mode metadata update, some new commands will still be miss-handled by driver as if we are in polling mode. Such commands can get two non forced completion, leading to already freed command entry access. CREATE_EQ command, that maps EQ to the command queue must be posted to the command queue while it is empty and no other command should be posted. Add SW mechanism that once the CREATE_EQ command is about to be executed, all other commands will return error without being sent to the FW. Allow sending other commands only after successfully changing the driver's internal command mode metadata. We can safely return error to all other commands while creating the command EQ, as all other commands might be sent from the user/application during driver load. Application can rerun them later after driver's load was finished. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha Signed-off-by: Moshe Shemesh Signed-off-by: Saeed Mahameed

net/mlx5: Add command entry handling completion

2020-05-23T00:28:34Z

When FW response to commands is very slow and all command entries in use are waiting for completion we can have a race where commands can get timeout before they get out of the queue and handled. Timeout completion on uninitialized command will cause releasing command's buffers before accessing it for initialization and then we will get NULL pointer exception while trying access it. It may also cause releasing buffers of another command since we may have timeout completion before even allocating entry index for this command. Add entry handling completion to avoid this race. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh Signed-off-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2020-04-02T01:18:18Z

Pull rdma updates from Jason Gunthorpe: "The majority of the patches are cleanups, refactorings and clarity improvements. This cycle saw some more activity from Syzkaller, I think we are now clean on all but one of those bugs, including the long standing and obnoxious rdma_cm locking design defect. Continue to see many drivers getting cleanups, with a few new user visible features. Summary: - Various driver updates for siw, bnxt_re, rxe, efa, mlx5, hfi1 - Lots of cleanup patches for hns - Convert more places to use refcount - Aggressively lock the RDMA CM code that syzkaller says isn't working - Work to clarify ib_cm - Use the new ib_device lifecycle model in bnxt_re - Fix mlx5's MR cache which seems to be failing more often with the new ODP code - mlx5 'dynamic uar' and 'tx steering' user interfaces" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (144 commits) RDMA/bnxt_re: make bnxt_re_ib_init static IB/qib: Delete struct qib_ivdev.qp_rnd RDMA/hns: Fix uninitialized variable bug RDMA/hns: Modify the mask of QP number for CQE of hip08 RDMA/hns: Reduce the maximum number of extend SGE per WQE RDMA/hns: Reduce PFC frames in congestion scenarios RDMA/mlx5: Add support for RDMA TX flow table net/mlx5: Add support for RDMA TX steering IB/hfi1: Call kobject_put() when kobject_init_and_add() fails IB/hfi1: Fix memory leaks in sysfs registration and unregistration IB/mlx5: Move to fully dynamic UAR mode once user space supports it IB/mlx5: Limit the scope of struct mlx5_bfreg_info to mlx5_ib IB/mlx5: Extend QP creation to get uar page index from user space IB/mlx5: Extend CQ creation to get uar page index from user space IB/mlx5: Expose UAR object and its alloc/destroy commands IB/hfi1: Get rid of a warning RDMA/hns: Remove redundant judgment of qp_type RDMA/hns: Remove redundant assignment of wc->smac when polling cq RDMA/hns: Remove redundant qpc setup operations RDMA/hns: Remove meaningless prints ...

Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

2020-03-30T06:42:11Z

* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: mlx5: Remove uninitialized use of key in mlx5_core_create_mkey {IB,net}/mlx5: Move asynchronous mkey creation to mlx5_ib {IB,net}/mlx5: Assign mkey variant in mlx5_ib only {IB,net}/mlx5: Setup mkey variant before mr create command invocation Signed-off-by: Saeed Mahameed

Merge branch 'mlx5_tx_steering' into rdma.git for-next

2020-03-27T16:26:59Z

Leon Romanovsky says: ==================== Those two patches from Michael extends mlx5_core and mlx5_ib flow steering to support RDMA TX in similar way to already supported RDMA RX. ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Due to dependencies * branch 'mlx5_tx_steering': RDMA/mlx5: Add support for RDMA TX flow table net/mlx5: Add support for RDMA TX steering

net/mlx5: Add support for RDMA TX steering

2020-03-27T16:24:48Z

Add new RDMA TX flow steering namespace. Flow steering rules in this namespace are used to filter transmitted RDMA traffic. Link: https://lore.kernel.org/r/20200324061425.1570190-2-leon@kernel.org Signed-off-by: Michael Guralnik Reviewed-by: Maor Gottlieb Reviewed-by: Mark Bloch Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

IB/mlx5: Limit the scope of struct mlx5_bfreg_info to mlx5_ib

2020-03-27T15:59:04Z

struct mlx5_bfreg_info is used by mlx5_ib only but is exposed to both RDMA and netdev parts of mlx5 driver. Move that struct to mlx5_ib namespace, clean vertical space alignment and convert lib_uar_4k from bool to bitfield. Link: https://lore.kernel.org/r/20200324060143.1569116-5-leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

net/mlx5: Eswitch, enable forwarding back to uplink port

2020-03-18T02:41:39Z

Add dependencny on cap termination_table_raw_traffic to allow non encapsulated packets received from uplink to be forwarded back to the received uplink port. Refactor the conditions into a separate function. Signed-off-by: Eli Cohen Reviewed-by: Oz Shlomo Signed-off-by: Saeed Mahameed