kernel/include/linux/mfd/dbx500-prcmu.h, branch linux-rolling-stable

arm: Handle KCOV __init vs inline mismatches

2025-07-22T04:43:39Z

When KCOV is enabled all functions get instrumented, unless the __no_sanitize_coverage attribute is used. To prepare for __no_sanitize_coverage being applied to __init functions, we have to handle differences in how GCC's inline optimizations get resolved. For arm this exposed several places where __init annotations were missing but ended up being "accidentally correct". Fix these cases and force several functions to be inline with __always_inline. Acked-by: Nishanth Menon Acked-by: Lee Jones Reviewed-by: Nishanth Menon Link: https://lore.kernel.org/r/20250717232519.2984886-5-kees@kernel.org Signed-off-by: Kees Cook

mfd: db8500-prcmu: Remove needless return in three void APIs

2025-03-14T08:59:07Z

Remove needless 'return' in the following void APIs: prcmu_early_init() prcmu_system_reset() prcmu_modem_reset() Since both the API and callee involved are void functions. Signed-off-by: Zijun Hu Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20250221-rmv_return-v1-15-cc8dff275827@quicinc.com Signed-off-by: Lee Jones

mfd: db8500-prcmu: Remove unused inline functions

2023-08-18T20:48:03Z

Since commit b0e846248de5 ("mfd: db8500-prcmu: Remove dead code for a non-existing config") these inline helpers also no need any more. Signed-off-by: YueHaibing Link: https://lore.kernel.org/r/20230720143738.13996-1-yuehaibing@huawei.com Signed-off-by: Lee Jones

mfd: db8500-prcmu: Remove unused inline function

2022-03-23T14:51:51Z

commit b0e846248de5 ("mfd: db8500-prcmu: Remove dead code for a non-existing config") left behind this, remove it. Signed-off-by: YueHaibing Reviewed-by: Linus Walleij Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20220311125518.31064-1-yuehaibing@huawei.com

mfd: db8500-prcmu: Remove dead code for a non-existing config

2022-03-08T09:44:05Z

The config DBX500_PRCMU_QOS_POWER was never introduced in the kernel repository. So, the ifdef in ./include/linux/mfd/dbx500-prcmu.h was never effective. Remove these dead function prototypes. Signed-off-by: Lukas Bulwahn Reviewed-by: Linus Walleij Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20211227064839.21405-1-lukas.bulwahn@gmail.com

mfd: db8500-prcmu: Handle missing FW variant

2021-08-09T08:33:29Z

There was an "unknown" firmware variant turning up in the wild causing problems in the clock driver. Add this missing variant and clarify that varian 11 and 15 are Samsung variants, as this is now very well known from released products. Signed-off-by: Linus Walleij Acked-by: Stephen Boyd Signed-off-by: Lee Jones

mfd: dbx500-prcmu: Drop DSI pll clock functions

2020-01-24T07:33:58Z

The DSI PLLs are handled by the generic clock framework since ages, this code is completely unused and misleading. Delete it. Cc: Stephan Gerhold Cc: Ulf Hansson Signed-off-by: Linus Walleij Signed-off-by: Lee Jones

mfd: dbx500-prcmu: Drop set_display_clocks()

2020-01-24T07:33:58Z

The display clocks are handled by the generic clock framework since ages, this code is completely unused and misleading. Delete it. Cc: Stephan Gerhold Cc: Ulf Hansson Signed-off-by: Linus Walleij Signed-off-by: Lee Jones

mfd: db8500-prcmu: Support U8420-sysclk firmware

2019-11-11T08:45:04Z

There is a distinct version of the Ux500 U8420 variant with "sysclk", as can be seen from the vendor code that didn't make it upstream, this firmware lacks the ULPPLL (ultra-low power phase locked loop) which in effect means that the timer clock is instead wired to the 32768 Hz always-on clock. This has some repercussions when enabling the timer clock as the code as it stands will disable the timer clock on these platforms (lacking the so-called "doze mode") and obtaining the wrong rate of the timer clock. The timer frequency is of course needed very early in the boot, and as a consequence, we need to shuffle around the early PRCMU init code: whereas in the past we did not need to look up the PRCMU firmware version in the early init, but now we need to know the version before the core system timers are registered so we restructure the platform callbacks to the PRCMU so as not to take any arguments and instead look up the resources it needs directly from the device tree when initializing. As we do not yet support any platforms using this firmware it is not a regression, but as PostmarketOS is starting to support products with this firmware we need to fix this up. The low rate of 32kHz also makes the MTU timer unsuitable as delay timer but this needs to be fixed in a separate patch. Signed-off-by: Linus Walleij Reviewed-by: Stephan Gerhold Acked-by: Olof Johansson Signed-off-by: Lee Jones

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 197

2019-05-30T18:29:22Z

Based on 1 normalized pattern(s): license terms gnu general public license v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 37 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Steve Winslow Reviewed-by: Alexios Zavras Reviewed-by: Richard Fontana Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170027.724130665@linutronix.de Signed-off-by: Greg Kroah-Hartman