kernel/include/linux/mfd/axp20x.h, branch linux-6.1.y

mfd/bus: sunxi-rsb: Make .remove() callback return void

2021-01-15T13:23:36Z

The driver core ignores the return value of struct device_driver::remove because there is only little that can be done. To simplify the quest to make this function return void, let struct sunxi_rsb_driver::remove return void, too. All users already unconditionally return 0, this commit makes this obvious and ensures future users don't behave differently. To simplify even further, make axp20x_device_remove() return void instead of returning 0 unconditionally, too. Signed-off-by: Uwe Kleine-König Reviewed-by: Chen-Yu Tsai Signed-off-by: Lee Jones

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2018-12-29T04:22:45Z

Pull power supply and reset updates from Sebastian Reichel: - New core support: - battery internal resistance - battery OCV capacity lookup table - support for custom sysfs attributes - Convert all drivers to use power-supply core support for custom sysfs attributes - bq24190-charger: bq24196 support - axp20x-charger: AXP813 support - sc27xx-battery: new fuel gauge driver - gpio-poweroff: support for specific active and inactive delays - Misc fixes * tag 'for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (53 commits) power: supply: bq25890: fix BAT_COMP field definition power: supply: gpio-charger: Do not use deprecated POWER_SUPPLY_TYPE_USB_* power: supply: ds2781: switch to devm_power_supply_register power: supply: ds2780: switch to devm_power_supply_register power: supply: ds2781: fix race-condition in bin attribute registration power: supply: ds2780: fix race-condition in bin attribute registration power: supply: pcf50633: fix race-condition in sysfs registration power: supply: charger-manager: fix race-condition in sysfs registration power: supply: charger-manager: simplify generation of sysfs attribute group name power: supply: bq24257: fix race-condition in sysfs registration power: supply: bq24190_charger: fix race-condition in sysfs registration power: supply: lp8788: fix race-condition in sysfs registration power: supply: ds2781: fix race-condition in sysfs registration power: supply: ds2780: fix race-condition in sysfs registration power: supply: bq2415x: fix race-condition in sysfs registration power: supply: core: add support for custom sysfs attributes power: supply: sc27xx: Save last battery capacity power: reset: at91-poweroff: move shdwc related data to one structure power: supply: sc27xx: Add suspend/resume interfaces power: supply: sc27xx: Add fuel gauge low voltage alarm ...

mfd: axp20x: name voltage ramping define properly

2018-12-13T16:39:46Z

The current axp20x names the ramping register 'scal' which probably means scaling. Since the register really has nothing to do with scaling, but really is the voltage ramp we rename it appropriately. Signed-off-by: Olliver Schinagl Signed-off-by: Priit Laes Acked-by: Lee Jones Signed-off-by: Mark Brown

power: supply: add AC power supply driver for AXP813

2018-12-05T17:49:32Z

AXP813 and AXP803 PMICs can control input current and minimum voltage. Both of these values are configurable. Signed-off-by: Oskari Lemmela Reviewed-by: Quentin Schulz Reviewed-by: Chen-Yu Tsai Acked-by: Lee Jones Signed-off-by: Sebastian Reichel

mfd: axp20x: Correct AXP806 POK interrupt prefix

2018-05-16T08:21:48Z

When AXP806 support was added, POK was incorrectly expanded to PWROK. However, the datasheet lists them as POK[LSNP], which is the same as on the AXP288. Furthermore, the registers associated with POK functions are the same as the PEK on the other AXP PMICs. This suggests that "POK" means "Power On Key", much like "PEK" means "Power Enable Key", instead of "Power OK". This patch changes the "PWROK" prefix to "POK" for these interrupts. Signed-off-by: Chen-Yu Tsai Signed-off-by: Lee Jones

mfd: axp20x: Constify struct mfd_cell and struct resource

2018-05-16T08:21:48Z

The axp20x driver has lots of mfd_cell and resource structs. These can all be const-ified. Signed-off-by: Chen-Yu Tsai Signed-off-by: Lee Jones

Merge tag 'iio-for-4.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2018-02-20T09:23:17Z

Jonathan writes: First round of new devices, features and cleanups for IIO in the 4.17 cycle. Outside of IIO * Strongly typed 64bit int_sqrt function needed by the mlx90632 New device support * adc081s - New driver supporting adc081s, adc101s and adc121s TI ADCs. * ad5272 - New driver supproting the ad5272 and ad5274 ADI digital potentiometers with DT bindings. * axp20x_adc - support the AXP813 ADC - includes rework patches to prepare for this. * mlx90632 - New driver with dt bindings for this IR temperature sensor. Features * axp20x_adc - Add DT bindings and probing. * dht11 - The sensor has a wider range than advertised in the datasheet - support it. * st_lsm6dsx - Add hardware timestamp su9pport. Cleanups * ABI docs - Update email contact for Matt Ranostay * SPDX changes - Matt Ranostay has moved his drivers over to SPDX. Currently we are making this an author choice in IIO. * ad7192 - Disable burnout current on misconfiguration. No actually effect as they simply won't work otherwise. * ad7476 - Drop a license definition that was replicating information in SPDX tag. * ade7758 - Expand buf_lock to cover both buffer and state protection allowing unintented uses of mlock in the core to be removed. * ade7759 - Align parameters to opening parenthesis. * at91_adc - Depend on sysfs instead of selecting it - for try wide consistency. * ccs811 - trivial naming type for a define. * ep93xx - Drop a redundant return as a result checking platform_get_resource. * hts221 - Regmap conversion which simplifies the driver somewhat. - Clean up some restricted endian cast warnings. - Drop a trailing whitespace from a comment - Drop an unnecessary get_unaligned by changing to the right 16bit data type. * ms5611 - Fix coding style in the probe function (whitespace) * st_accel - Use strlcpy instead of strncpy to avoid potentially truncating a string.

iio: adc: axp20x_adc: add support for AXP813 ADC

2018-01-30T18:33:25Z

The X-Powers AXP813 PMIC is really close to what is already done for AXP20X/AXP22X. There are two pairs of bits to set the rate (one for Voltage and Current measurements and one for TS/GPIO0 voltage measurements) instead of one. The register to set the ADC rates is different from the one for AXP20X/AXP22X. GPIO0 can be used as an ADC (measuring Volts) unlike for AXP22X. The scales to apply to the different inputs are unlike the ones from AXP20X and AXP22X. Signed-off-by: Quentin Schulz Acked-by: Jonathan Cameron Signed-off-by: Jonathan Cameron

extcon: axp288: Remove unused platform data

2018-01-03T01:11:02Z

This is not used / set anywhere in the tree. Signed-off-by: Hans de Goede Reviewed-by: Chanwoo Choi Acked-by: Lee Jones Signed-off-by: Chanwoo Choi