kernel/include/linux/irqchip/arm-gic.h, branch linux-5.11.y

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-07-08T18:01:13Z

Pull irq updates from Thomas Gleixner: "The irq departement provides the usual mixed bag: Core: - Further improvements to the irq timings code which aims to predict the next interrupt for power state selection to achieve better latency/power balance - Add interrupt statistics to the core NMI handlers - The usual small fixes and cleanups Drivers: - Support for Renesas RZ/A1, Annapurna Labs FIC, Meson-G12A SoC and Amazon Gravition AMR/GIC interrupt controllers. - Rework of the Renesas INTC controller driver - ACPI support for Socionext SoCs - Enhancements to the CSKY interrupt controller - The usual small fixes and cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) irq/irqdomain: Fix comment typo genirq: Update irq stats from NMI handlers irqchip/gic-pm: Remove PM_CLK dependency irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FIC softirq: Use __this_cpu_write() in takeover_tasklets() irqchip/mbigen: Stop printing kernel addresses irqchip/gic: Add dependency for ARM_GIC_MAX_NR genirq/affinity: Remove unused argument from [__]irq_build_affinity_masks() genirq/timings: Add selftest for next event computation genirq/timings: Add selftest for irqs circular buffer genirq/timings: Add selftest for circular array genirq/timings: Encapsulate storing function genirq/timings: Encapsulate timings push genirq/timings: Optimize the period detection speed genirq/timings: Fix timings buffer inspection genirq/timings: Fix next event index function irqchip/qcom: Use struct_size() in devm_kzalloc() irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler dt-bindings: interrupt-controller: Update csky mpintc ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

irqchip/gic-v2m: Add support for Amazon Graviton variant of GICv3+GICv2m

2019-06-11T11:14:35Z

Add support for Amazon Graviton custom variant of GICv2m, where the message is encoded using the MSI message address, as opposed to standard GICv2m, where the SPI number is encoded in the MSI message data. In addition, the Graviton flavor of GICv2m is used along GICv3 (and not GICv2). Co-developed-by: Benjamin Herrenschmidt Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Zeev Zilberman Signed-off-by: Marc Zyngier

irqchip/gic: Drop support for secondary GIC in non-DT systems

2019-03-11T15:38:10Z

We do not have any in-tree platform with this pathological setup, and only a single system (Cavium's cns3xxx) isn't DT aware. Let's drop the secondary GIC support for now, until we remove the above horror altogether. Signed-off-by: Marc Zyngier

irqchip/gic: Unify GIC priority definitions

2018-10-03T10:30:14Z

LPIs use the same priority value as other GIC interrupts. Make the GIC default priority definition visible to ITS implementation and use this same definition for LPI priorities. Tested-by: Daniel Thompson Signed-off-by: Julien Thierry Cc: Thomas Gleixner Cc: Jason Cooper Cc: Marc Zyngier Signed-off-by: Marc Zyngier

KVM: arm/arm64: vgic: Signal IRQs using their configured group

2018-07-21T15:02:26Z

Now when we have a group configuration on the struct IRQ, use this state when populating the LR and signaling interrupts as either group 0 or group 1 to the VM. Depending on the model of the emulated GIC, and the guest's configuration of the VMCR, interrupts may be signaled as IRQs or FIQs to the VM. Reviewed-by: Andrew Jones Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier

KVM: arm/arm64: vgic: Define GICD_IIDR fields for GICv2 and GIv3

2018-07-21T15:02:19Z

Instead of hardcoding the shifts and masks in the GICD_IIDR register emulation, let's add the definition of these fields to the GIC header files and use them. This will make things more obvious when we're going to bump the revision in the IIDR when we'll make guest-visible changes to the implementation. Reviewed-by: Andrew Jones Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier

KVM: arm/arm64: vgic: Don't populate multiple LRs with the same vintid

2018-03-14T18:31:04Z

The vgic code is trying to be clever when injecting GICv2 SGIs, and will happily populate LRs with the same interrupt number if they come from multiple vcpus (after all, they are distinct interrupt sources). Unfortunately, this is against the letter of the architecture, and the GICv2 architecture spec says "Each valid interrupt stored in the List registers must have a unique VirtualID for that virtual CPU interface.". GICv3 has similar (although slightly ambiguous) restrictions. This results in guests locking up when using GICv2-on-GICv3, for example. The obvious fix is to stop trying so hard, and inject a single vcpu per SGI per guest entry. After all, pending SGIs with multiple source vcpus are pretty rare, and are mostly seen in scenario where the physical CPUs are severely overcomitted. But as we now only inject a single instance of a multi-source SGI per vcpu entry, we may delay those interrupts for longer than strictly necessary, and run the risk of injecting lower priority interrupts in the meantime. In order to address this, we adopt a three stage strategy: - If we encounter a multi-source SGI in the AP list while computing its depth, we force the list to be sorted - When populating the LRs, we prevent the injection of any interrupt of lower priority than that of the first multi-source SGI we've injected. - Finally, the injection of a multi-source SGI triggers the request of a maintenance interrupt when there will be no pending interrupt in the LRs (HCR_NPIE). At the point where the last pending interrupt in the LRs switches from Pending to Active, the maintenance interrupt will be delivered, allowing us to add the remaining SGIs using the same process. Cc: stable@vger.kernel.org Fixes: 0919e84c0fc1 ("KVM: arm/arm64: vgic-new: Add IRQ sync/flush framework") Acked-by: Christoffer Dall Signed-off-by: Marc Zyngier

KVM: arm/arm64: Fix isues with GICv2 on GICv3 migration

2017-05-24T07:44:07Z

We have been a little loose with our intermediate VMCR representation where we had a 'ctlr' field, but we failed to differentiate between the GICv2 GICC_CTLR and ICC_CTLR_EL1 layouts, and therefore ended up mapping the wrong bits into the individual fields of the ICH_VMCR_EL2 when emulating a GICv2 on a GICv3 system. Fix this by using explicit fields for the VMCR bits instead. Cc: Eric Auger Reported-by: wanghaibin Signed-off-by: Christoffer Dall Reviewed-by: Marc Zyngier Tested-by: Marc Zyngier

KVM: arm/arm64: vgic: Fix GICC_PMR uaccess on GICv3 and clarify ABI

2017-04-04T12:33:59Z

As an oversight, for GICv2, we accidentally export the GICC_PMR register in the format of the GICH_VMCR.VMPriMask field in the lower 5 bits of a word, meaning that userspace must always use the lower 5 bits to communicate with the KVM device and must shift the value left by 3 places to obtain the actual priority mask level. Since GICv3 supports the full 8 bits of priority masking in the ICH_VMCR, we have to fix the value we export when emulating a GICv2 on top of a hardware GICv3 and exporting the emulated GICv2 state to userspace. Take the chance to clarify this aspect of the ABI. Reviewed-by: Marc Zyngier Signed-off-by: Christoffer Dall