kernel/include/linux/mfd/rtsx_pci.h, branch linux-4.15.y

mfd: Fix RTS5227 (and others) powermanagement

2017-12-07T10:40:57Z

Commit 8275b77a1513 ("mfd: rts5249: Add support for RTS5250S power saving") adds powersaving support for device-ids 5249 524a and 525a. But as a side effect it breaks ASPM support for all the other device-ids, causing e.g. the Haswell CPU on a Lenovo T440s to not go into a higher c-state then PC3, while previously it would go to PC7, causing the machine to idle at 7.4W instead of 6.6W! The problem here is the new option.dev_aspm_mode field, which only gets explicitly initialized in the new code for the device-ids 5249 524a and 525a. Leaving the dev_aspm_mode 0 for the other device-ids. The default dev_aspm_mode 0 is mapped to DEV_ASPM_DISABLE, but the old behavior of calling rtsx_pci_enable_aspm() when idle and rtsx_pci_disable_aspm() when busy happens when dev_aspm_mode == DEV_ASPM_DYNAMIC. This commit changes the enum so that 0 = DEV_ASPM_DYNAMIC matching the old default behavior, fixing the pm regression with the other device-ids. Fixes: 8275b77a1513 ("mfd: rts5249: Add support for RTS5250S power saving") Signed-off-by: Hans de Goede Acked-by: Rui Feng Signed-off-by: Lee Jones

Merge tag 'mfd-next-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2017-11-16T17:15:57Z

Pull MFD updates from Lee Jones: "New drivers: - Add support for Cherry Trail Dollar Cove TI PMIC - Add support for Add Spreadtrum SC27xx series PMICs New device support: - Add support Regulator to axp20x New functionality: - Add DT support; aspeed-scu sc27xx-pmic - Add power saving support; rts5249 Fix-ups: - DT clean-up/rework; tps65217, max77693, iproc-cdru, iproc-mhb, tps65218 - Staticise/constify; stw481x - Use new succinct IRQ API; fsl-imx25-tsadc - Kconfig fix-ups; MFD_TPS65218 - Identify SPI method; lpc_ich - Use managed resources (devm_*) calls; ssbi - Remove unused/obsolete code/documentation; mc13xxx Bug fixes: - Fix typo in MAINTAINERS - Fix error handling; mxs-lradc - Clean-up IRQs on .remove; fsl-imx25-tsadc" * tag 'mfd-next-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (21 commits) dt-bindings: mfd: mc13xxx: Remove obsolete property mfd: axp20x: Add axp20x-regulator cell for AXP813 mfd: Add Spreadtrum SC27xx series PMICs driver dt-bindings: mfd: Add Spreadtrum SC27xx PMIC documentation mfd: ssbi: Use devm_of_platform_populate() mfd: fsl-imx25: Clean up irq settings during removal mfd: mxs-lradc: Fix error handling in mxs_lradc_probe() mfd: lpc_ich: Avoton/Rangeley uses SPI_BYT method mfd: tps65218: Introduce dependency on CONFIG_OF mfd: tps65218: Correct the config description MAINTAINERS: Fix Dialog search term for watchdog binding file mfd: fsl-imx25: Set irq handler and data in one go mfd: rts5249: Add support for RTS5250S power saving ACPI / PMIC: Add opregion driver for Intel Dollar Cove TI PMIC mfd: Add support for Cherry Trail Dollar Cove TI PMIC syscon: dt-bindings: Add binding document for iProc MHB block syscon: dt-bindings: Add binding doc for Broadcom iProc CDRU mfd: max77693: Add muic of_compatible in mfd_cell mfd: stw481x: Make three arrays static const, reduces object code size mfd: tps65217: Introduce dependency on CONFIG_OF ...

mmc: rtsx: fix tuning fail on gen3 PCI-Express

2017-10-30T10:45:53Z

On gen3 PCI-Express we should send command one by one. If sending many commands in one packet will lead to a failure. Signed-off-by: rui_feng Signed-off-by: Ulf Hansson

mfd: rts5249: Add support for RTS5250S power saving

2017-10-13T09:42:59Z

Enable power saving for RTS5250S as following steps: 1.Set 0xFE58 to enable clock power management. 2.Check cfg space whether support L1SS or not. 3.If support L1SS, set 0xFF03 to free clkreq. 4.When entering idle status, enable aspm and set parameters for L1SS and LTR. 5.Wnen entering run status, disable aspm and set parameters for L1SS and LTR. If entering L1SS mode successfully, electric current will be below 2mA. Signed-off-by: Rui Feng Signed-off-by: Lee Jones

mfd: rtsx: Do retry when DMA transfer error

2017-07-06T07:29:11Z

The request should be resent when DMA transfer error occurred. For rts5227, the clock rate needs to be reduced when error occurred. Signed-off-by: Steven Feng Signed-off-by: Lee Jones

mfd: rtsx: Add support for rts522A

2015-10-30T17:19:51Z

rts522a(rts5227s) is derived from rts5227, and mainly same with rts5227. Add it to file mfd/rts5227.c to support this chip. Signed-off-by: Micky Ching Signed-off-by: Lee Jones

mfd: rtsx: Add support for rts525A

2015-03-03T16:41:21Z

Add support for new chip rts525A. Signed-off-by: Micky Ching Signed-off-by: Lee Jones

mfd: rtsx: Add support for rts524A

2015-03-03T16:41:20Z

add support for new chip rts524A. Signed-off-by: Micky Ching Signed-off-by: Lee Jones

mfd: rtsx: Remove LCTLR defination

2015-03-03T16:41:19Z

To enable/disable ASPM we should find LINK CONTROL register in PCI config space. All old chip use 0x80 address, but new chip may use another address, so we using pci_find_capability() to get LINK CONTROL address. rtsx_gops.c was removed, we consider to put some common operations to this file, but the actual thing is, only a group of chips are in common ops1, and another group of chips in common ops2, it is hard to decide put which ops into generic ops file. Signed-off-by: Micky Ching Signed-off-by: Lee Jones

mfd: rtsx: Update phy register

2015-03-03T16:41:19Z

Update some phy register name and value for rts5249, the updated value makes chip more stable on some platform. Signed-off-by: Micky Ching Signed-off-by: Lee Jones