kernel/include/linux/ceph/messenger.h, branch linux-4.15.y

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

libceph: ceph_connection_operations::reencode_message() method

2017-07-07T15:25:15Z

Give upper layers a chance to reencode the message after the connection is negotiated and ->peer_features is set. OSD client will use this to support both luminous and pre-luminous OSDs (in a single cluster): the former need MOSDOp v8; the latter will continue to be sent MOSDOp v4. Signed-off-by: Ilya Dryomov

Merge tag 'ceph-for-4.10-rc1' of git://github.com/ceph/ceph-client

2016-12-16T19:23:34Z

Pull ceph updates from Ilya Dryomov: "A varied set of changes: - a large rework of cephx auth code to cope with CONFIG_VMAP_STACK (myself). Also fixed a deadlock caused by a bogus allocation on the writeback path and authorize reply verification. - a fix for long stalls during fsync (Jeff Layton). The client now has a way to force the MDS log flush, leading to ~100x speedups in some synthetic tests. - a new [no]require_active_mds mount option (Zheng Yan). On mount, we will now check whether any of the MDSes are available and bail rather than block if none are. This check can be avoided by specifying the "no" option. - a couple of MDS cap handling fixes and a few assorted patches throughout" * tag 'ceph-for-4.10-rc1' of git://github.com/ceph/ceph-client: (32 commits) libceph: remove now unused finish_request() wrapper libceph: always signal completion when done ceph: avoid creating orphan object when checking pool permission ceph: properly set issue_seq for cap release ceph: add flags parameter to send_cap_msg ceph: update cap message struct version to 10 ceph: define new argument structure for send_cap_msg ceph: move xattr initialzation before the encoding past the ceph_mds_caps ceph: fix minor typo in unsafe_request_wait ceph: record truncate size/seq for snap data writeback ceph: check availability of mds cluster on mount ceph: fix splice read for no Fc capability case ceph: try getting buffer capability for readahead/fadvise ceph: fix scheduler warning due to nested blocking ceph: fix printing wrong return variable in ceph_direct_read_write() crush: include mapper.h in mapper.c rbd: silence bogus -Wmaybe-uninitialized warning libceph: no need to drop con->mutex for ->get_authorizer() libceph: drop len argument of *verify_authorizer_reply() libceph: verify authorize reply on connect ...

libceph: drop len argument of *verify_authorizer_reply()

2016-12-12T22:09:21Z

The length of the reply is protocol-dependent - for cephx it's ceph_x_authorize_reply. Nothing sensible can be passed from the messenger layer anyway. Signed-off-by: Ilya Dryomov Reviewed-by: Sage Weil

ceph: don't include blk_types.h in messenger.h

2016-11-01T15:43:26Z

The file only needs the struct bvec_iter delcaration, which is available from bvec.h. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

libceph: fix ceph_msg_revoke()

2016-01-21T18:36:08Z

There are a number of problems with revoking a "was sending" message: (1) We never make any attempt to revoke data - only kvecs contibute to con->out_skip. However, once the header (envelope) is written to the socket, our peer learns data_len and sets itself to expect at least data_len bytes to follow front or front+middle. If ceph_msg_revoke() is called while the messenger is sending message's data portion, anything we send after that call is counted by the OSD towards the now revoked message's data portion. The effects vary, the most common one is the eventual hang - higher layers get stuck waiting for the reply to the message that was sent out after ceph_msg_revoke() returned and treated by the OSD as a bunch of data bytes. This is what Matt ran into. (2) Flat out zeroing con->out_kvec_bytes worth of bytes to handle kvecs is wrong. If ceph_msg_revoke() is called before the tag is sent out or while the messenger is sending the header, we will get a connection reset, either due to a bad tag (0 is not a valid tag) or a bad header CRC, which kind of defeats the purpose of revoke. Currently the kernel client refuses to work with header CRCs disabled, but that will likely change in the future, making this even worse. (3) con->out_skip is not reset on connection reset, leading to one or more spurious connection resets if we happen to get a real one between con->out_skip is set in ceph_msg_revoke() and before it's cleared in write_partial_skip(). Fixing (1) and (3) is trivial. The idea behind fixing (2) is to never zero the tag or the header, i.e. send out tag+header regardless of when ceph_msg_revoke() is called. That way the header is always correct, no unnecessary resets are induced and revoke stands ready for disabled CRCs. Since ceph_msg_revoke() rips out con->out_msg, introduce a new "message out temp" and copy the header into it before sending. Cc: stable@vger.kernel.org # 4.0+ Reported-by: Matt Conner Signed-off-by: Ilya Dryomov Tested-by: Matt Conner Reviewed-by: Sage Weil

libceph: stop duplicating client fields in messenger

2015-11-02T22:37:46Z

supported_features and required_features serve no purpose at all, while nocrc and tcp_nodelay belong to ceph_options::flags. Signed-off-by: Ilya Dryomov

libceph: msg signing callouts don't need con argument

2015-11-02T22:37:45Z

We can use msg->con instead - at the point we sign an outgoing message or check the signature on the incoming one, msg->con is always set. We wouldn't know how to sign a message without an associated session (i.e. msg->con == NULL) and being able to sign a message using an explicitly provided authorizer is of no use. Signed-off-by: Ilya Dryomov

libceph: don't access invalid memory in keepalive2 path

2015-09-17T17:14:15Z

This struct ceph_timespec ceph_ts; ... con_out_kvec_add(con, sizeof(ceph_ts), &ceph_ts); wraps ceph_ts into a kvec and adds it to con->out_kvec array, yet ceph_ts becomes invalid on return from prepare_write_keepalive(). As a result, we send out bogus keepalive2 stamps. Fix this by encoding into a ceph_timespec member, similar to how acks are read and written. Signed-off-by: Ilya Dryomov Reviewed-by: Yan, Zheng

libceph: use keepalive2 to verify the mon session is alive

2015-09-08T20:14:30Z

Signed-off-by: Yan, Zheng Signed-off-by: Ilya Dryomov