kernel/include/linux/mfd/arizona/pdata.h, branch linux-6.16.y

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

mfd: arizona: Update reset pin to use GPIOD

2018-05-16T08:21:48Z

Now GPIOD has support for both pdata systems and for non-standard DT bindings the Arizona reset GPIO can be converted to use it. Worth noting gpiod_set_raw_value_cansleep is used to match the behaviour of the old GPIOs. This is because the part is fairly widely used and it is unknown how many DTs are correctly setting active low through device tree, so to avoid breaking any existing users it is best to match the previous behaviour. Signed-off-by: Charles Keepax Reviewed-by: Linus Walleij Signed-off-by: Lee Jones

ASoC: arizona: Add support for setting the output volume limits

2017-09-20T16:34:35Z

The output volume limits allow signals to be limited to specific levels appropriate for the hardware attached. As this is a property of the hardware itself these will be configured through device tree. Signed-off-by: Charles Keepax Acked-by: Lee Jones Signed-off-by: Mark Brown

regulator: arizona-ldo1: Move pdata into a separate structure

2017-04-25T15:36:32Z

In preparation for sharing this driver with Madera, move the pdata for the LDO1 regulator out of struct arizona_pdata into a dedicated pdata struct for this driver. As a result the code in arizona_ldo1_of_get_pdata() can be made independent of struct arizona. This patch also updates the definition of struct arizona_pdata and the use of this pdata in mach-crag6410-module.c Signed-off-by: Richard Fitzgerald Acked-by: Krzysztof Kozlowski Acked-by: Lee Jones Signed-off-by: Mark Brown

regulator: arizona-micsupp: Move pdata into a separate structure

2017-04-25T15:36:20Z

In preparation for sharing this driver with Madera, move the pdata for the micsupp regulator out of struct arizona_pdata into a dedicated pdata struct for this driver. As a result the code in arizona_micsupp_of_get_pdata() can be made independent of struct arizona. This patch also updates the definition of struct arizona_pdata and the use of this pdata in mach-crag6410-module.c Signed-off-by: Richard Fitzgerald Acked-by: Lee Jones Signed-off-by: Mark Brown

mfd: arizona: Add device tree binding to specify mono outputs

2016-01-11T07:33:16Z

Add device tree bindings to support specifying outputs from the chip as mono outputs. Whilst we are doing it change the out_mono pdata from a bool to an int, because Sparse gets upset about using ARRAY_SIZE on bools. Signed-off-by: Charles Keepax Signed-off-by: Lee Jones

mfd: arizona: Add register bits for general purpose switch

2015-09-22T06:23:59Z

The switch is typically used in conjunction with the MICDET clamp in order to suppress pops and clicks associated with jack insertion. Signed-off-by: Charles Keepax Acked-by: Lee Jones Signed-off-by: Chanwoo Choi

mfd: arizona: Add registers for ADC microphone detection

2015-09-22T06:23:59Z

The newer devices support using a software comparison to determine whether a 3/4 pole jack is present. Add the registers necessary for this. Signed-off-by: Charles Keepax Acked-by: Lee Jones Signed-off-by: Chanwoo Choi

mfd: arizona: Add support for WM8998 and WM1814

2015-08-11T14:08:42Z

Signed-off-by: Richard Fitzgerald Signed-off-by: Lee Jones

mfd: arizona: Update several pdata members to unsigned

2015-08-11T14:08:40Z

Device tree and ACPI primarily deal with unsigned ints, many of the pdata members in the Arizona driver are signed ints but are only ever assigned positive values. Changing these pdata fields to unsigned ints avoids us having to choose between overly verbose code and Sparse warnings. Signed-off-by: Charles Keepax Signed-off-by: Lee Jones