kernel/include/linux/firmware/xlnx-zynqmp.h, branch linux-6.1.y

firmware: xilinx: add support for sd/gem config

2022-09-20T15:33:04Z

Add new APIs in firmware to configure SD/GEM registers. Internally it calls PM IOCTL for below SD/GEM register configuration: - SD/EMMC select - SD slot type - SD base clock - SD 8 bit support - SD fixed config - GEM SGMII Mode - GEM fixed config Signed-off-by: Ronak Jain Signed-off-by: Radhey Shyam Pandey Reviewed-by: Claudiu Beznea Signed-off-by: Jakub Kicinski

Merge tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2022-08-10T18:01:44Z

Pull pin control updates from Linus Walleij: "Outside the pinctrl driver and DT bindings we hit some Arm DT files, patched by the maintainers. Other than that it is business as usual. Core changes: - Add PINCTRL_PINGROUP() helper macro (and use it in the AMD driver). New drivers: - Intel Meteor Lake support. - Reneasas RZ/V2M and r8a779g0 (R-Car V4H). - AXP209 variants AXP221, AXP223 and AXP809. - Qualcomm MSM8909, PM8226, PMP8074 and SM6375. - Allwinner D1. Improvements: - Proper pin multiplexing in the AMD driver. - Mediatek MT8192 can use generic drive strength and pin bias, then fixes on top plus some I2C pin group fixes. - Have the Allwinner Sunplus SP7021 use the generic DT schema and make interrupts optional. - Handle Qualcomm SC7280 ADSP. - Handle Qualcomm MSM8916 CAMSS GP clock muxing. - High impedance bias on ZynqMP. - Serialize StarFive access to MMIO. - Immutable gpiochip for BCM2835, Ingenic, Qualcomm SPMI GPIO" * tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (117 commits) dt-bindings: pinctrl: qcom,pmic-gpio: add PM8226 constraints pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM pinctrl: qcom: sm8250: Fix PDC map pinctrl: amd: Fix an unused variable dt-bindings: pinctrl: mt8186: Add and use drive-strength-microamp dt-bindings: pinctrl: mt8186: Add gpio-line-names property ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header pinctrl: amd: Use unicode for debugfs output pinctrl: amd: Fix newline declaration in debugfs output pinctrl: at91: Fix typo 'the the' in comment dt-bindings: pinctrl: st,stm32: Correct 'resets' property name pinctrl: mvebu: Missing a blank line after declarations. pinctrl: qcom: Add SM6375 TLMM driver dt-bindings: pinctrl: Add DT schema for SM6375 TLMM dt-bindings: pinctrl: mt8195: Use drive-strength-microamp in examples Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable" pinctrl: imx93: Add MODULE_DEVICE_TABLE() pinctrl: sunxi: Add driver for Allwinner D1 pinctrl: sunxi: Make some layout parameters dynamic pinctrl: sunxi: Refactor register/offset calculation ...

firmware: xilinx: Add TF_A_PM_REGISTER_SGI SMC call

2022-06-29T12:46:22Z

SGI interrupt register and reset is performed by EEMI ioctl IOCTL_REGISTER_SGI. However, this is not correct use of EEMI call. SGI registration functionality does not qualify as energy management activity and so shouldn't be mapped to EEMI call. This new call will replace IOCTL_REGISTER_SGI and will be handled by TF-A specific handler in TF-A. To maintain backward compatibility for a while firmware driver will still use IOCTL_REGISTER_SGI as fallback strategy if new call fails or is not supported by TF-A. This new design also helps to make TF-A as pass through layer for EEMI calls. So we don't have to maintain PM_IOCTL as EEMI API ID in TF-A. Signed-off-by: Tanmay Shah Acked-by: Michal Simek Link: https://lore.kernel.org/r/20220607224253.54919-1-tanmay.shah@xilinx.com Signed-off-by: Michal Simek

firmware: xilinx: Add configuration values for tri-state

2022-06-28T08:29:38Z

Add configuration values(enable/disable) for tri-state parameter. Signed-off-by: Sai Krishna Potthuri Link: https://lore.kernel.org/r/1655462819-28801-2-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com Signed-off-by: Linus Walleij

firmware: xilinx: add support for IOCTL and QUERY ID feature check

2022-04-22T15:20:03Z

Add support to check if IOCTL ID or QUERY ID is supported in firmware or not. Signed-off-by: Ronak Jain Link: https://lore.kernel.org/r/1649242526-17493-2-git-send-email-ronak.jain@xilinx.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2022-03-28T19:27:35Z

Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...

firmware: xilinx: Add ZynqMP SHA API for SHA3 functionality

2022-03-02T22:49:21Z

This patch adds zynqmp_pm_sha_hash API in the ZynqMP firmware to compute SHA3 hash of given data. Signed-off-by: Harsha Signed-off-by: Kalyani Akula Acked-by: Michal Simek Signed-off-by: Herbert Xu

firmware: xilinx: Add support for runtime features

2022-02-25T11:13:20Z

Add support for runtime features by using an IOCTL call. The features can be enabled or disabled from the firmware as well as the features can be configured at runtime by querying IOCTL_SET_FEATURE_CONFIG id. Similarly, the user can get the configured values of features by querying IOCTL_GET_FEATURE_CONFIG id. Acked-by: Michal Simek Signed-off-by: Ronak Jain Link: https://lore.kernel.org/r/20220209082709.32378-2-ronak.jain@xilinx.com Signed-off-by: Greg Kroah-Hartman

drivers: soc: xilinx: add xilinx event management driver

2021-12-03T15:08:46Z

Xilinx event management driver provides an interface to subscribe or unsubscribe for the event/callback supported by firmware. An agent can use this driver to register for Error Event, Device Event and Suspend callback. This driver only allows one agent per event to do registration. Driver will return an error in case of multiple registration for the same event. This driver gets notification from firmware through TF-A as SGI. During initialization, event manager driver register handler for SGI used for notification. It also provides SGI number info to TF-A by using IOCTL_REGISTER_SGI call to TF-A. After receiving notification from firmware, the driver makes an SMC call to TF-A to get IPI data. From the IPI data provided by TF-A, event manager identified the cause of event and forward that event/callback notification to the respective subscribed driver. After this, in case of Error Event, driver performs unregistration as firmware expecting from agent to do re-registration if the agent wants to get notified on the second occurrence of an error event. Add new IOCTL id IOCTL_REGISTER_SGI = 25 which is used to register SGI on TF-A. Older firmware doesn't have all required support for event handling which is required by the event manager driver. So add check for the register notifier version in the event manager driver. Xilinx event management driver provides support to subscribe for multiple error events with the use of Event Mask in a single call of xlnx_register_event(). Agent driver can provide 'Event' parameter value as ORed of multiple event masks to register single callback for multiple events. For example, to register callback for event=0x1 and event=0x2 for the given node, agent can provide event=0x3 (0x1 | 0x2). It is not possible to register multiple events for different nodes in a single registration call. Also provide support to receive multiple error events as in single notification from firmware and then forward it to subscribed drivers via registered callback one by one. Acked-by: Michal Simek Signed-off-by: Tejas Patel Signed-off-by: Rajan Vaja Signed-off-by: Abhyuday Godhasara Link: https://lore.kernel.org/r/20211129070216.30253-2-abhyuday.godhasara@xilinx.com Signed-off-by: Greg Kroah-Hartman

firmware: xilinx: export the feature check of zynqmp firmware

2021-11-17T15:11:48Z

Export the zynqmp_pm_feature(), so it can be use by other as to get API version available in firmware. Acked-by: Michal Simek Signed-off-by: Rajan Vaja Signed-off-by: Abhyuday Godhasara Link: https://lore.kernel.org/r/20211026042525.26612-4-abhyuday.godhasara@xilinx.com Signed-off-by: Greg Kroah-Hartman