kernel/include/linux/irqchip/arm-gic-v3.h, branch linux-5.1.y

irqchip/gic-v3-its: Fix ITT_entry_size accessor

2019-01-31T12:51:33Z

According to ARM IHI 0069C (ID070116), we should use GITS_TYPER's bits [7:4] as ITT_entry_size instead of [8:4]. Although this is pretty annoying, it only results in a potential over-allocation of memory, and nothing bad happens. Fixes: 3dfa576bfb45 ("irqchip/gic-v3-its: Add probing for VLPI properties") Signed-off-by: Zenghui Yu [maz: massaged subject and commit message] Signed-off-by: Marc Zyngier

Merge tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2018-10-26T00:57:35Z

Pull KVM updates from Radim Krčmář: "ARM: - Improved guest IPA space support (32 to 52 bits) - RAS event delivery for 32bit - PMU fixes - Guest entry hardening - Various cleanups - Port of dirty_log_test selftest PPC: - Nested HV KVM support for radix guests on POWER9. The performance is much better than with PR KVM. Migration and arbitrary level of nesting is supported. - Disable nested HV-KVM on early POWER9 chips that need a particular hardware bug workaround - One VM per core mode to prevent potential data leaks - PCI pass-through optimization - merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base s390: - Initial version of AP crypto virtualization via vfio-mdev - Improvement for vfio-ap - Set the host program identifier - Optimize page table locking x86: - Enable nested virtualization by default - Implement Hyper-V IPI hypercalls - Improve #PF and #DB handling - Allow guests to use Enlightened VMCS - Add migration selftests for VMCS and Enlightened VMCS - Allow coalesced PIO accesses - Add an option to perform nested VMCS host state consistency check through hardware - Automatic tuning of lapic_timer_advance_ns - Many fixes, minor improvements, and cleanups" * tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits) KVM/nVMX: Do not validate that posted_intr_desc_addr is page aligned Revert "kvm: x86: optimize dr6 restore" KVM: PPC: Optimize clearing TCEs for sparse tables x86/kvm/nVMX: tweak shadow fields selftests/kvm: add missing executables to .gitignore KVM: arm64: Safety check PSTATE when entering guest and handle IL KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips arm/arm64: KVM: Enable 32 bits kvm vcpu events support arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension() KVM: arm64: Fix caching of host MDCR_EL2 value KVM: VMX: enable nested virtualization by default KVM/x86: Use 32bit xor to clear registers in svm.c kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD kvm: vmx: Defer setting of DR6 until #DB delivery kvm: x86: Defer setting of CR2 until #PF delivery kvm: x86: Add payload operands to kvm_multiple_exception kvm: x86: Add exception payload fields to kvm_vcpu_events kvm: x86: Add has_payload and payload to kvm_queued_exception KVM: Documentation: Fix omission in struct kvm_vcpu_events KVM: selftests: add Enlightened VMCS test ...

irqchip/gic-v3-its: Keep track of property table's PA and VA

2018-10-02T09:37:32Z

We're currently only tracking the page allocated to contain the property table by its struct page. In the future, it is going to be convenient to track both PA and VA for that page instead. Let's do that. Tested-by: Jeremy Linton Tested-by: Bhupesh Sharma Tested-by: Lei Zhang Signed-off-by: Marc Zyngier

irqchip/gic-v3-its: Move pending table allocation to init time

2018-10-02T09:37:30Z

Pending tables for the redistributors are currently allocated one at a time as each CPU boots. This is causing some grief for Linux/RT (allocation from within a CPU hotplug notifier is frown upon). Let's move this allocation to take place at init time, when we only have a single CPU. It means we're allocating memory for CPUs that are not online yet, but most system will boot all of their CPUs anyway, so that's not completely wasted. Tested-by: Jeremy Linton Tested-by: Bhupesh Sharma Tested-by: Lei Zhang Signed-off-by: Marc Zyngier

vgic: Add support for 52bit guest physical address

2018-10-01T12:50:32Z

Add support for handling 52bit guest physical address to the VGIC layer. So far we have limited the guest physical address to 48bits, by explicitly masking the upper bits. This patch removes the restriction. We do not have to check if the host supports 52bit as the gpa is always validated during an access. (e.g, kvm_{read/write}_guest, kvm_is_visible_gfn()). Also, the ITS table save-restore is also not affected with the enhancement. The DTE entries already store the bits[51:8] of the ITT_addr (with a 256byte alignment). Cc: Marc Zyngier Cc: Christoffer Dall Reviewed-by: Eric Auger Signed-off-by: Kristina Martsenko [ Macro clean ups, fix PROPBASER and PENDBASER accesses ] Signed-off-by: Suzuki K Poulose Signed-off-by: Marc Zyngier

Merge tag 'kvmarm-for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

2018-08-22T12:07:56Z

KVM/arm updates for 4.19 - Support for Group0 interrupts in guests - Cache management optimizations for ARMv8.4 systems - Userspace interface for RAS, allowing error retrival and injection - Fault path optimization - Emulated physical timer fixes - Random cleanups

KVM: arm/arm64: vgic: Define GICD_IIDR fields for GICv2 and GIv3

2018-07-21T15:02:19Z

Instead of hardcoding the shifts and masks in the GICD_IIDR register emulation, let's add the definition of these fields to the GIC header files and use them. This will make things more obvious when we're going to bump the revision in the IIDR when we'll make guest-visible changes to the implementation. Reviewed-by: Andrew Jones Signed-off-by: Christoffer Dall Signed-off-by: Marc Zyngier

irqchip/gic-v3-its: Honor hypervisor enforced LPI range

2018-07-16T13:22:19Z

A recent extension to the GIC architecture allows a hypervisor to arbitrarily reduce the number of LPIs available to a guest, no matter what the GIC says about the valid range of IntIDs. Let's factor in this information when computing the number of available LPIs Signed-off-by: Marc Zyngier

irqchip/gic-v3: Expose GICD_TYPER in the rdist structure

2018-07-16T13:22:19Z

Instead of exposing the GIC distributor IntID field in the rdist structure that is passed to the ITS, let's replace it with a copy of the whole GICD_TYPER register. We are going to need some of this information at a later time. No functionnal change. Signed-off-by: Marc Zyngier

irqchip/gic-v3: Add support for Message Based Interrupts as an MSI controller

2018-05-13T13:59:01Z

GICv3 offers the possibility to signal SPIs using a pair of doorbells (SETPI, CLRSPI) under the name of Message Based Interrupts (MBI). They can be used as either traditional (edge) MSIs, or the more exotic level-triggered flavour. Let's implement support for platform MSI, which is the original intent for this feature. Signed-off-by: Marc Zyngier Signed-off-by: Thomas Gleixner Cc: Rob Herring Cc: Jason Cooper Cc: Ard Biesheuvel Cc: Srinivas Kandagatla Cc: Thomas Petazzoni Cc: Miquel Raynal Link: https://lkml.kernel.org/r/20180508121438.11301-8-marc.zyngier@arm.com